42 replies to this topic

[MastaG]

Here's another batch of images.

 

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
  Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
  Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
  because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
  These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
  added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.

- DM800 kernel will now always pass the vermagic check when loading modules.

  Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

 

 

Dreambox DM500HD:
https://mega.nz/#!m0...3iejsCLZdFH7Roo
Dreambox DM500HD V2:
https://mega.nz/#!21...-k6MSYZi_q5nmdY
Dreambox DM7020HD:
https://mega.nz/#!Xt...7SuMxUbAsYxifT4
Dreambox DM800:
https://mega.nz/#!ft...Ic9mDPNWrqxsTcs
Dreambox DM8000:
https://mega.nz/#!bg...HwDvemUE5nsA4QE
Dreambox DM800Se:
https://mega.nz/#!Wx...fHQu-nU42uvssmk
Dreambox DM800Se V2:
https://mega.nz/#!q8...MWo1t3CIeN8JetQ

Xtrend ET10000:
https://mega.nz/#!7h...gyX_ZALv5GCBqbA
Xtrend ET9x00:
https://mega.nz/#!Tt...HqzDjBkPImdM7jM
Xtrend ET8500:
https://mega.nz/#!ax...WEJCAwVjr5BKMuU
Xtrend ET8000:
https://mega.nz/#!G9...M3AZwxVHprujR7E
Xtrend ET7x00:
https://mega.nz/#!2l...HMEUHpVFMy0F5H8
Xtrend ET6x00:
https://mega.nz/#!a8...V8oUOtz4J6x1uk8
Xtrend ET5x00:
https://mega.nz/#!jp...wOm5pHJAcN4OGzM
Xtrend ET4x00:
https://mega.nz/#!To...A2nNzZ9SPeKkfKo

Formuler F3:
https://mega.nz/#!j1...YSj-AuJnLcprcYs
Formuler F1:
https://mega.nz/#!3s...zW-7edtqbpKoDsM

Mut@nt HD2400:
https://mega.nz/#!Ph...jMXwA_Dk0NhqARM
Mut@nt HD1200:
https://mega.nz/#!D4...rn-81ZZF4huO-JM
Mut@nt HD1100:
https://mega.nz/#!mt...k0IgStTNwjrdnvo
Mut@nt HD500C:
https://mega.nz/#!Dx...K-zIB4Ja-_l_-BM

MaxDigital XP1000:
https://mega.nz/#!Kx...q3SdfvOnefjbilg

XSarius Fusion HD:
https://mega.nz/#!W5...nMPyXFt5NKM_pXY
XSarius Fusion HD Se:
https://mega.nz/#!r9...GSVN9scWgfy7q0I

Vu+ Solo:
https://mega.nz/#!e4...ad_AM1PBFSOuxnY
Vu+ Solo 2:
https://mega.nz/#!mw...7GoHMr7Jar73bJE
Vu+ Solo Se:
https://mega.nz/#!u1...VFUveYa3gGPeDvI
Vu+ Duo:
https://mega.nz/#!zt...IWD7AOJM9ksNL9g
Vu+ Duo 2:
https://mega.nz/#!21...5YBmbR5XxujuWC0
Vu+ Ultimo:
https://mega.nz/#!Tk...Ahuu1NZwJiYsa60
Vu+ Uno:
https://mega.nz/#!3k...2xRCSlv71iBwyyA
Vu+ Zero:
https://mega.nz/#!Ol...yKjdYaQvjRgmino

 

For a full list of receivers: https://mega.nz/#!Kk...fFpw02R-Xkc6MSo

 

Please respect the forum and don't mention any OEM or unsupported receivers.

Instead PM me if you have a problem with any of them.

 

 

Known issues:

 

- https://bugzilla.gno...g.cgi?id=758928

  Basically playing static mp4 files from internet urls (eg http or https) will most probably fail.

  The dev said he was looking into it.

- DM800 first boot will take a while, please be patient. The next boot will be faster.

- On spark/spark7162 you need to set 'boxtype  =  dreambox' for oscam dvbapi.

  We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.

 

 

Please report your findings, even when everything works it would be nice to know it works :-)

If something doesn't work, then please attach an url or a sample of the media you're trying to play.

 

Happy testing!

Edited by MastaG, 10 December 2015 - 08:39.

[cenko]

Thank you very much. Great work.

After I install this to solo2, do you recommend to update online regularly or leave it as it is?

 

Thanks.

[MastaG]

cenko,

 

yes, I won't be uploading new images since I have a pretty solid base now.

I'll update the feed once we have a fix or workaround for the bug that prevents mp4 files from playing properly from internet urls (https://bugzilla.gno...g.cgi?id=758928).

 

But I'll post a reply here everytime I updated the feed :-)

[christophecvr]

It is well my own build from today.

 

With the very last heads.

 

The bug :

 

https://bugzilla.gno...g.cgi?id=758928

 

seemed to be solved.

 

By my duo2 I do not have the flushpad error any more and streams like:

#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3A//xg5tbqm52h1pot9.babahhcdn.com/witch/season1/304680.mp4:Dougnut test
#DESCRIPTION Dougnut test
#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.phoenix.intergi.com/19850/videos/4357110/video-sd.mp4:Test MP4
#DESCRIPTION Test MP4

Do play ok again.

Edited by christophecvr, 10 December 2015 - 13:27.

[MastaG]

Chris that sounds great!

I guess this fixed it? http://cgit.freedesk...29936f8b963e24b

 

Also I guess now  "sportfootbol" will be singing and dancing in the rain ;-)

 

So I should heaten up the server again now :-)

Edited by MastaG, 10 December 2015 - 13:33.

