12 replies to this topic

[Satpal]

For some days now I get a spinner that can only be removed by a reboot. This mostly happens while using mediaportal, but also while streaming a movie from another box or yesterday by just switching channels. Finally I was able to at least get some log of it:

 

 

Jul  8 02:49:57 et10000 user.alert kernel: CPU 1 Unable to handle kernel paging request at virtual address 0000003c, epc == 804f3234, ra == e0b55180
Jul  8 02:49:57 et10000 user.warn kernel: Oops[#1]:
Jul  8 02:49:57 et10000 user.warn kernel: CPU: 1 PID: 199 Comm: aaaaaaaaaaaaaaa Tainted: GF          O   3.17.3 #1
Jul  8 02:49:57 et10000 user.warn kernel: task: cfcad548 ti: cf6be000 task.ti: cf6be000
Jul  8 02:49:57 et10000 user.warn kernel: $ 0   : 00000000 10008b00 00000000 00000000
Jul  8 02:49:57 et10000 user.warn kernel: $ 4   : 8fffd3b4 000000cb 00000000 00000000
Jul  8 02:49:57 et10000 user.warn kernel: $ 8   : 00000001 e13675a0 00000010 00000000
Jul  8 02:49:57 et10000 user.warn kernel: $12   : 67afeb88 77bc1870 00000000 00000001
Jul  8 02:49:57 et10000 user.warn kernel: $16   : cf1ec600 ce5fd900 000000cb 000000cc
Jul  8 02:49:57 et10000 user.warn kernel: $20   : e0bc0000 00000004 e0bc0000 e0b90000
Jul  8 02:49:57 et10000 user.warn kernel: $24   : 00000000 8005b350                  
Jul  8 02:49:57 et10000 user.warn kernel: $28   : cf6be000 cf6bfd78 e0b90000 e0b55180
Jul  8 02:49:57 et10000 user.warn kernel: Hi    : 00000bd8
Jul  8 02:49:57 et10000 user.warn kernel: Lo    : 17321680
Jul  8 02:49:57 et10000 user.warn kernel: epc   : 804f3234 dvb_dmxdev_section_callback+0x24/0x1b0
Jul  8 02:49:57 et10000 user.warn kernel:     Tainted: GF          O  
Jul  8 02:49:57 et10000 user.warn kernel: ra    : e0b55180 __228c55+0x13c/0x1bc [dvb]
Jul  8 02:49:57 et10000 user.warn kernel: Status: 10008b03    KERNEL EXL IE
Jul  8 02:49:57 et10000 user.warn kernel: Cause : 00800008
Jul  8 02:49:57 et10000 user.warn kernel: BadVA : 0000003c
Jul  8 02:49:57 et10000 user.warn kernel: PrId  : 00025a11 (Broadcom BMIPS5000)
Jul  8 02:49:57 et10000 user.warn kernel: Modules linked in: ipv6 dvb(OF) modloader2(O) modloader(O) tpm(O)
Jul  8 02:49:57 et10000 user.warn kernel: Process aaaaaaaaaaaaaaa (pid: 199, threadinfo=cf6be000, task=cfcad548, tls=00000000)
Jul  8 02:49:57 et10000 user.warn kernel: Stack : cf1ec600 e0bc4f38 cf1ec600 e0bc4ff4 0000029e cf1ec600 ce5fd900 000000cb
Jul  8 02:49:57 et10000 user.warn kernel:       000000cc e0bc0000 00000004 e0b55180 8004a9e4 00100100 cf1ec504 8005b160
Jul  8 02:49:57 et10000 user.warn kernel:       00000000 00000000 000000cc 8fffd3b4 cec64804 cf1ec600 e1360000 000001f9
Jul  8 02:49:57 et10000 user.warn kernel:       e0b98c60 e0b98c9c e0b9becc e0ba0000 e0b90000 e0b9af40 260601bc 00000000
Jul  8 02:49:57 et10000 user.warn kernel:       0040f809 24054000 cf6bfe34 8089d480 00c22239 fffb8fe2 80819c80 e0b55044
Jul  8 02:49:57 et10000 user.warn kernel:       ...
Jul  8 02:49:57 et10000 user.warn kernel: Call Trace:
Jul  8 02:49:57 et10000 user.warn kernel: [<804f3234>] dvb_dmxdev_section_callback+0x24/0x1b0
Jul  8 02:49:57 et10000 user.warn kernel: [<e0b55180>] __228c55+0x13c/0x1bc [dvb]
Jul  8 02:49:57 et10000 user.warn kernel: [<e0b9af40>] __58330d+0x844/0x8cc [dvb]
Jul  8 02:49:57 et10000 user.warn kernel: [<e0b9affc>] __08b4c8+0x34/0x54 [dvb]
Jul  8 02:49:57 et10000 user.warn kernel: [<e0b9be80>] __b9aca0+0x40/0x8c [dvb]
Jul  8 02:49:57 et10000 user.warn kernel: [<80040168>] kthread+0x10c/0x124
Jul  8 02:49:57 et10000 user.warn kernel: [<80006fe8>] ret_from_kernel_thread+0x14/0x1c
Jul  8 02:49:57 et10000 user.warn kernel: Code: afb2001c  afb10018  afb00014 <8c50003c> 8e020064  1440001b  00809021  8e040050  00a08821
Jul  8 02:49:57 et10000 user.warn kernel: ---[ end trace 7ae9b652176422bb ]---

