Jump to content


Photo

BackupSuite


  • Please log in to reply
1306 replies to this topic

#1 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 2 January 2012 - 15:35

After the introduction of the 3.1.1 kernel on the VU + models the backupsuite didn't work properly for these machines because of the changed file system.

The BackupSuite is now adapted and should work again on all VU + models regardless of file system (and of course still on the ET models)

The backup process now takes a little longer than you have been used to but is still acceptable, on my system it takes about 5 minutes compared with previously about 2 minutes and 50 seconds. The images are larger than usual.

The BackupSuite is extensively tested and should now be working properly.

Attached Files


Edited by Pedro_Newbie, 2 January 2012 - 15:35.


Re: BackupSuite #2 kaneguru

  • Senior Member
  • 198 posts

+1
Neutral

Posted 2 January 2012 - 15:47

thx. i will try it.
1. VU+ Ultimo VTi5.0 Samsung LCD
2. ET 9000 PLi3.0 Samsung LCD

Wavefrontier 0,8°-4,8°-9°-13°-19,2°-23°-28°

Re: BackupSuite #3 kaneguru

  • Senior Member
  • 198 posts

+1
Neutral

Posted 2 January 2012 - 15:59

works fine !!!
1. VU+ Ultimo VTi5.0 Samsung LCD
2. ET 9000 PLi3.0 Samsung LCD

Wavefrontier 0,8°-4,8°-9°-13°-19,2°-23°-28°

Re: BackupSuite #4 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 2 January 2012 - 16:15

thnx!

Re: BackupSuite #5 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 2 January 2012 - 16:25

After the next build also on our feeds.... I also completed the ultimo feed...

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: BackupSuite #6 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 2 January 2012 - 17:32

Thanks, maybe someone with a Ultimo can confirm the backupsuite is working on an Ultimo?

Re: BackupSuite #7 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 2 January 2012 - 17:51

Please don't use the USB only option to make a back-up, it seems there are problems with this option.

Re: BackupSuite #8 gutosie

  • Member
  • 9 posts

0
Neutral

Posted 2 January 2012 - 18:26

Back-up Plugins for Ultimo works fine !!! :D

Re: BackupSuite #9 dany

  • Senior Member
  • 160 posts

+7
Neutral

Posted 2 January 2012 - 18:27

thank you very much pedro for a great job
it works fine
on my system it takes 4 min
i used only full back-up on HDD/USB .... as you said

regards
pli image is de beste

Re: BackupSuite #10 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 2 January 2012 - 19:08

The USB only version works fine on all ET models, because of the different way of handling the VU's it's necessary to copy the whole system in the work directory, sadly this seems to not work on the USB-stick.

It shall take some time because I don't have to much opportunity to test the whole procedure (it seems like someone over here want to watch TV using the VU+, can you imagine, watching TV when you can tinker around with the VU+ :D )


@ Gutosie
Thanks for the confirmation!

Edited by Pedro_Newbie, 2 January 2012 - 19:10.


Re: BackupSuite #11 MiLo

  • PLi® Core member
  • 14,042 posts

+298
Excellent

Posted 2 January 2012 - 19:36

...because of the different way of handling the VU's it's necessary to copy the whole system in the work directory, sadly this seems to not work on the USB-stick...


Probably this commit should fix that:
http://openpli.git.s...188bab9f7ddaf8a
Real musicians never die - they just decompose

Re: BackupSuite #12 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 2 January 2012 - 19:43

That would be great, this means the whole copy procedure to the $WORKDIR/root would be obsolete like the handling of the ET's?

Re: BackupSuite #13 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 3 January 2012 - 07:03

Just before going off to work a new version of the BackupSuite, everything is working fine now thanks to Milo for the adoption of mkfs.ubifs.

But options are now tested and also restored without a problem.

Attached Files



Re: BackupSuite #14 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 3 January 2012 - 09:08

..But options are now tested and also restored without a problem.


Sorry typo must be: Both options are tested and also restored without a problem

Re: BackupSuite #15 morhan

  • Member
  • 4 posts

0
Neutral

Posted 3 January 2012 - 10:46

I getthe followingerrorplease help
backup suite 8.0

VU+ SOLO
BACK-UP TOOL, FOR MAKING A COMPLETE BACK-UP
Version 8.0 - 02-01-2012
Pedro_Newbie (pedro.newbie@gmail.com)

Please be patient, a backup will now be made, because of the used filesystem the back-up will take about 5-7 minutes for this system.

Create: root.ubifs
Create: kerneldump

Almost there... Now building the USB-Image!
Image creation FAILED!
Probable causes could be:
-> no space left on back-up device
-> no writing permission on back-up device


Time required for this process:
4:16

Re: BackupSuite #16 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 3 January 2012 - 12:16

Please try the new version and report if you still have problems, if so please state which option you are using, a backup to HDD/USB or the USB only version.
Also if this error is coming back check if the backup is properly made.

Re: BackupSuite #17 morhan

  • Member
  • 4 posts

0
Neutral

Posted 3 January 2012 - 13:17

not instal. new versiyon
sorry my english bad :(

OpenEmbedded Linux vusolo


openpli 2.1 vusolo

vusolo login: root
root@vusolo:~# cd /tmp
root@vusolo:/var/volatile/tmp# opkg install /tmp/*.ipk
Installing enigma2-plugin-extensions-backupsuite (8.1) to root...
Installing mkfs-ubifs (1.4.6-r0.1) to root...
Downloading http://downloads.pli...0.1_mipsel.ipk.
wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:
* opkg_download: Failed to download http://downloads.pli...r0.1_mipsel.ipk, wget returned 1.
* opkg_install_pkg: Failed to download mkfs-ubifs. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package enigma2-plugin-extensions-backupsuite.
root@vusolo:/var/volatile/tmp#

Re: BackupSuite #18 morhan

  • Member
  • 4 posts

0
Neutral

Posted 3 January 2012 - 13:59

Posted Image

Posted Image

Re: BackupSuite #19 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 3 January 2012 - 16:22

The problems you are having are caused by the package mkfs-ubifs which can't be found
Please try the following
-Start telnet, such as for example DCC_E2
- give the command: opkg update
- give the command: opkg install mkfs-ubifs

This should install the required packet, if not then I'm out of clues.

Maybe someone from Pli can shed some light then.

Re: BackupSuite #20 bacicciosat

  • Senior Member
  • 540 posts

+100
Excellent

Posted 3 January 2012 - 16:34

The problems you are having are caused by the package mkfs-ubifs which can't be found
This should install the required packet, if not then I'm out of clues.
........
Maybe someone from Pli can shed some light then.


Dear Pedro, i am testing your suite to make a plugin for Bh images.
I had already on bh the patch used by Milo and i can confirm that the first version works with Ultimo tested both in hdd and in usb and the second version doesn't work.

P.s. i am using an own plugin and a modified version of your script backupsuite.sh
I will use this header in the script to leave all credits.
Let me know if it is ok for you.

###############################################################################
# FULL BACKUP UYILITY
# Tools original by scope34 with additions by Dragon48 & DrData
# modified by Pedro_Newbie (pedro.newbie@gmail.com)
# modified by meo
###############################################################################




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users