9 replies to this topic

[nemosince1996]

I use Avermedia A835B(2835) roughly a half year. After installation everything was fine, usb stick was registered and running well.

 

I used it after several month again (it is only backup source) and I observe distorted sound. The same result is on both Solo2, which I have,

 

but if I use it on Win7 or Win10, sound is ok. It seems to me that it is related to latest kernel change when probably some libraries have been changed.

 

Could somebody help me to find the reason and possibly to fix it? Thanx in advance.

 

 

root@Solo2_1:~# opkg install enigma2-plugin-drivers-dvb-usb-it913x
Package enigma2-plugin-drivers-dvb-usb-it913x (1.0-r0.11) installed in root is up to date.
root@Solo2_1:~# opkg install firmware-dvb-usb-it913x
Package firmware-dvb-usb-it913x (1.0-r0.16) installed in root is up to date.
root@Solo2_1:~# opkg install kernel-module-dvb-usb-it913x
Package kernel-module-dvb-usb-it913x (3.13.5-r2.2.4.1) installed in root is up to date.
root@Solo2_1:~# opkg install kernel-module-dvb-usb-v2
Package kernel-module-dvb-usb-v2 (3.13.5-r2.2.4.1) installed in root is up to date.
root@Solo2_1:~# opkg install kernel-module-it913x-fe
Package kernel-module-it913x-fe (3.13.5-r2.2.4.1) installed in root is up to date.
root@Solo2_1:~#

 

 

root@Solo2_1:~# dmesg | grep -i usb
usb 1-1: dvb_usb_v2: found a 'Avermedia A835B(2835)' in cold state
usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
it913x: Firmware Version 52887808<6>usb 1-1: dvb_usb_v2: found a 'Avermedia A835B(2835)' in warm state
usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
usb 1-1: DVB: registering adapter 1 frontend 0 (Avermedia A835B(2835)_1)...
usb 1-1: dvb_usb_v2: 'Avermedia A835B(2835)' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_it913x
root@Solo2_1:~#

 

 

