Receiver Xtrend ET9200 HD Twin, while setting system time GMT+11:00 the time is displayed as +10. Helps neither the installation via the menu nor the manual edit of the file "settings". How to fix?
Not the right time display
Re: Not the right time display #2
Posted 19 May 2016 - 15:19
Switch down the STB and unplug the powercord from the socket and press the powerbutton in the front of the ET9200.
After booting the STB, the correct time should appair after getting a lock from a transponder.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Re: Not the right time display #3
Re: Not the right time display #4
Posted 20 May 2016 - 15:11
Set the startup channel to a transponder that carries the correct time.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Not the right time display #5
Re: Not the right time display #6
Re: Not the right time display #7
Re: Not the right time display #8
Re: Not the right time display #9
Posted 21 May 2016 - 12:40
"while setting system time GMT+11:00 the time is displayed as +10" can imho only be interpreted as "the time displayed is one hour off".
Since the STB is a linux system, it stores its internal time in UTC. If the time displayed is wrong, the time source is wrong. And by default, that is the transponder time. If you can't get that right, install the systemtime plugin, and use it to get the correct time from an NTP time source (it has the option to sync the time manually).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Not the right time display #10
Re: Not the right time display #11
Posted 22 May 2016 - 12:45
That MEANS that the time from your provider (transponder) is wrong. Or that you didn't select the correct time zone.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Not the right time display #12
Posted 22 May 2016 - 13:46
After the transfer on April 27 time our area in a different time zone (from GMT+10 to GMT+11), according to the decision of the local authorities, the problems began for all accessories that sync time from external sources, including Android, iOS, Mac, Windows devices.
Of course, problems arose on the STB with Enigma2. Some problems had to be solved by using non-systemic correction programs. About plugin systemtime didn't know, because never before such problems was not.
Thanks to all who participated in solving my problem.
P. S. Sorry for my English.
Re: Not the right time display #13
Posted 22 May 2016 - 18:21
Why don't you just select the proper timezone then? Proper in this context means the timezone that makes the time correct, not necessarily the one that is dedicated to your country.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Not the right time display #14
Re: Not the right time display #15
Posted 23 May 2016 - 00:41
Erik Slagter and we just wan´t to solve the problem, you have to be a bit cooperative
GMT +10 means you live in Siberia Vladivostok, when you put GMT +11, the time is still diplayed +10, well there are different +11, with or without daylight saving time, you may try some of them or we can even adapt
/usr/share/enigma2/timezone.xml
for you and people having the same problem (for the future)
Re: Not the right time display #16
Posted 23 May 2016 - 06:55
mrvica, thank you for your message!
Nothing, not setting any the installation of no +10 or +11 or +12 in different variants, nor any other time did not lead to its correct mapping. Or in manual mode through the menu or through the edit files (settings, timezone, replace "pool.ntp.org" on "ru.pool.ntp.org" and on the "asia.pool.ntp.org" etc.) - without any effect. This is a system error, this needs to be corrected! By the way, for example, correctly, without plugins, try to put GMT+11.30. How was it?
Re: Not the right time display #17
Posted 23 May 2016 - 10:48
If your government came up with a custom timezone setting that matches none of the others, it can only be addressed by an update of the timezone database.
I assume this is about the change mentioned here: http://mm.icann.org/...ril/000038.html ?
In that case, we need to update to 2016d. Since the current OpenPLi 4 still runs on 2015a, I'd say an update is overdue.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Not the right time display #18
Posted 28 May 2016 - 09:51
Exactly. Either workaround (as I suggested) or the timezones must be updated. There is no other way.
The timezone package is bound to the OE version we're using for the build environment, so it's a bit complex. When release 5 comes out, it will have an up to date timezones package.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Not the right time display #19
Posted 5 June 2016 - 11:43
Exactly. Either workaround (as I suggested) or the timezones must be updated. There is no other way.
The timezone package is bound to the OE version we're using for the build environment, so it's a bit complex. When release 5 comes out, it will have an up to date timezones package.
Thanks, will wait for the 5.0 release.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users