Jump to content


Photo

Getting WandTV DVB-T Stick To Work OpenPli 4.0

dvb-t dvb tuner

  • Please log in to reply
34 replies to this topic

#1 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 19 November 2013 - 12:59

Hi All

Trying to to get this terrestrial stick working under latest (this month) OpenPli - using Octagon SF8 HD box  - same as Max Digital XP1000

 

here is the stick

http://image.ec21.co...DVB-T_Stick.jpg

 

For this or any DVB-T stick - Is it a simple case of copying the correct firmare (.fw) file to /lib/firmware/ - and then reboot - are there any other steps needed ?

 

Once you plug in the tuner into the USB slot should it then show up under Tuner config under Service Searching in the menu ?

 

 

 



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #2 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 19 November 2013 - 19:15

According to LinuxTV (http://www.linuxtv.o..._Devices#WandTV) WandTV uses Afatech AF9035.

So you need to install the following:
opkg update
opkg install enigma2-plugin-drivers-dvb-usb-af9035
reboot
Good luck.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #3 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 20 November 2013 - 16:07

thank you athoik - will try this



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #4 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 20 November 2013 - 19:18

thanks athoik - driver works perfectly - hopefully this will help other users of WandTV DVB-T device



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #5 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 23 November 2013 - 00:07

well ... almost perfect - weird its not there on a reboot - tuner has disappeared - redid your instructions in post #2

and it still does not reappear - why would it disappear on a reboot I wonder - and then after reinstalling not appear - it's like the driver is not getting fully installed - is there  a command to remove it ?

 

and then I will try to reinstall (or any other suggestions)  - these dvb-t devices are troublesome :)


Edited by dmm1000, 23 November 2013 - 00:08.


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #6 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 23 November 2013 - 00:12

The command is opkg remove "package"

Strange that it worked and now it doesn't..
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #7 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 23 November 2013 - 00:40

usb extension lead appears to have gone faulty ... that's it plugging tuner directly without using extension lead works again

thank you athoik - all fine



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #8 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 28 February 2014 - 22:50

hi athoik / fellow members

 

- dont think the problem was the usb extension lead

unfortunately i have to revisit this post again to seek help

the wand dvb-t stick worked for a while maybe a week or so and i gave up - so i am back trying again and looking for help

 

i have updated to latest open pli 4 for Xp1000 / Octagon SF8 - 27th Feb 2014 version

 

The proper firmwares are in the directory for the Wand TV

I have retried your instructions in post #2 athoik - it said already installed - so i even did a force re-install

 

i am getting messages "kernel tainted " and it seem to detect my dvb-t stick as a DVB-S2 device

 

I have attached some screenshots of my dmesg / grep / lsusb commands to try and debug

 

 

 

https://drive.google...dit?usp=sharing

 

https://drive.google...dit?usp=sharing

 

It would not allow me to post as images so i gave URLs instead

 

 

 

here are some screenshots of my efforts - but now I am stuck and need any help i can get - any ideas / experiences like this ?



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #9 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 28 February 2014 - 22:57

the Wand Tv device also shows up in system/settings/input devices - as an input device - seems to me as if it thinks its a keyboard ??



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #10 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 2 March 2014 - 01:13

anyone any suggestions ?



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #11 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 2 March 2014 - 14:37

Screenshot%20from%202014-03-02%2013:30:3

here is an lsmod i did - does this look ok ?

 

help ... :) i am literally at the limits of my lnux knowledge here 



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #12 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 2 March 2014 - 14:58

this is annoying - i cannot edit the rubbish i posted in the previous post - why is it not allowing me to edit delete my posts ?

 

so i have to make another post ............. anyhow ...........................

 

my debugging - can we tell anything from it .......

