- when on start of plugin does not exist some input/output directory, is used /tmp instead of GSOD :-)
- support for DVB-T (tried) and DVB-C
- some cosmetics
Posted 8 July 2013 - 19:48
Seeking for help - I installed setpicon from install software library as well as picons for my sat; it worked well, allowed change picons - all OK, until I changed the input directory to external HDD that is connected via esata. When I browse in the setpicon it does show the picons from input folder but does not allow me to assign it to channel. What can be wrong there?
thanks a lot for advice - I am linux novice so sorry for language, probably not too correct
Posted 8 July 2013 - 20:18
input directory on eSata and output directory on eSata or where ? Some error/warning message or what ( via telnet: init 4 (enter) and then: enigma2 (enter) and then try use plugin, what will be displayed. After testing use Ctrl+C, init 3 (enter) )
Posted 9 July 2013 - 22:27
novice as I said
input is on eSata; output in the root, same place as original picon directory, just in dir called picon_out
there is no error message, it just does not accept "OK" when I try to select picon in the setpicon plugin
to answer your second question - it is not assigned for channel in the plugin nor displayed in the skin; when I installed the picons library it actually assigned picons to couple of channels and those are shown in the skin properly
I did the test - here is the console output for following action - plugin started, select picon for a channel w/o any picon assigned:
action -> WizardActions ok
[SetPicon] fallback to default translation for service reference
[SetPicon] fallback to default translation for name
[SetPicon] fallback to default translation for all picon's directories
[SetPicon] fallback to default translation for input directory only
[SetPicon] fallback to default translation for no
[SetPicon] fallback to default translation for filename
[SetPicon] fallback to default translation for full path
[SetPicon] fallback to default translation for no
[SetPicon] fallback to default translation for by providers
[SetPicon] fallback to default translation for by orbital position
[SetPicon] fallback to default translation for SetPicon
[SetPicon] fallback to default translation for exit plugin
[SetPicon] fallback to default translation for set and save selected picon
[SetPicon] fallback to default translation for menu
[SetPicon] fallback to default translation for go to previous picon
[SetPicon] fallback to default translation for go to next picon
[SetPicon] fallback to default translation for go to next service
[SetPicon] fallback to default translation for go to previous service
[SetPicon] fallback to default translation for exit plugin
[SetPicon] fallback to default translation for save service's picon
[SetPicon] fallback to default translation for search picons or service
[SetPicon] fallback to default translation for options
[SetPicon] fallback to default translation for go to first picon
[SetPicon] fallback to default translation for go to last picon
[SetPicon] fallback to default translation for go to -5 picons
[SetPicon] fallback to default translation for go to -100 picons
[SetPicon] fallback to default translation for go to -1000 picons
[SetPicon] fallback to default translation for go to +5 picons
[SetPicon] fallback to default translation for go to +100 picons
[SetPicon] fallback to default translation for go to +1000 picons
[SetPicon] fallback to default translation for delete selected picon
[SetPicon] fallback to default translation for refresh
[SetPicon] fallback to default translation for switch searching to service
[SetPicon] fallback to default translation for switch searching to picons
[SetPicon] fallback to default translation for Cancel
[SetPicon] fallback to default translation for Save current
[SetPicon] fallback to default translation for Search
[SetPicon] fallback to default translation for Options
[SetPicon] fallback to default translation for Please wait to finishing picon's list...
[SetPicon] fallback to default translation for SetPicon
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=0 bg=#00000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=0 bg=#00000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=0 bg=#00000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=0 bg=#00000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=0 bg=#00000000
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=0 bg=#00000000
[SetPicon] fallback to default translation for Terrestrial
[SetPicon] fallback to default translation for Cable
[SetPicon] fallback to default translation for Stream
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/SetPicon/img/empty.png
[SetPicon] fallback to default translation for Reading picons...
[SetPicon] fallback to default translation for Select picon and press OK to assign to current service:
[SetPicon] fallback to default translation for Select picon and save it with OK to output directory:
[Picload] decode picture... /hdd/picon/1_0_1_423_7_1111_E080000_0_0_0.png
[Picload] decode picture... /hdd/picon/1_0_1_428_7_1111_E080000_0_0_0.png
[Picload] decode picture... /hdd/picon/08w_bloomberg_tv_eu.png
[Picload] decode picture... /hdd/picon/1_0_1_7667_2BF_600_E080000_0_0_0.png
[Picload] decode picture... /hdd/picon/1_0_1_1FE_1B_2C0_E080000_0_0_0.png
[SetPicon] fallback to default translation for current:
[SetPicon] fallback to default translation for Search: picons
action -> OkCancelActions ok
[SetPicon] copy /hdd/picon/08w_bloomberg_tv_eu.png /picon/CT_Sport.png
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/SetPicon/img/empty.png
Posted 5 July 2015 - 16:46
@ims Hi
I've been using your excellent "Setpicon" plugin for a couple of years now. Thanks its been great.
However I am now in the process of changing my picon's from "service ref:" to "service name" using the script by Huevos on this forum.
This is where I have run into a problem.
Example: SKY Germany and SKY UK have a channel with the same name "Sky Select"
I was hoping that in your plugin that "Saving name with Orbital Position" might help but for some reason this does not give any response from the plugin.
I can of course rename each offending picon differently, then search for it via your "setpicon-plugin" and assign it to the correct service.
Or maybe I'm approaching this from the wrong direction, so any help would be appriciated.
Thanks Col
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 5 July 2015 - 18:27
I think, in this case you must for one of this same service name using picon as service reference.
"Saving name with Orbital Position" - it was made long time ago (when was used for picons service reference only) - for saving all picons into format servicename_orbitalposition.png - for better orientation in a lot of files.
Posted 6 July 2015 - 07:02
Thanks for the quick reply.
So if I read correctly. To save as "servicename_orbitalposition.png" I must start with "serviceref. png" first ?
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 6 July 2015 - 08:00
It works still ... If is set "Save picons as" name and "Save name with orbital position" yes, then it will be saved f.eg. instead ct1hd.png as ct1hd_23.5E.png.
But again - it is useful for user only, not for mechanism for displaying picons... If you have 2 defferent services with same name, for picon's mechanism you must use for one service_reference.png (it has still priority) and for 2nd use service_name.png
Edited by ims, 6 July 2015 - 08:03.
Posted 6 July 2015 - 08:44
Thanks for your patience,
I understand, "it is useful for user only, not for mechanism for displaying picons". As it is my intention to manualy map any offending picons later.
What I was hoping for was to add the orbital position tag to the correct picon, then copy over the other picon with the same sevice name. However I cant get setpicon to tag anything. Save as service ref or sevice name works fine, I just cant get it to add orbital position.
FYI, this all came about as over the years (my bad) my picon folder (28e, 23.5e, 19e, 13e & 30w) has grown to 8000 picons by service ref: In some cases there must more than 50 of the same picon but with different service refs. After converting to sevice name, this now down to 3000
Edited by ColinB, 6 July 2015 - 08:45.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
0 members, 1 guests, 0 anonymous users