49 replies to this topic

[ian1095]

Recently a bug has appeared in Openpli 4.0 whereby the box will not restart enigma2 nor will it reboot from the remote.All it does when you try is to give the constant spinner and this continues forever.

 

This doesn't happen all the time and there is no telling when it will occur,you can go a few days without it happening and then it can happen twice in a row.

 

This is not just my setup as Ive spoken to others who also have this bug,all are using VU+ boxes though,so I cant speak for other boxes.

 

The only solution when this happens is to telnet into the box and issue the killall enigma2 command or the reboot command.This is most annoying if at that time the PC is not switched on.

 

Please look into this.

 

As I said I know of at least 4 other people who have experienced this on VU+ boxes.

 

Ian.

Edited by ian1095, 25 April 2015 - 09:59.

[littlesat]

You you have crashlogs?????

Edited by littlesat, 25 April 2015 - 10:10.

[ian1095]

Nope

 

No crash occurs.

 

You select restart or reboot from the remote and all that happens is you get the constant spinner. It never goes until you telnet in and issue the killall enigma2 command or the reboot command.But as stated,you can go days without this happening,then out of the blue for no apparent reason the box will not restart and after you have restarted it from telnet its as though it never occurred and restarts work as they should,until the next time it decides to happen.

 

Ian.

[ian1095]

There is however a common denominator,but I was reluctant to mention this in case it was just coincidence and sent the devs looking in the wrong direction,but all the peeps who have experienced this,myself included,all use external HDD's connected via the USB port.

 

This probably has no relevance though,hence the reason I didn't want to mention it.

 

Other than that though it happens on various VU+ models including the Solo,Duo and Solo2.

 

Ian.

Edited by ian1095, 25 April 2015 - 10:28.

[littlesat]

Sounds more like a vu specific issue when you have a harddrive on the usb port ... Probably we cant't even solve it...

Edited by littlesat, 25 April 2015 - 10:48.

[ian1095]

Hmmmmmmm

 

I can go along with it being VU+ specific,but its only just started,its not been there all along,and for years of using Pli images it didn't happen,so something you have recently changed within the image has caused this to start,so that being the case,you can also fix it,if you have a mind to.

I do admit however,that it will be difficult to find the cause of this bug,but not impossible.

 

Anyway you are aware of it now,which is half the battle.

 

Ian.

Edited by ian1095, 25 April 2015 - 10:56.

[littlesat]

Somewhere begin og march a big change for vu was committed.....

[sonic1]

I have had the same issue and use internal HDD, if I use Update and reboot it happens almost every time, if I Update and ask to reboot I have not had the problem.

I think the problem started back in March for me.

[Jan Gruuthuse]

When the reboot does not happen: telnet in to your box and issue a reboot command there.

Sometimes when doing an online update from telnet prompt with:

init 4 && opkg update && opkg upgrade -force-overwrite && reboot

The 4th instruction (reboot) is not passed along.

Giving then:

reboot

the box reboots.

Perhaps something similar is going on?

[athoik]

When using a && b, b will execute only if a succeed!

/bin/false && echo false
/bin/true && echo true

[Jan Gruuthuse]

1 & 2 & 3 are executed. After 3 (upgrade) , the cursor appears back on the terminal prompt, 4 is not executed.

[athoik]

So 3 doesn't succeed (return code is not 0). echo $? Will print last return code.

Edited by athoik, 25 April 2015 - 14:15.

[Rob van der Does]

So 3 didn't (fully) succeed!

[Pr2]

Yes it failed because there is a typo error in the command should be:

 

init 4 && opkg update && opkg upgrade --force-overwrite && reboot

 

it is --force-overwrite and not -force-overwrite

 

Pr2

[Jan Gruuthuse]

Thanks for noticing my mistake. Will keep an eye on that. And report back if this issue would still play up.