[Erik Slagter]

This is either a driver bug or failing hardware. Can it be it becomes too hot?

[Satpal]

Thanks for your reply. I guess you are right with your suspicion. With 4 tuners and an internal HDD I already feared that heat might become an issue although I didn't expect it to happen so soon and in this way. I moved some stuff around and found a better place for it.

Edited by Satpal, 9 July 2015 - 16:11.

[Satpal]

As the situation didn't improve after I had moved the box I finally switched the first ET10000 with another one and I get the same error message. I guess this should eliminate heat and failing hardware as culprits.

[Erik Slagter]

Yep. Then it's a driver bug.

[betacentauri]

But still your setup seems to be special because nobody else have these problems.

[cellie]

Not sure if it applies to this situation, but my et8000 was having strange problems as well. 

The nic was down, up, down, up, down........

After changing the network cable the problem was gone for a while, but then the nic went down, up, down.... etc.

So then I suspected excessive heat as the culprit.

 

I don't use a hdd in the box, and had when I installed it disconnected the cable from the board.

Yesterday I hooked up the cable again, but after a while the problem was back.

 

What finally solved it was removing the fan from the original position -under the hdd mount plate- and fixing it with a screw on the cooler block on the SoC.

The temp -as seen in menu>info>about- went from 70 to 50 degrees and I don't see any problems anymore.

 

Does your et10000 run ok for a while -when cool- before it shows the problems?

Might as well try a fan on the SoC to see if it helps....

 

A driver update might have had an impact on the SoC temperature, because my box ran ok for over a year with the same setup.

 

Just my 2 cents...

[Satpal]

But still your setup seems to be special because nobody else have these problems.

I don't believe that it really is that special, 4x sat tuner + internal hdd seems quite normal to me. But I'm also astonished that nobody else is reporting anything like it.

 

Not sure if it applies to this situation, but my et8000 was having strange problems as well. 

The nic was down, up, down, up, down........

After changing the network cable the problem was gone for a while, but then the nic went down, up, down.... etc.

So then I suspected excessive heat as the culprit.

 

Does your et10000 run ok for a while -when cool- before it shows the problems?

Might as well try a fan on the SoC to see if it helps....

The heat especially on the sat box is still an issue. I have installed the ET-fancontrol plugin which gives me those stand-by temperatures:

 

First ET10000  (2x cable tuner, internal hdd): system temperature 39, cpu temperature 64

Second ET10000 (4x sat tuner, internal hdd): system temperature 48, cpu temperature 78

 

While in use the cpu temperature usually is now around 88-92 (after watching for a few hours with PiP), the highest I ever saw was 98. But I never really could feel a connection between the temperature level and the box freezing. Just by watching and recording I can't get the box to freeze anymore which only happened once if it really occured that way. But if a video stream fails to start in the mediaportal plugin I can be pretty sure that I can quit the stream I tried to play via the drop-box and after the spinner appears it's all over. I can still get telnet access but init 4 won't work, only init 6.

