23 replies to this topic

[baltutis]

Please let me know how make full backup? Just find how make settings backup.

Thanks

[dirocca]

autobackup or backupsuite.

both can be found in feed.

 

grtz Philip

[Pedro_Newbie]

Please let me know how make full backup? Just find how make settings backup.

Thanks

Depends on which box you are using, if it is a Dreambox or a Formuler you can't use the Autobackup or BackupSuite. All other Openpli supported boxes are supported bij Autobackup and BackupSuite

[WanWizard]

What is the problem with supporting the formuler boxes?

[baltutis]

I use Vu+ Solo2 receiver.

Autobackup make only settings backup (just tuner settings, channed channels and some minor settings). I looking for program which able make full backup (with HbbTV, Softcam and other plugins).

[Dimitrij]

What is the problem with supporting the formuler boxes?

enigma2-plugin-extensions-automatic-fullbackup - 3.3 - automatic fullbackup and manual flashing for ET/VU+/XP1000/F1/F3

In my opinion there is no problem.

 

[delsat1]

I can recommend the backupsuite to make a full backup

[Pedro_Newbie]

It was reported to me that  on the formuler f1 and f3 the backupsuite aborts with an error while dumping the kernel, it was reported to me by the importer Bomb... and 2Boom

The kernel size is somehow passed as an argument?

The used command is

$NANDDUMP /dev/$MTDPLACE -q > "$WORKDIR/$KERNELNAME"

which is equivalent to

/usr/sbin/nanddump /dev/mtd1 -q > /media/usb/kernel.bin

also the command

/usr/sbin/nanddump /dev/mtd1 -f /media/usb/kernel.bin

results in an error.

 

 

I can't solve it without testing because 2boom didn't have the box anymore and the importer didn't respond anymore.

So without a box to test it, or someone else who's willing to test it, it is impossible for me to pinpoint the problem.

 

Sad but true and therefore I decided to remove the formuler f1 and f3 parameters because the backupsuite crashed during the kernel dump phase on 2 different formulers,

 

[Pedro_Newbie]

I must say this was the case in the beginning of October, I don't know if the problem was in the preproduction models/image or not

 

The used parameters were:

Formuler F1    formuler1    Formuler F1    /formuler1    /fullbackup_formuler1        -m 2048 -e 126976 -c 8192    -m 2048 -p 128KiB    rootfs.bin    kernel.bin     noforce    message12

Formuler F3    formuler3    Formuler F3    /formuler3    /fullbackup_formuler3        -m 2048 -e 126976 -c 8192    -m 2048 -p 128KiB    rootfs.bin    kernel.bin     noforce    message12

Edited by Pedro_Newbie, 11 November 2014 - 19:27.

[WanWizard]

I've got an F1 here, anything I can do to check?

[Pedro_Newbie]

I use Vu+ Solo2 receiver.

Autobackup make only settings backup (just tuner settings, channed channels and some minor settings). I looking for program which able make full backup (with HbbTV, Softcam and other plugins).

The you can use Automatic Fullbackup (sorry Dima73 for calling it previous Autobackup) and the BackupSuite, both will do what you are looking for. The automatic fullbackup can be scheduled to run unattended and the backupsuite has to be started manually. \

[Pedro_Newbie]

You could install the backupsuite and copy the lookuptable.txt in the install dir to replace the existing one and have it a go to start with.

 

[Pedro_Newbie]

Another errormessage was:

(without suppressing the messages, so without the -q (quiet) parameter.

 

The nanddump starts but it should look something like this (but other numbers)

ECC failed: 0                                                 

ECC corrected: 0                                               

Number of bad blocks: 0                                        

Number of bbt blocks: 0                                        

Block size 131072, page size 2048, OOB size 64                 

Dumping data starting at 0x00000000 and ending at 0x00700000...

 
But the output stops after: Number of bbt blocks: 0
 

 

[Pedro_Newbie]

I've got an F1 here, anything I can do to check?

 

Did you had an opportunity to test the BackupSuite on the Formuler F1? And if so, what was the result?

[WanWizard]

Nope, not yet. Out of the country at the moment, and I can't explain what to do to the person holding the remote.

[Pedro_Newbie]

No problem at all, it can wait a bit.

[Pedro_Newbie]

Problem found, solved and committed to Github. With the next update the Formuler F1 & F3 are supported.

[hemertje]

good to hear!

[frankviana]

I'm using this plugin (download from github): enigma2-plugin-extensions-automatic-fullbackup_6.5_all.ipk and appear this error:

 

 1_0_19_1_1_1_C7A902B_0_0_0_20181023071233.jpg   148.87KB   5 downloads

 

 1_0_19_1_1_1_C7A902B_0_0_0_20181023073419.jpg   155.27KB   2 downloads

 

finish backup ok, but I don't know why show this message: socket ignored

Edited by frankviana, 23 October 2018 - 11:35.

[Dimitrij]

It's not a problem.