[Erik Slagter]

dmesg when it occurs

[deusex]

Yes it failed because there is a typo error in the command should be:

init 4 && opkg update && opkg upgrade --force-overwrite && reboot

it is --force-overwrite and not -force-overwrite

 

Pr2

Collected errors:

 * opkg_download: Failed to download http://downloads.pli...lo2/Packages.gz, wget returned 1.

 * opkg_download: Failed to download http://downloads.pli...lo2/Packages.gz, wget returned 1.

[WanWizard]

Works fine here, I can download these files from all download mirrors. So a local connection issue.

[Jan Gruuthuse]

init 4 && opkg update && opkg upgrade --force-overwrite && reboot

Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party.
Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party-xp1000/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party-xp1000.
Downloading http://downloads.pli-images.org/feeds/openpli-4/all/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-all.
Downloading http://downloads.pli-images.org/feeds/openpli-4/mips32el-nf/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-mips32el-nf.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-xp1000.
Upgrading enigma2-plugin-extensions-mediascanner from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-extensions-mediascanner_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-networkbrowser from experimental-git3980+11021ec-r0.0 to experimental-git3980+11021ec-r0.1 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-networkbrowser_experimental-git3980+11021ec-r0.1_xp1000.ipk.
Upgrading enigma2-plugins from experimental-git3980+11021ec-r0.0 to experimental-git3980+11021ec-r0.1 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugins_experimental-git3980+11021ec-r0.1_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-mphelp from experimental-git3980+11021ec-r0.0 to experimental-git3980+11021ec-r0.1 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-mphelp_experimental-git3980+11021ec-r0.1_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-fastscan from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-fastscan_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-hotplug from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-hotplug_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-extensions-epgrefresh from experimental-git3980+11021ec-r0.0 to experimental-git3980+11021ec-r0.1 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-extensions-epgrefresh_experimental-git3980+11021ec-r0.1_xp1000.ipk.
Upgrading enigma2-plugin-extensions-ppanel from 2.0+git9+4ce6ca5-r0.3144 to 2.0+git9+4ce6ca5-r0.3170 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/all/enigma2-plugin-extensions-ppanel_2.0+git9+4ce6ca5-r0.3170_all.ipk.
Upgrading enigma2-plugin-extensions-openwebif from 1+git1272+c077005-r0.2 to 1+git1272+c077005-r0.3 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-extensions-openwebif_1+git1272+c077005-r0.3_xp1000.ipk.
Upgrading enigma2-plugin-extensions-cutlisteditor from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-extensions-cutlisteditor_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-positionersetup from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-positionersetup_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-skins-pli-hd from 0.1+git1132+5b7037a-r1.0 to 0.1+git1134+9c32b83-r1.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/all/enigma2-plugin-skins-pli-hd_0.1+git1134+9c32b83-r1.0_all.ipk.
enigma2-plugins (experimental-git3980+11021ec-r0.1) already installed on root.
Upgrading enigma2-plugin-systemplugins-videomode from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-videomode_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-softwaremanager from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-softwaremanager_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-osdpositionsetup from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-osdpositionsetup_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2 from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-hdmicec from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-hdmicec_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-skinselector from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-skinselector_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-extensions-graphmultiepg from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-extensions-graphmultiepg_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-satfinder from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-satfinder_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-systemplugins-videotune from 2.7+git12784+bf2acf8-r0.0 to 2.7+git12788+61efc03-r0.0 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-systemplugins-videotune_2.7+git12788+61efc03-r0.0_xp1000.ipk.
Upgrading enigma2-plugin-extensions-audiosync from experimental-git3980+11021ec-r0.0 to experimental-git3980+11021ec-r0.1 on root.
Downloading http://downloads.pli-images.org/feeds/openpli-4/xp1000/enigma2-plugin-extensions-audiosync_experimental-git3980+11021ec-r0.1_xp1000.ipk.
Configuring enigma2-plugin-extensions-mediascanner.
Configuring enigma2-plugins.
Configuring enigma2-plugin-systemplugins-networkbrowser.
Configuring enigma2-plugin-systemplugins-mphelp.
Configuring enigma2-plugin-systemplugins-fastscan.
Configuring enigma2-plugin-systemplugins-hotplug.
Configuring enigma2-plugin-extensions-epgrefresh.
Configuring enigma2-plugin-extensions-ppanel.
Configuring enigma2-plugin-extensions-openwebif.
Configuring enigma2-plugin-extensions-cutlisteditor.
Configuring enigma2-plugin-systemplugins-positionersetup.
Configuring enigma2-plugin-skins-pli-hd.
Configuring enigma2-plugin-systemplugins-videomode.
Configuring enigma2-plugin-systemplugins-softwaremanager.
Configuring enigma2-plugin-systemplugins-osdpositionsetup.
Configuring enigma2.
Configuring enigma2-plugin-systemplugins-hdmicec.
Configuring enigma2-plugin-systemplugins-skinselector.
Configuring enigma2-plugin-extensions-graphmultiepg.
Configuring enigma2-plugin-systemplugins-satfinder.
Configuring enigma2-plugin-systemplugins-videotune.
Configuring enigma2-plugin-extensions-audiosync.