 

LSMOD command

 

root@xp1000:~# lsmod
Module                  Size  Used by
ipv6                  337278  22 
dvb_usb_af9035         13191  0 
dvb_usb_v2             14606  1 dvb_usb_af9035
dvb                  6632077  7 
xp1000_3               32590  1 dvb
xp1000_2               22309  0 
xp1000_1                6729  3 dvb,xp1000_2,xp1000_3
 
DMESG command
 
root@xp1000:~# dmesg | grep dvb
dvb: module_layout: kernel tainted.
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
usb 1-1: dvb_usb_v2: 2nd usb_bulk_msg() failed=-145
dvb_usb_af9035: probe of 1-1:1.0 failed with error -145
usbcore: registered new interface driver dvb_usb_af9035

 

 

 

help ...  :) i am literally at the limits of my lnux knowledge here 



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #13 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 March 2014 - 18:22

can you post full dmesg?


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #14 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 2 March 2014 - 21:03

thanks athoik - tried to make attachment but couldnt see option

here is the whole thing

 

Linux version 3.12.1 (build@buildserver) (gcc version 4.8.2 (GCC) ) #1 Sat Feb 22 04:53:46 CET 2014
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e853000@0x007ad000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8075a1e0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235608K/262144K available (6046K kernel code, 283K rwdata, 1188K rodata, 212K init, 113K bss, 26536K reserved)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 501 MHz (250.509 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 497.66 BogoMIPS (lpj=248832)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
EBI CS2: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15
 
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
usb 1-1: new high-speed USB device number 2 using ehci-brcm
input: Afa Technologies Inc. AF9035A USB Device as /devices/platform/ehci-brcm.0/usb1/1-1/1-1:1.1/input/input0
hid-generic 0003:15A4:1001.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-ehci_hcd-1/input1
usb 1-2: new high-speed USB device number 3 using ehci-brcm
UBI: scanning is finished
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1978447748
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 41
UBIFS: background thread "ubifs_bgt0_0" started, PID 42
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 35EDFEF1-71BB-4CEA-8702-E946E8B3908F, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 212K (8075b000 - 80790000)
Algorithmics/MIPS FPU Emulator v1.5
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c-core: driver [ch455] using legacy suspend method
i2c-core: driver [ch455] using legacy resume method
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input1
input: dreambox advanced remote control (native) as /devices/virtual/input/input2
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input3
usb 1-1: dvb_usb_v2: 2nd usb_bulk_msg() failed=-145
dvb_usb_af9035: probe of 1-1:1.0 failed with error -145
usbcore: registered new interface driver dvb_usb_af9035
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #15 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 March 2014 - 21:20

input: Afa Technologies Inc. AF9035A USB Device as /devices/platform/ehci-brcm.0/usb1/1-1/1-1:1.1/input/input0
hid-generic 0003:15A4:1001.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-ehci_hcd-1/input1

 
Hi, it seems your device is recongized as Keyboard!
 
It is a know isue read here (General important note! (1) USB DVB is wrongly identified as a HID device): http://linuxtv.org/w...Cap_DVB_T_Stick
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #16 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 2 March 2014 - 22:12

thanks athoik
i went to the link and had a look at the fixes
the file usbhid.conf was not present at  /etc/modprobe.d/ so i have created the file usbhid.conf in /etc/modprobe.d/
and put the line :     options usbhid quirks=0x15a4:0x1001:0x0004 ........... in it and saved it 
 
I rebooted - so i have only done step 1 of the fix
 
step 2 instructs me to do as follows :
 
2. if HID driver is incorporated into kernel, these boot parameters must be appended:
usbhid.quirks=0x15a4:0x1001:0x0004
this goes in, i.e. /boot/grub/menu.lst (grub.conf) , or other means of linux bootconfig.
 
....so after exploring the "boot" folder - there are no other folders in there - so i dont have a "grub.conf" file to edit ??
 
what should i do now - is there an equivalent startup / menu.lst boot config file that i need to amend (or create from new) 
in which i put this line into : usbhid.quirks=0x15a4:0x1001:0x0004
 
 
so i have done step 1. (created usbhid.conf) - but i am stuck at step 2 as there is no "grub" folder - and i want to proceed slowly to get this right
 
then there is the instruction further down the page 
 
Compiling with Linux kernel 3.x.y. Needs small patching of the source
 
 
hope i dont need to do that as it looks scary :)
 
 
 
here is the latest dmesg BELOW - still looks like it thinks its a keyboard - is there any easy way i can easilty attach a text file here ?? 
===========================================================================================================
 
