Hängt beim Starten
tombolala 21 Aug 2011
Hallo!
Nach einem Neustart kommt das System nicht mehr hoch. Also GUI startet nicht mehr.
Per Telnet kann ich aber auf die Box. Was kann ich nun machen? Wo kann ich nachschauen?
Serielles Kabel und so für bootlog hab ich nicht ...
Danke im Voraus,
tombolala
edit: correct prefix set to DM600
Nach einem Neustart kommt das System nicht mehr hoch. Also GUI startet nicht mehr.
Per Telnet kann ich aber auf die Box. Was kann ich nun machen? Wo kann ich nachschauen?
Serielles Kabel und so für bootlog hab ich nicht ...
Danke im Voraus,
tombolala
edit: correct prefix set to DM600
dAF2000 22 Aug 2011
Welcome on this forum. If you don't mind I'll answer in English, but you can reply in German if you want.
Just a new flash may be the easiest and fastest way. In telnet:
mount /boot -o remount,rw
rm -rf /boot/*
reboot
Open your web browser to the IP address of your box and you will see an option to reflash the box.
Just a new flash may be the easiest and fastest way. In telnet:
mount /boot -o remount,rw
rm -rf /boot/*
reboot
Open your web browser to the IP address of your box and you will see an option to reflash the box.
tombolala 23 Aug 2011
Thanx, that worked fine. Lost my channels, but not too bad ...
Also somehow was not able to get connection to the box. Finally, directly
connected it to my W-LAN router and then everything went fine.
Regards,
tombolala
Also somehow was not able to get connection to the box. Finally, directly
connected it to my W-LAN router and then everything went fine.
Regards,
tombolala