Did you install udpxy on your STB?
Do you get a status page when you type in your internet browser http://<ip_address_o...tb>:8088/status
Posted 14 January 2015 - 09:53
Did you install udpxy on your STB?
Do you get a status page when you type in your internet browser http://<ip_address_o...tb>:8088/status
ET10000, 4x DVB-S2, ET4000 client, Reelbox AVG 3x DVB-S2, 1x DVB-T.
Visiosat G3+ (28.2E-23.5E-19.2E-13E) 4x ALPS quad 0,2db.
Posted 15 January 2015 - 13:20
Yes I can see the status page.
Please see attachment.
I suppose that following is needed to stream MPEG TS over UDP protocol on my Xtrend device?
http://address:port/udp/mcast_addr:mport/ Relay multicast traffic from mcast_addr:mport
Do I need to use VLC player?
Posted 15 January 2015 - 16:30
Hello,
I did not use VLC, I just added the addresses in a bouquet of the channel list and it worked.
I guess your address is something as follows:
#SERVICE 1:0:1:0:0:0:0:0:0:0:http%3a//127.0.0.1%3a8088/udp/192.168.100.125%3a2222/
Note that I changed the numbers before http to the same numbers of an identical sat channel to obtain the epg of that channel.
For TF1 I have for instance:
#SERVICE 1:0:1:2206:44C:1:C00000:0:0:0:http%3a//127.0.0.1%3a8088/udp/225.1.2.131%3a1111/
One can also use dreamboxedit and use the option "IPTV and other streaming services" (right mouse click)
Edited by johan_me, 15 January 2015 - 16:32.
ET10000, 4x DVB-S2, ET4000 client, Reelbox AVG 3x DVB-S2, 1x DVB-T.
Visiosat G3+ (28.2E-23.5E-19.2E-13E) 4x ALPS quad 0,2db.
Posted 16 February 2015 - 21:17
Hi!
I was installed udpxy_1+git86+c045a1e-r0.1_mips32el.ipk & reboot my solo 2. After, I checked status of udpxy by adress http://192.168.1.35:8088/status in browser, but status page don't displayed. If I checked 192.168.1.35 in windows explorer - i look my solo2.
What should i do for starting udpxy & looking iptv on my solo 2?
.
Posted 16 February 2015 - 21:53
Hi!
I was installed udpxy_1+git86+c045a1e-r0.1_mips32el.ipk & reboot my solo 2. After, I checked status of udpxy by adress http://192.168.1.35:8088/status in browser, but status page don't displayed. If I checked 192.168.1.35 in windows explorer - i look my solo2.
What should i do for starting udpxy & looking iptv on my solo 2?
what should I do
what should Inot displayed.
I fix it by this instruction: http://www.satnigmo....ased-receivers/
Posted 6 April 2015 - 14:14
Guys, udpxy which can be downloaded from openpli server (opkg install udpxy) is useless for iptv because it does not work. I have here udpxy build 19 (can be downloaded from satnigmo blog) which works (TS stream channels opens normally) but build 23 from pli does not produce an image. This should be investigated. Status page of build 23 opens normally btw but as I said, streams do not start.
Posted 25 September 2015 - 13:50
Guys, udpxy which can be downloaded from openpli server (opkg install udpxy) is useless for iptv because it does not work. I have here udpxy build 19 (can be downloaded from satnigmo blog) which works (TS stream channels opens normally) but build 23 from pli does not produce an image. This should be investigated. Status page of build 23 opens normally btw but as I said, streams do not start.
Hi, I need udpxy build 19 for VU+ DUO2 with Openpli 4 (mips32el). I can´t search this. Can somebody help me please? I installed bulid 23, the udpxy works (I see status of udpxy) but I can´t play any multicast.
Thank you
Posted 27 September 2015 - 09:11
Guys, are you blind a bit ? You can get this file on satnigmo blog, here is direct link: http://www.satnigmo....dpxy_mipsel.rar
0 members, 0 guests, 0 anonymous users