 
Linux version 3.12.1 (build@buildserver) (gcc version 4.8.2 (GCC) ) #1 Sat Feb 22 04:53:46 CET 2014
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e853000@0x007ad000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8075a1e0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235608K/262144K available (6046K kernel code, 283K rwdata, 1188K rodata, 212K init, 113K bss, 26536K reserved)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 501 MHz (250.517 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 497.66 BogoMIPS (lpj=248832)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
EBI CS2: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15
 
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
usb 1-1: new high-speed USB device number 2 using ehci-brcm
input: Afa Technologies Inc. AF9035A USB Device as /devices/platform/ehci-brcm.0/usb1/1-1/1-1:1.1/input/input0
hid-generic 0003:15A4:1001.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-ehci_hcd-1/input1
usb 1-2: new high-speed USB device number 3 using ehci-brcm
UBI: scanning is finished
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1978447748
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 41
UBIFS: background thread "ubifs_bgt0_0" started, PID 42
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 35EDFEF1-71BB-4CEA-8702-E946E8B3908F, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 212K (8075b000 - 80790000)
Algorithmics/MIPS FPU Emulator v1.5
usbcore: registered new interface driver tpm
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c-core: driver [ch455] using legacy suspend method
i2c-core: driver [ch455] using legacy resume method
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input1
input: dreambox advanced remote control (native) as /devices/virtual/input/input2
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input3
usb 1-1: dvb_usb_v2: 2nd usb_bulk_msg() failed=-145
dvb_usb_af9035: probe of 1-1:1.0 failed with error -145
usbcore: registered new interface driver dvb_usb_af9035
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE


Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #17 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 2 March 2014 - 23:10

We need a kernel patch for usbhid https://git.kernel.o.../tags/v3.14-rc4, https://git.kernel.o.../tags/v3.14-rc4

Edited by athoik, 2 March 2014 - 23:13.

Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #18 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 2 March 2014 - 23:33

thanks athoik

that code looks like its old - the dates seems to say about 2007 - surely it should be included in the recent kernels ?

 

is that something i should attempt to do ? - to be honest i wouldnt know where to start - as im a total newbie with linux 

 

is it something each user has to do - ie flash their set top box with this patch ? - thanks



Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #19 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 3 March 2014 - 11:21

Hi,


I think patch is quite simple (the idea is to add stick to ignore list as the command does) here is what i did:
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index e80da62..e01f55e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2093,6 +2093,10 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ADS_TECH, USB_DEVICE_ID_ADS_TECH_RADIO_SI470X) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9035_1000) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9035_1001) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9035_1002) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9035_1003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_20) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f0296a5..cad6dde 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -45,6 +45,10 @@
 
 #define USB_VENDOR_ID_AFATECH		0x15a4
 #define USB_DEVICE_ID_AFATECH_AF9016	0x9016
+#define USB_DEVICE_ID_AFATECH_AF9035_1000	0x1000
+#define USB_DEVICE_ID_AFATECH_AF9035_1001	0x1001
+#define USB_DEVICE_ID_AFATECH_AF9035_1002	0x1002
+#define USB_DEVICE_ID_AFATECH_AF9035_1003	0x1003
 
 #define USB_VENDOR_ID_AIPTEK		0x08ca
 #define USB_DEVICE_ID_AIPTEK_01		0x0001
Here you can download the resulting image including af9035 driver.
 
openpli-4-xp1000_usb.zip 47.1 MB

@dmm1000, please try and report if it worked for you

@OpenPLi, here is the above patch (standalone) and OE patch.

Attached File  0001-HID-Ignore-AFATECH-AF9035-1000-1001-1002-1003-device.patch.txt   2.12KB   11 downloads
Attached File  0001-HID-Ignore-AFATECH-AF9035-1000-1001-1002-1003-device.OpenPLi.patch.txt   4.04KB   5 downloads
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Getting WandTV DVB-T Stick To Work OpenPli 4.0 #20 dmm1000

  • Senior Member
  • 43 posts

0
Neutral

Posted 4 March 2014 - 20:04

thanks athoik so much for your personal efforts 

I am just back from a 2 day trip and will look at this later this week and will attempt some of these things and yes i will report back

really appreciate your help




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users