root@Solo2_1:~# dmesg
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
    blocks,   bytes, filename:line
      1024,  176128, portinginterface/hsm/src/common/bhsm.c:500
       691,  158468, BSEAV/lib/utils/balloc.c:31
       385,   24640, magnum/commonutils/mrc/src/bmrc_monitor.c:666
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:0
[CI]: registered ci0
[CI]: CI interface initialised
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4
[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
it913x: Chip Version=02 Chip Type=9135
it913x: Dual mode=0 Tuner Type=38it913x: Unknown tuner ID applying default 0x60
usb 1-1: dvb_usb_v2: found a 'Avermedia A835B(2835)' in cold state
usb 1-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=02 Chip Type=9135
it913x: Firmware Version 52887808<6>usb 1-1: dvb_usb_v2: found a 'Avermedia A835B(2835)' in warm state
usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Avermedia A835B(2835))
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
it913x-fe: Tuner LNA type :60
usb 1-1: DVB: registering adapter 1 frontend 0 (Avermedia A835B(2835)_1)...
usb 1-1: dvb_usb_v2: 'Avermedia A835B(2835)' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_it913x
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
__clk_enable: network [1]
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
NET: Registered protocol family 10
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
[LCD]: unknown cmd 0x1015
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -861864464
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -861864464
[AUD]: AUDIO_SET_MIXER : amixl 38, amixr 38
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -2784, right volume -2784
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca0ef080
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[SC]: !!!unknown cmd 0x5407
[SC]: !!!unknown cmd 0x5407
[DMX]: paserband_remove_pid pid 0x201 not found
[DMX]: paserband_remove_pid pid 0x211 not found
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6536448
[AUD]: AUDIO_CONTINUE 6536448 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca19dd80
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 0 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6536448
[AUD]: AUDIO_CONTINUE 6536448 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 1
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_SET_BYPASS_MODE 48
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PLAY 48 decoder start : 0
[AUD]: AUDIO_PLAY : Starting Playpump
[AUD]: AUDIO_CONTINUE 1 1 aph=0x0
[AUD]: AUDIO_PAUSE 6
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SELECT_SOURCE 1
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_SET_BYPASS_MODE 10
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PLAY 10 decoder start : 0
[AUD]: AUDIO_PLAY : Starting Playpump
[AUD]: AUDIO_CONTINUE 1 1 aph=0x0
[AUD]: AUDIO_PAUSE 5
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SELECT_SOURCE 1
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_SET_BYPASS_MODE 10
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PLAY 10 decoder start : 0
[AUD]: AUDIO_PLAY : Starting Playpump
[AUD]: AUDIO_CONTINUE 1 1 aph=0x0
[AUD]: AUDIO_PAUSE 5
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SELECT_SOURCE 1
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_SET_BYPASS_MODE 10
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PLAY 10 decoder start : 0
[AUD]: AUDIO_PLAY : Starting Playpump
[AUD]: AUDIO_CONTINUE 1 1 aph=0x0
[AUD]: AUDIO_PAUSE 5
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SELECT_SOURCE 1
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_SET_BYPASS_MODE 10
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PLAY 10 decoder start : 0
[AUD]: AUDIO_PLAY : Starting Playpump
[AUD]: AUDIO_CONTINUE 1 1 aph=0x0
EXT4-fs (sda1): error count: 70
EXT4-fs (sda1): initial error at 1426613050: ext4_mb_free_metadata:4554: block 18804160
EXT4-fs (sda1): last error at 1442276734: ext4_mb_generate_buddy:756
[AUD]: AUDIO_PAUSE 7
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_SELECT_SOURCE 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xc44c2180
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6536448
[AUD]: AUDIO_CONTINUE 6536448 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
bcm7356: hotplug_callback():
Hotplug - status.connected 0:1:0
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0:2
FE tune
EXT4-fs error (device sda1): ext4_mb_generate_buddy:756: group 8, 1159 clusters in bitmap, 1160 in gd; block bitmap cor
rupt.
[SC]: !!!unknown cmd 0x5407
[SC]: !!!unknown cmd 0x5407
[AUD]: AUDIO_SET_MUTE 0
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xccbfd700
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
bcm7356: hotplug_callback():
Hotplug - status.connected 0:1:0
bcm7356: hotplug_callback():
Hotplug - Disconnecting HDMI from display
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0:2
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
!!!pes_cb idx<0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6536448
[AUD]: AUDIO_CONTINUE 6536448 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xcc8ecb80
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xcc8ecb80
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6536448
[AUD]: AUDIO_CONTINUE 6536448 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca070a00
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca070a00
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 6536448
[AUD]: AUDIO_CONTINUE 6536448 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca070100
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
root@Solo2_1:~#

 

[nemosince1996]

Today I found new "bigger" system update with usb drivers. Unfortunately this has not helped to fix my problem. Sound is still distorted and shaky. As you see in dmesg listing

 

I used usb hub to avoid the problem caused by powerring dvb-t dongle.

 

I will wait patiently if I'm with someone to help.

 

 

