Posted 25 June 2014 - 16:04
As there are no new openpli-3.0 builds for over a month now but we are still confronted with sort DDOS attacks for the openpli-3.0 feed index request without ever an ipk being downloaded, it has been decided to remove the openpli 3.0 feeds in a short while.
We encourage people still using openpli-3.0 to upgrade to openpli-4
Posted 27 June 2014 - 09:12
Did anyone setup a mirror jet?
I'm in need of a few packages for my dm 800hdse
Edited by bieraap, 27 June 2014 - 09:16.
Posted 27 June 2014 - 09:21
The latest image for the DM800SE is OpenPLi 4, so upgrading might be a better solution.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 July 2014 - 19:21
Is the openpli-3.0 feed already offline? I am trying to install Openpli 3 on an Xtrend ET4000, but after flashing, the StartWizzard cannot even install cccam...
Posted 6 July 2014 - 20:05
yes, since June 25, thats why you cannot install plugins
on the Glassfibre 1GB DVB-C...
Posted 6 July 2014 - 22:01
That's a pity, looks like I'm a few days too late...
Is there a download location for openpli 3.0 plugins for manual installation?
Posted 6 July 2014 - 22:37
Posted 7 July 2014 - 07:58
Any box that can run OpenPLi 3 runs better with OpenPLi 4, so why do you still want to install 3?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 July 2014 - 12:17
The reason why I need an older image for the ET4000, is because of a HDMI problem with certain TV sets, that has been introduced in newer images and that has not been fixed.
http://openpli.org/f...-xtrend-et4000/
http://openpli.org/f...kernel-drivers/
Edited by Stan, 7 July 2014 - 12:18.
Posted 7 July 2014 - 17:24
Those threads are over a year old. If that is still not solved, perhaps Xtrend needs a good kicking...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 July 2014 - 00:26
Yeah, I agree, but until Xtrend fixes the issue, there is no other solution than to stay on openPLi 3.
That being the case, would you consider to keep the openPLi 3.0 feed alive for just a bit longer?
Posted 8 July 2014 - 07:55
Unfortunately, no.
Some clone manufacturers thought it'll be a good idea to have a hacked OpenPLi for their boxes, have those use our feeds, and do automatic scheduled updates. Which completely swamped our download mirrors with terabytes of downloads. So we were forced to stop it, earlier than planned.
I'll see if I can bring this issue to Xtrend's attention. Usually they are quite quit in fixing driver issues, so perhaps they are not aware of this problem.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 July 2014 - 08:45
Xtrend has been informed of this issue. So now we'll have to wait and see.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 July 2014 - 10:00
if it is just a driver issue, and the kernel is more or less the same, why not take openpli-4 but use the drivers from your older image.
Alternatively, you can download the build environment for openpli-3 and create an image yourself.
Posted 8 July 2014 - 11:31
Thanks WanWizard for informing Xtrend. In case they need this information: the problem (no image, no sound on HDMI, when you turn on the ET4000 first and the TV-set after) appears for instance on Panasonic TH37PX80E and TH32LZD80F. On a Panasonic TX-P42X10E everything works fine.
@mirakels
I do have an old openPLi3 image (nightly build before new drivers) which I can install on the box. I only need a few extensions. With the feed in place this was a matter of minutes.
Posted 8 July 2014 - 11:32
If that is the only problem, the workaround is very simple? Switch the ET on first, and use HDMI-CEC to have it switch the TV on?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 July 2014 - 12:05
@WanWizard
The workaround is the other way around. The TV must be on first, otherwise no picture.
Posted 8 July 2014 - 15:02
@mirakels
I do have an old openPLi3 image (nightly build before new drivers) which I can install on the box. I only need a few extensions. With the feed in place this was a matter of minutes.
Yes, but you will not be able to enjoy the new and future features of opnepli-4.
What I mean is you backup the working drivers, install openpli-4, remove the dvb modules package, install the working drivers manually and off you go.
The kernels are the same for openpli-3 and 4 as far as I can see.
Posted 8 July 2014 - 15:23
@WanWizard
The workaround is the other way around. The TV must be on first, otherwise no picture.
Ah, ok, misunderstood what you wrote then.
Still, the same solution applies, you can use CEC to switch the box on when you switch the TV on too...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 July 2014 - 19:05
The kernels are the same for openpli-3 and 4 as far as I can see.
At the time of the working drivers the kernel was older (3.6.0).
Still, the same solution applies, you can use CEC to switch the box on when you switch the TV on too...
I know, that simplifies somewhat the switch-on procedure, but it still requires two remote controls (TV and STB) for operation.
0 members, 0 guests, 0 anonymous users