[christophecvr]

Yes I think so. It's cause I just saw that commit concerning the pad that I tried to do a build off very last head.

 

I reported it on

 

https://bugzilla.gno...g.cgi?id=758928

[MastaG]

Well then... I'm spinning a new feed again

if everything goes well, then we can all issue a software upgrade somewhere tomorrow.

[mamamia]

Once more thank you! Please keep up the good work. I would like to buy you guys beers because I think it you are helping loads of people to have fun with e2 in the future. Integrating current gst versions is mandatory for e2 users and devs to be able to influence future gst development.

[fankoosh]

@mastaG , did u delete above links for ur new gst1.7.0 build? is there a new images u gona build soon gst 1.7.0?, thank you

[Purè90]

Hi Dear MastaG what a great job!

My old DM800 was reborn again.

Only a little help, I am trying to install a USB DVB-T pen.

I have two:

- DVB-T AVERMEDIA 867 with chip af9035 and

 

- August DVB-T205 PC  with chip  RTL2832U .

 

They were fully working with Nemesis Image but now also after installing the specific drivers from the Plugin section (and restarted Enigma 2) neither of them were recognized.

I inserted specific settings with DVB-T channels included but in tuner section there is always only the satellite tuner (Alps).

With Nemesis Image the AVERMEDIA 867 pen flashes with a blue light; with your image there is no light.

Thank you in advance.

Bye

[MastaG]

Have you tried restarting the receiver completely?

Enigma2 will not load any kmods, that happens only after a reboot.

 

Please reboot, login using telnet and issue the 'dmesg' command to see whether the driver initialized.

If not then check using 'lsmod' whether your driver got loaded succesfully.

If not then try to manually load it using modprobe.

You can see all available drivers using this command: find /lib/modules/`uname -r`/ | grep '\.ko'

Use modprobe filename (without the full path and no .ko extension)

[Purè90]

Hi Dear MastaG,

there is a problem in the downloading drivers from the feed!

Either for Drivers DVB-USB-AF9035 (1.0-R0) and DVB-USB-RTL2832(1.0-R0) the result on the screen is of error:

OPKG_Install_PKG:Package Enigma2-plugin-drivers-dvb-usb-RTL2832 MD5SUM MISMATCH.  Either the OPKG or the package index are corrupt. Try "OPKG UPDATE" (and I tried without any result).

OPKG_install_CMD cannot install package enigma2-plugin-drivers-dvb-usb-rtl2832.

So where is it possible to download drivers plugin (.ipk) to install it manually?

Thank you in advance.

 

Bye

[dreamboxco]

TurkVod dont work  i become a mini screen not a full screen

 

here is the plugin

 

http://www.file-uplo...ps32el.ipk.html

 

and MediaPortal can't install

 

>>> DONE <<<                                                                   
root@dm7020hd:~# opkg install /var/tmp/imgmod.opk; echo ">>> DONE <<<";        
Installing enigma2-plugin-extensions-mediaportal (7.2.6) on root.              
Collected errors:                                                              
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enig
a2-plugin-extensions-mediaportal:                                              
 *      gst-plugins-good-flv *  gst-plugins-bad-rtmp *  gst-plugins-bad-fragmen
ed *                                                                           
 * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-mediaport
l.                                                                             
>>> DONE <<<                                                                 

Edited by dreamboxco, 11 December 2015 - 17:02.

[dreamboxco]

TurkVod Screen

 

[MastaG]

@Pure90
It seems my build-server's harddrive are getting degraded.
I hope to fix it this weekend.
My apologies.


@dreamboxco
It seems your mediaportal ipk depends on gstreamer 0.10.
Ask the author of the plugin to ship a version thats built against gstreamer 1.x
You could also try to install with --force-depends though.

[MastaG]

Regarding turkvod I don't know.
Maybe the plugin's skin is set to a lower resolution.
Does it work on the original PLi4 image?
If not then contact the author.
I cant imagine using gstreamer 1.x would cause this.

[dreamboxco]

MastaG i am used openatv image and gstreamer 1.70 TurkVod and MediaPortal is ok. No Problems

 

With OpenPli4.0 i have the Problem with TurkVod cant see any Stream in IPTV, in OPENATV i can see the IPTVSTreams.

 

My Problem with OpenPli4.0 ist not only the skin.

[buc61b]

the links are down...

 

regards

[Toysoft]

Pure90,

 

Send these commands,

 

TS

 

 

opkg update

opkg install --force-overwrite v4l-dvb-module-dvb-usb

opkg install --force-overwrite v4l-dvb-module-dvb-a867

reboot

 

 

 

Hi Dear MastaG what a great job!

My old DM800 was reborn again.

Only a little help, I am trying to install a USB DVB-T pen.

I have two:

- DVB-T AVERMEDIA 867 with chip af9035 and

 

- August DVB-T205 PC  with chip  RTL2832U .

 

They were fully working with Nemesis Image but now also after installing the specific drivers from the Plugin section (and restarted Enigma 2) neither of them were recognized.

I inserted specific settings with DVB-T channels included but in tuner section there is always only the satellite tuner (Alps).

With Nemesis Image the AVERMEDIA 867 pen flashes with a blue light; with your image there is no light.

Thank you in advance.

Bye

 

[Purè90]

Dear MastaG, I tryed via Telnet with your suggested commands:

 

opkg update

opkg install --force-overwrite v4l-dvb-module-dvb-usb

opkg install --force-overwrite v4l-dvb-module-dvb-a867

 

but the answer was the same after the second and the third command:

 

depmod: Warning: could not open /lib/modules/2.1.18-7.4-dm800/modules.order:

No such file or directory

 

Any other suggestion?

 

Many thanks alwajs

 

Bye