168 replies to this topic

[maigais]

I took today's image renewals 11/06/2013 02:05 - 42.20MB
Nothing has changed
skrenshot shown in Figure freeze IPTV
DVBT and the channel does not work  

 

Attached Files

•  dvb-t.jpg   78.31KB   91 downloads

Edited by maigais, 11 June 2013 - 10:09.

[maigais]

and return to the old image.
lo enigma. log of the last renewal

 

 

 

Attached Files

•  enigma log.txt   8.25KB   28 downloads

[Erik Slagter]

Which receiver, which tuner?

[maigais]

DM 800HD ,OpenPLi-2.1 , Digital USB DVB-T HDTV TV Tuner Recorder Receiver  af9015

[Erik Slagter]

DM 800HD ,OpenPLi-2.1 , Digital USB DVB-T HDTV TV Tuner Recorder Receiver  af9015

I think there is the problem.

 

Is there anybody with a similar receiver (af9015 driver)?

 

Please keep in mind the dm800 is very "light" in cpu power, I've had similar problems using a DVB-C stick, which works fine on a Max Digital XP1000 receiver.

[littlesat]

Is there a driver for this stick on that ancient kernel???

[maigais]

Understand me well,
Problems have arisen recently
  The image of the month of May worked well 

[maigais]

cat /proc/bus/usb/devices

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.4-dm800 ohci_hcd
S:  Product=BRCM OHCI
S:  SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.4-dm800 ohci_hcd
S:  Product=BRCM OHCI
S:  SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.18-7.4-dm800 ehci_hcd
S:  Product=BRCM EHCI
S:  SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=14cd ProdID=8123 Rev= 2.01
S:  Manufacturer=SDMMC MA8123
S:  Product=USB MassStorage Device
S:  SerialNumber=812320080329
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=15a4 Prod
ID=9016 Rev= 2.00
S:  Manufacturer=Afatech
S:  Product=DVB-T 2
S:  SerialNumber=010101010600001
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=dvb_usb_af9015
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=dvb_usb_af9015
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=64ms
root@dm800:~#

[littlesat]

Probably a side effect regards the build server troubles...

and what about..

 

dmesg

lsusb

 

??

Edited by littlesat, 13 June 2013 - 18:41.

[maigais]

with today's updates
Look at the beginning of IPTV for about 30min
then switch to the channel DVBT
image or video is not

 

 

 

root@dm800:~# lsusb                        
Bus 003 Device 001: ID 0000:0000           
Bus 002 Device 001: ID 0000:0000           
Bus 001 Device 003: ID 15a4:9016           
Bus 001 Device 002: ID 14cd:8123 Super Top 
Bus 001 Device 001: ID 0000:0000           
root@dm800:~#                              

Attached Files

•  dmesg.log.txt   14.87KB   5 downloads

Edited by maigais, 13 June 2013 - 20:26.

[maigais]

Tried out an update to the date of 06.14.2013
There is no change

I have a feeling that the DVBT gone slumber camera view IPTV
and then not wake up

DVBT switches the channel and waiting 1 min,
  message appears: "transpodera data can not be found"

Enigma restart and start working DVBT channel

[pinkopallino69]

hello

same problem here

i have dm800, openpli 2.1 , dvbt pen a-867

t

dvbt works perfectly with image build since marh or april...some days ago i have updated enigma2 and i seen dvbt not working properly...i have to restart enigma2 to have it works...zapping between dvbt channels i got black screen ...also disapperaed from info the data about transponder, frequency etc etc...after 1 minute on black screen i got "pat not found error"...if i restart enigma2 i got image, but after a few zap i got blck screen again...i didn't have this issue with old builds (about march or april 2013).

thanks

[maigais]

Finally, I'm not the only !!!!!

[littlesat]

I think this might be a difficult one... It starts with the fact this box is running on an ancient kernel...
I suggest it stop performing well post the buildserver was repaired...

[Happysat]

No it was doing this before the build server crash.

 

I got this issue (described above on the 800hd with a Hauppauge Nova DVB-T Stick) on 6 may builds allready before my last one on 25 april is fine, on 7 may Pli server did crash.

 

It (tha bug) did happen with the commits from 2 may arround that time frame http://sourceforge.n...da75/log/?path=

 

Also another issue did appear to me in that time frame, streaming results in a crash/reboot.

 

I have to stay on e2 25 April..

Edited by Happysat, 15 June 2013 - 16:37.

[maigais]

tested with today's updates, 6/15/2013
nothing has changed
from the start everything was fine but after changing channel
the problems start
skrenshowt shows the signal
but the video and audio are not
skrenshowt appears to freeze IPTV Channels
But in general the tv screen black image

 

 

 

 

 

Attached Files

•  info dvbt.jpg   119.03KB   60 downloads
•  mesends.jpg   98.71KB   59 downloads

[maigais]

tested with today's updates, 6/16/2013
nothing has changed

add enigma2 full log

Attached Files

•  enigma2.log.txt   31.19KB   5 downloads

[Erik Slagter]

FilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.
eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!

Is this while watching DVB or while watching IP?

[maigais]

it is switching from one channel to another,
dvb-t from channel to channel IPTV,
or vice versa

Edited by maigais, 16 June 2013 - 08:42.

[maigais]

FilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.
eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!
not pauseable.

eFilePushThread *read error* (Success) - not yet handled
wait for driver eof ok
reached EOF, but we are in stream mode. delaying 1 second.

eDVBChannel: End of file!

Is this while watching DVB or while watching IP?

  

 

channel IPTV

Edited by maigais, 16 June 2013 - 09:13.