Forums

How to Add a Channel manual if i only know the freq?
how do i knw is added?
need step by step guide heheh

e.g. a tvn chn with 434 freq on channel 175 of my list.

before i come in i had did a bit research but still not very sure

i using DM500C and image was flash with a PLi menu..

well you cant, you also need the apid/vpid/pcrpid

cant you scan ? if not why not ?

if i scan i will lost other channel which already pre-set in the img...

how to find out apid/vpid/pcrpid for that channel.. hehe

well you cant, you also need the apid/vpid/pcrpid

cant you scan ? if not why not ?

well when you scan it will pickup all channels that are on that tp. so if you loose some preexisiting channels, that means those channels no longer exist. so is loosing them a problem ?

ya.. losting them is a problem..
think i re-flash again using the img .. see if there is any improve..
thanks.

I never used a cable DB (North America doesn't use the DVB-c standard besides in the Bahamas I believe), but guessing...

Save your channel list, scan the new channel, open the original & newly scanned services file and add the newly scanned channel's entry to the older service file / channel list, then reload it to the DB...


--
hemi

thanks ~~

can teach me.. which software allow me to do editing on the channel list?

can teach me.. which software allow me to do editing on the channel list?

Dreamboxedit, see henksatsettings page.

wow , you so fast...
thanks! i will try it out.. /images/smiley/smile.gif

hi,
may i know i need to go where to download the service file / channel list,

hi
all i need to following this page
http://www.pli-image...henksatsettings

in order to dl the system channel list?

??
m i right?
just want to make sure
worry i go wrong step

That page describes downloading channel settings from PLi's servers to your DB. IF they had a channel list for your cable service, it may work, but downloading some satellite's settings will do no good for cable reception.Most people probably use DreamboxEdit to make changes to their channel lists. By opening 2 instances of Dbedit, one containing the old mostly working channels, and the 2nd the newly scanned channels, you should be able to drag & drop channels between the 2 lists.

It is generally hard to truly break a DB unless one does foolish things like plugging/unplugging the coax while the box is turned on , etc... If you have DreamUP & a null-modem cable, if anything goes wrong you should be able to recover by reloading a new image 99.5% of the time. Try not to be too scared of messing something up.


--
hemi

Hi
the channel list was done on the list already but due to some changing on the cable tv i will need to re-arrange the list and add in 2 new more channel.. (for new channel i know the apid/vpid/pcrpid.etc)...

if i use DreamboxEdit all i need is to connect using ftp?

hi
may i know what is the transponder id in DreamboxEdit stand for?