Solo2 want to use USB DVB-S2 tuner http://www.linuxtv.o...DVB-S2_7500_USB. in ubuntu it works fine. firmware is copied to the /lib/firmware. but the new /dev/dvb device does not appear. means drivers on the system. whether such drivers in the future?
Solo2 and DVB-S2 Prof 7500
Started by serhi999, 04 Nov 2013 08:58
3 replies to this topic
Re: Solo2 and DVB-S2 Prof 7500 #2
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 4 November 2013 - 16:15
Most probably you need the following drivers:
kernel-module-stb6100 - 3.XXX - Linux Kernel stb6100 kernel module; STB6100 Silicon tuner kernel-module-stv090x - 3.YYY - Linux Kernel stv090x kernel module; STV090x Multi-Std Broadcast frontend opkg update opkg install kernel-module-stb6100 opkg install kernel-module-stv090x reboot
Also running lsusb and dmesg after reboot and posting output here really helps people to understand what the problem might be.
(Drivers on Ubuntu are preinstall, same does not apply for embedded boxes)
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Solo2 and DVB-S2 Prof 7500 #3
-
- Member
- 2 posts
0
Neutral
Posted 7 November 2013 - 00:17
Thanks, it worked! The third tuner appeared in the system)) the fact that the mode of a virtual loop between tuners A and B does not work on openpli. Because of this, it's time to put the basic system Black Hole
Re: Solo2 and DVB-S2 Prof 7500 #4
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 7 November 2013 - 04:27
Do you know how BH fixed that?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