dmesg

Linux version 3.12.1 (build@buildserver) (gcc version 4.9.1 (GCC) ) #1 Sun Feb 15 15:15:39 CET 2015
Fetching vars from bootloader... found 7 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
         sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
CPU revision is: 00029032 (Broadcom BMIPS3300)
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 232 MB LINUX region at 7 MB (0x0e843000@0x007bd000)
bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 807701e0, node_mem_map 81000000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null consoleblank=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235544K/262144K available (6108K kernel code, 289K rwdata, 1208K rodata, 188K init, 113K bss, 26600K reserved)
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 601 MHz (300.599 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 598.01 BogoMIPS (lpj=299008)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 460
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
Config internal EPHY through MDIO
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
EBI CS2: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15

Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000008000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000008000000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
usb 1-2: new high-speed USB device number 2 using ehci-brcm
UBI: scanning is finished
UBI: attached mtd2 (name "rootfs", size 122 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 972, bad PEBs: 4, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 754926168
UBI: available PEBs: 0, total reserved PEBs: 972, PEBs reserved for bad PEB handling: 16
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 41
UBIFS: background thread "ubifs_bgt0_0" started, PID 42
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 119484416 bytes (113 MiB, 941 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9FFC5C8E-F858-4C7A-8712-1C4CCCCC32C2, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 188K (80771000 - 807a0000)
usb 1-1: new high-speed USB device number 3 using ehci-brcm
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 1-1:1.0
scsi 0:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 120999936 512-byte logical blocks: (61.9 GB/57.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
usbcore: registered new interface driver tpm
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
i2c-core: driver [ch455] using legacy suspend method
i2c-core: driver [ch455] using legacy resume method
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
eth0 Link DOWN.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0 Link UP.
Auto config phy
eth0: Link is up, 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ian1095]

My dmesg when the constant spinner occurs after taking this message I had to issue killall enigma2 to get the box to restart.

[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94e6c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94e6c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94f8c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94e3c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94e3c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94fbc
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94f2c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94f8c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94efc
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94ddc
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94ecc
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94ecc
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94e6c
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6498576
[AUD]: AUDIO_PLAY 6498576 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6498576  0
[VID]: VIDEO_PLAY 6498576  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6498576  1
[AUD]: AUDIO_CONTINUE 6498576 1 aph=0xc0b94ddc
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[LCD]:bm730_dbox_lcd_write_data

[LCD]:vfd reply success

[LCD]:bm730_dbox_lcd_write_read_data len: 8

[LCD]:rtc data received 4

[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6498576
[AUD]: AUDIO_CONTINUE 6498576 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0

Ian
 

Edited by ian1095, 28 April 2015 - 08:26.