hi,when i´m recording and try to change to another bouquet channels. the image get freezed in the bouquets list,and i have to restart .¿does anyone have the same problem?.sorry for my English.
record problem
Re: record problem #2
Re: record problem #3
Posted 3 September 2014 - 00:07
Ok.I fixed it.the problem was the drivers of the usb dvb-t (dib0700),when you are recording a terrestrial channel,you cannot change to another bouquet(get freezed).so,i've removed the dib0700 drivers,and download the drivers of usbserial(1.0-r0),and now it works perfectly.the box is Xtrend 9200 and the usb dvb-t is hauppauge wintv nova td.Thank you all.
Re: record problem #4
Re: record problem #5
Posted 3 September 2014 - 06:14
This is common. With any single tuner device you can only start multiple recording if the channels use the same transponder (valid for satellite) or use the same frequency (valid for cable and terrestrial). If you have multiple tuners in your box you should be able to start 1 recording for each tuning device. With build-in tuners this normally works perfectly, with external devices however the succesrate is determined by the drivers and the image used..
Re: record problem #6
Posted 3 September 2014 - 12:03
Hi,I have two tuners in the box,one for Astra and the other one for Hispasat,every tuner with it's own dish,I've never had this problem before in two years using the box,i know what you mean,but that is not the problem because when I'm recording an Astra channel,I cannot zap to any Hispasat channel,because get freeze in the bouquet list,it happens since a couple of months,after a software update,never before.I use openpli 4.0.thanks for you concern.
Edited by tiraito, 3 September 2014 - 12:05.
Re: record problem #7
Re: record problem #8
Re: record problem #10
Re: record problem #11
Re: record problem #12
Re: record problem #13
Re: record problem #14
Re: record problem #15
Posted 3 January 2015 - 14:37
Hello again mate.
So doublet got my system up and running using short mode, maybe there is a way?
I know TMs can record more than one channel/signal at a time and then decode it for playback so long as the recording is being played back on the same channel using the same code.... can't seem to do this with Enigma systems, maybe there will be a way around it soon?
Re: record problem #16
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users