 

The first ET10000 also showed this problem with the nic that kept restarting every few minutes. But there have been problems way worse with the V-Lan/Lan ports on both boxes. Either one disappeares completely or is activated without my doing after a reboot. Sometimes the router shows both macs connected simultaneously with two IP's, although only one should be present and only one cable is connected. But for now I have learned to live with that.

 

The second one doesn't show the behaviour with the restarting nic at all. On the other hand the log is full of this streamproxy warning which never appeared on the other one:

 

Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config file change detected, restarting
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking manufacturer/model: VU+/Solo2
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking id: /proc/stb/info/model = dm8000
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking manufacturer/model: VU+/Duo2
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking id: /proc/stb/info/model = dm8000
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking manufacturer/model: XTrend/ET1000
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking id: /proc/stb/info/model = dm800se
Jul 27 15:44:14 et10000 user.warn streamproxy: Checking id: /proc/stb/info/boxtype = et10000
Jul 27 15:44:14 et10000 user.warn streamproxy: model identified as: XTrend ET1000 (bcm7424)
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: auth = true/1
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: bframes = 0/0
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: bitrate = 2000/2000
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: foreground = false/0
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: group = /2144111932
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: level = 3.1/3
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: listen:8002 = 1/1
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: listen:8003 = 1/1
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: profile = baseline/0
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: size = 720p/720
Jul 27 15:44:14 et10000 user.warn streamproxy: streamproxy: config_map: webifport = 80/80

 

And no, the config file hasn't been touched by me.
 

[WanWizard]

My primary box is an ET10000, 4 sat tuners, internal disk, and constantly in use for viewing, recording and streaming (don't have coax in the house, I use the fallback tuner).

 

It was one of the first series shipped, and I never have an issue with temperature or freezing.

[Satpal]

Ok, so yesterday I got the same error message on a VU+ Solo2. As I don't believe that the hardware on 3 boxes is failing at the same time and now apart from the 2 ET10000's another brand is concerned I can't really believe that it's a driver bug either. What I can't fathom is why nobody else is having any trouble. Mediaportal seems to be more popular with other images but from what I read here and on other boards there are also a lot of users around that use it on Openpli.

[betacentauri]

You get a similar error message like in post 1? Or the streamproxy warnings?

[Satpal]

Aug  2 02:43:37 vusolo2 user.alert kernel: CPU 0 Unable to handle kernel paging request at virtual address 1888ed62, epc == e0db83ac, ra == e0e51870
Aug  2 02:43:37 vusolo2 user.warn kernel: Oops[#1]:
Aug  2 02:43:37 vusolo2 user.warn kernel: Cpu 0
Aug  2 02:43:37 vusolo2 user.warn kernel: $ 0   : 00000000 10108700 e1870000 00000001
Aug  2 02:43:37 vusolo2 user.warn kernel: $ 4   : ce4c7e00 ae70b400 00000394 00000001
Aug  2 02:43:37 vusolo2 user.warn kernel: $ 8   : 00000001 00000000 00000000 00000000
Aug  2 02:43:37 vusolo2 user.warn kernel: $12   : 00000001 00000000 ffffffff b890aa2a
Aug  2 02:43:37 vusolo2 user.warn kernel: $16   : ae70b400 e18f0000 ce1beb00 1888dc5e
Aug  2 02:43:37 vusolo2 user.warn kernel: $20   : ae90dd24 cf155e20 e0e778b4 e0e52ca4
Aug  2 02:43:37 vusolo2 user.warn kernel: $24   : 00000000 8004bed0                  
Aug  2 02:43:37 vusolo2 user.warn kernel: $28   : cf154000 cf155dc0 e0e526d0 e0e51870
Aug  2 02:43:37 vusolo2 user.warn kernel: Hi    : 00080000
Aug  2 02:43:37 vusolo2 user.warn kernel: Lo    : 0004cd80
Aug  2 02:43:37 vusolo2 user.warn kernel: epc   : e0db83ac 0xe0db83ac
Aug  2 02:43:37 vusolo2 user.warn kernel:     Tainted: P           O
Aug  2 02:43:37 vusolo2 user.warn kernel: ra    : e0e51870 0xe0e51870
Aug  2 02:43:37 vusolo2 user.warn kernel: Status: 10108703    KERNEL EXL IE
Aug  2 02:43:37 vusolo2 user.warn kernel: Cause : 00800008
Aug  2 02:43:37 vusolo2 user.warn kernel: BadVA : 1888ed62
Aug  2 02:43:37 vusolo2 user.warn kernel: PrId  : 00025a11 (Brcm4380)
Aug  2 02:43:37 vusolo2 user.warn kernel: Modules linked in: ipv6 fpga_directc(PO) brcmfb(O) dvb_bcm7356(PO) procmk(O)
Aug  2 02:43:37 vusolo2 user.warn kernel: Process nx_sched_high_a (pid: 259, threadinfo=cf154000, task=cf19b1f8, tls=00000000)
Aug  2 02:43:37 vusolo2 user.warn kernel: Stack : cb65fa88 00000000 00000000 e0e4f540 ce325d00 8004bee4 cb65fb00 e0e76c6c
Aug  2 02:43:37 vusolo2 user.warn kernel:         83dac580 e18f0000 ce1beb00 e0e4f4f0 e0e4f48c e0e51870 00000000 10108700
Aug  2 02:43:37 vusolo2 user.warn kernel:         00000000 e1820000 cf155e3c ffffffff cf155ea8 00000000 0009a200 2b45e180
Aug  2 02:43:37 vusolo2 user.warn kernel:         0009a224 189de140 cb65fb80 cce8aa00 cb65fb80 00100000 cf155ea8 00000001
Aug  2 02:43:37 vusolo2 user.warn kernel:         00000000 00000000 e0db8378 ae90dd24 ae70b400 00000002 00000002 00000000
Aug  2 02:43:37 vusolo2 user.warn kernel:         ...
 