root@Solo2_1:~# dmesg
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD7500BPVX-55JC3T3, 01.01A01, max UDMA/133
ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
scsi 1:0:0:0: Direct-Access     ATA      WDC WD7500BPVX-5 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
usb 2-1: new high-speed USB device number 2 using ehci-brcm
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
 sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright© Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000004bc0000
nand_read_bbt: bad block at 0x000004e80000
nand_read_bbt: bad block at 0x0000060a0000
nand_read_bbt: bad block at 0x00000d000000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
random: nonblocking pool is initialized
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1792, bad PEBs: 8, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 659/225, WL threshold: 4096, image sequence number: 400955199
UBI: available PEBs: 0, total reserved PEBs: 1792, PEBs reserved for bad PEB handling: 32
UBI: background thread "ubi_bgt0d" started, PID 52
ALSA device list:
  No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 55
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID A22A2E8E-022A-43CA-9266-2F4EBA764A18, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 208K (8073c000 - 80770000)
EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
procmk_init
dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (_vuplus_solo2_)
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0:0
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[GP]:brcm_pwm_init
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1:2
brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[MPVR]: >> misc_pvr_init
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
    blocks,   bytes, filename:line
      1024,  176128, portinginterface/hsm/src/common/bhsm.c:500
       691,  158468, BSEAV/lib/utils/balloc.c:31
       384,   24576, magnum/commonutils/mrc/src/bmrc_monitor.c:666
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:0
[CI]: registered ci0
[CI]: CI interface initialised
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4
[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
it913x: Chip Version=02 Chip Type=9135
it913x: Dual mode=0 Tuner Type=38it913x: Unknown tuner ID applying default 0x60
usb 2-1: dvb_usb_v2: found a 'Avermedia A835B(2835)' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=02 Chip Type=9135
it913x: Firmware Version 52887808<6>usb 2-1: dvb_usb_v2: found a 'Avermedia A835B(2835)' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Avermedia A835B(2835))
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
it913x-fe: Tuner LNA type :60
usb 2-1: DVB: registering adapter 1 frontend 0 (Avermedia A835B(2835)_1)...
usb 2-1: dvb_usb_v2: 'Avermedia A835B(2835)' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_it913x
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
__clk_enable: network [1]
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
NET: Registered protocol family 10
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
[LCD]: unknown cmd 0x1015
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -853680656
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -853680656
[AUD]: AUDIO_SET_MIXER : amixl 29, amixr 29
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -2141, right volume -2141
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 6536448
[AUD]: AUDIO_PLAY 6536448 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 6536448  0
[VID]: VIDEO_PLAY 6536448  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca92b780
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 6536448  1
[AUD]: AUDIO_CONTINUE 6536448 1 aph=0xca92b780
[AUD]: Mute : 0
[SC]: !!!unknown cmd 0x5407
[SC]: !!!unknown cmd 0x5407
root@Solo2_1:~# exit

[nemosince1996]

Maybe I made a fault because I sent log when I did not switch Tv station using Avermedia. I append new log with dvb-t running it.

 

 

 dmesg.log   11.66KB   3 downloads

[dmarion]

I had the same issue. Looks like problem is with latest VU+ drivers.

Same happens with SIANO cards and SAT>IP tuners.

Also I noticed same problem at SoloSE.

 

I fixed problem by downgrading to previous release simply by replacing 

 

/lib/modules/3.13.5/extra/dvb-bcm7356.ko

 

with same file from vuplus-dvb-modules-vusolo2-3.13.5-20150511.tar.gz.

 

Which can be found at:

http://archive.vuplu...wnload/drivers/

[nemosince1996]

If you know what to do it is very simple.    I knew that somebody definitely will find a solution. It works, thank you very much.

[petricek]

Hi.

I have SOLO2 with VTI 9.01 and IT9135 stick (048d:9005 Integrated Technology Express, Inc.) and I have problem with distorted sound too.

I test your solution without succes. Please can you write me a way how to install file dvb-bcm7356.ko from downloaded archive to my box? I try simple copy it to box but files have a very diferent size 130660 in box vs 9 441 321 in archive.

Thank you for your answer.

Peter

Edited by petricek, 24 November 2015 - 19:14.

[nemosince1996]

Yes, history is repeated because after new drivers update from the 17th of November nothing has changed, sound was distorted again. So that I again applied method decribed by dmarion (thank you once more).

[stick50jr]

Yes, history is repeated because after new drivers update from the 17th of November nothing has changed, sound was distorted again. So that I again applied method decribed by dmarion (thank you once more).

Driver update on 1st December 2015 has fixed this problem for me (Duo2 and OpenVix 3.2.027 [OpenPLi based])

[Erik Slagter]

That probaly means SAT>IP will work again as well.

[DrData]

Here the same.

On my DUO2 I had to use old drivers, otherwise sound was stuttering on DVB-T.

And as a really goody I noticed that the YAMP-Musicplayer works again as expected.

 

In the past the YAMP-Musicplayer stops music playing for some milliseconds if press OK button on the remote control.

This Bug was in for years.

With todays Update it works and Bug is fixed!

 

Great Driver Update !