Posted 16 July 2015 - 13:06
Hello,
Before I was able to watch something on my TV and watch same channel (in other room) on PC. Meanwhile If i put receiver to standby - the stream to PC continues without problems.
Now If I do the same scenario and put receiver in standby - the stream to pc stops.
I have to go to the webif and select the channel I want to watch.
Whan happend/changed?
Posted 16 July 2015 - 14:16
What type/model of receiver are we talking about?
Did you do a flash and forgot to install a driver (VU-SOLO etc?)
ET10K user i.c.w. Samsung UE40B6000 LED HDTV. ET9K alas not functioning anymore.
Posted 16 July 2015 - 18:42
xtrend et6000
if i forget driver how i am going to watch tv at all?
Posted 17 July 2015 - 11:41
Driver issue was only for VU-solo/VU-uno, etc. Not for Xtrend!
ET10K user i.c.w. Samsung UE40B6000 LED HDTV. ET9K alas not functioning anymore.
Posted 17 July 2015 - 17:37
Hello,
Before I was able to watch something on my TV and watch same channel (in other room) on PC. Meanwhile If i put receiver to standby - the stream to PC continues without problems.
Now If I do the same scenario and put receiver in standby - the stream to pc stops.
I have to go to the webif and select the channel I want to watch.
Whan happend/changed?
Strim for PC,how (detail)?
GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K
Posted 23 August 2015 - 06:14
bump.
So - Its not possible anymore to request stream from receiver while its on standby?
We have to turn on receiver, selected required channel and run stream.
Posted 23 August 2015 - 07:27
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 24 August 2015 - 11:29
Hi,
Check that the option Zap before stream is selected in OpenWebif and if I remember well you can install a Plugin to handle the driver capabilities on Xtrend.
Perhaps that your tuner is configured to no longer power the LNB while in standby.
Pr2
Edited by Pr2, 24 August 2015 - 11:31.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 24 August 2015 - 12:33
And of course you should not use DEEP standby.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 31 August 2015 - 17:33
Here no issue at all.......
Let me explain how it was before.
If I put receiver on standby and from WebIf I download the whole bouquet as m3u playlist file. (services.m3u) I can put that file in VLC (for example) and change channels from there and watch tv on my PC.
STB remains in standby mode and red light is blinking.
Currently this is not possible.
Posted 31 August 2015 - 17:45
Hi,
Check that the option Zap before stream is selected in OpenWebif and if I remember well you can install a Plugin to handle the driver capabilities on Xtrend.
Perhaps that your tuner is configured to no longer power the LNB while in standby.
Pr2
I tried that but this option does not have effect on m3u playlist files when I am not in the webif.
I never installed the plugin you mention, but I am interested to install it if somebody tell me the name. But still, I never need it before.
My openpli installation is since february and I only updated it through the menu.
If the LNB powers down during standby this happend in some update after february 15.
Posted 31 August 2015 - 17:46
And of course you should not use DEEP standby.
Yes. I never use DEEP standby.
Posted 31 August 2015 - 19:33
Again... here no issue at all.... and I stream regurally when the box is in standby.....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 31 August 2015 - 20:23
Ok. I will try to reflash my stb then. Maybe something messed up during updates.
Posted 31 August 2015 - 23:19
Reflash fixed the problem!
Thanks for your help.
0 members, 0 guests, 0 anonymous users