[Satpal]

I was finally able to get a enigma2 log:

 

<227303.832627> [eServiceMP3] Buffering 97 percent done
<227303.856854> [eServiceMP3] Buffering 98 percent done
<227303.858652> [eServiceMP3] Buffering 100 percent done
4605
action ->  WizardActions ok
unknown action WizardActions/ok! typo in keymap?
action: okButton
action ->  InfobarSeekActions okButton
action ->  InfobarShowHideActions toggleShow
action ->  WizardActions back
[SKIN] Parsing embedded skin <embedded-in-'ChoiceBoxExt'>
warning, skin is missing element bgdown in <class 'Plugins.Extensions.MediaPorta
l.resources.choiceboxext.ChoiceBoxExt'>
warning, skin is missing element title in <class 'Plugins.Extensions.MediaPortal
.resources.choiceboxext.ChoiceBoxExt'>
warning, skin is missing element bgup in <class 'Plugins.Extensions.MediaPortal.
resources.choiceboxext.ChoiceBoxExt'>
action ->  WizardActions ok
playing 1:0:19:283D:3FB:1:C00000:0:0:0:
<227316.808190> [eServiceMP3] stop http://cdn7.public.t...n.com/201308/06
/14170711/480P_224K_14170711.mp4?st=OF84JlRETGIkv-0zHWruuw&e=1438560214&ri=1013&
rs=150
<227316.890862> [eServiceMP3] destruct!
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
<227316.913832> [eDVBServicePlay] timeshift
not pauseable.
<227316.915380> [eDVBServicePlay] timeshift
not pauseable.
<227316.917581> [eDVBServicePlay] timeshift
not pauseable.
<227316.919552> [eDVBServicePlay] timeshift
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
<227316.922532> [eDVBResourceManager] allocate channel.. 03fb:0001
<227316.922729> [eDVBFrontend] opening frontend 2
<227316.925985> [eDVBFrontend] (2)tune
<227316.926273> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd
ffffffff
<227316.926441> [eDVBFrontend] prepare_sat System 1 Freq 11494000 Pol 0 SR 22000
000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
<227316.926540> [eDVBFrontend] tuning to 1744 mhz
<227316.926628> [eDVBChannel] OURSTATE: tuning
<227316.926720> [eDVBServicePMTHandler] allocate Channel: res 0
<227316.926883> [eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
<227316.926996> [eDVBChannel] getDemux cap=00
<227316.927148> [eDVBResourceManager] allocate demux cap=00
<227316.927230> [eDVBResourceManager] allocating demux adapter=0, demux=0, sourc
e=2 fesource=2
<227316.927373> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<227320.812239> [gRC] main thread is non-idle! display spinner!