[ UPDATE ] Boblight Enigma2 0.5-r9 DM500HD...
Speedy1985 17 Oct 2012
- Cosmetic
- Better installation. (boblight.conf will be detected and not overwrited if exists)
- You can set a blacklevel in boblight.conf, so the light wil stay on by black pixels
- You can set gamma in plugin
- Lights go now off in standby (set standby mode to on in plugin)
- Threshold added in e2fronded plugin
- Startup/Sleep script fixed
- Wakeup problem fixed
- Blackbar detection (only top/bottom for now)
After installation, you need to start this script:
/usr/bin/boblight-dev.sh
This will install all packs you need.
Usefull tip, for a nice ambilight effect.
If you want the same effect as philips ambilight tv's.
Set the right hscan to 0 30 and left hscan to 70 100
Set the top vscan to 0 30 and the bottom hscan to 70 100
Now boblight wil get the average of the color in the zone from 0 to 30 %
This gives me better colors and smoother.
Set the blacklevel in boblight.conf to 0.1
And set the speed in plugin to 55.
Start/Stop Boblight without Plugin Frondend:
Start the grabber: /etc/init.d/boblight-control start
Stop the grabber: /etc/init.d/boblight-control stop
Restart grabber: /etc/init.d/boblight-control restart
Use other client, when grabber is sleeping
Start a boblight client on other box or pc.
On linux:
export DISPLAY=0:0
boblight-X11 -s iptodeamon -o value=10
On XMBC you can give a ip and port.
Test paterns:
Start boblightd -f in telnet
boblight-chase 1 ffcc gives you a chase (ctrl+c is cancel)
boblight-chase 3 ffcc gives you a rainbow
boblight-chase 4 ffcc gives you a rainbow
boblight-chase 5 ffcc00 gives you a color, this is orange/yellow
boblight-chase 5 cc0000 gives you a color, this is red
Atmolight users with 4 leds strips, can use the config in attachement.
Rename to boblight.conf and replace in /etc
Don forget to edit /etc/boblight.conf. without a boblight.conf: no light.
if there is a error, please post it.
For support i'am in chat in evening @ webchat.freenode.net # boblight-enigma2
Kind regards Speedyisfast
Attached Files
Speedy1985 17 Oct 2012
SEDU Ambilight – Artikelserie – Einleitung, Aufbau und Allgemeines
SEDU Ambilight – SEDU-Board mit SEDUsetup konfigurieren
SEDU Ambilight – boblight.conf mit BoblightConfigTool für boblightd erzeugen
SEDU Ambilight – Dreambox – Boblight Plugin (boblightd und boblight-enigma2) installieren und konfigurieren
SEDU Ambilight – HTPC – boblight-X11 mit dem boblightd Dienst der Dreambox verbinden
nietgiftig 17 Oct 2012
Raadzaam om de oude eerst te de-installeren?
Of kan het er gewoon overheen?
Speedy1985 17 Oct 2012
De andere laten voor wat het is. zit fout in standby script.
Deze werkt wel goed..
@Nietgiftig: Yep eerst oude ff deinstalleren.
Attached Files
Edited by Speedy1985, 17 October 2012 - 19:19.
nietgiftig 17 Oct 2012
Zag je antwoord
Heb de nieuwe gedownload en toe eerst ge-deinstalleerd.
Daarna de nieuwe geinstalleerd, bolight-dev.sh gerunt.
Krijg nu een foutmelding als ik het menu plugin oproep
zie scherm
Attached Files
Speedy1985 17 Oct 2012
Had de eerste al geinstalleerd, er gewoon overheen gezet, boblight werkte
Zag je antwoord
Heb de nieuwe gedownload en toe eerst ge-deinstalleerd.
Daarna de nieuwe geinstalleerd, bolight-dev.sh gerunt.
Krijg nu een foutmelding als ik het menu plugin oproep
zie scherm
ff reboot doen.
Als dat niet werkt: \etc\enigma2\settings openen en 9.0 veranderen in 9, dan reboot.
Gr Speedy
nietgiftig 17 Oct 2012
ff reboot doen.
Als dat niet werkt: \etc\enigma2\settings openen en 9.0 veranderen in 9, dan reboot.
Reboot had ik al gedaan
config.plugins.Boblight_grab.value=9.0 veranderd in 9
Maar als ik enigma opnieuw opstart wordt dit weer terug gezet naar 9.0, ook na een reboot
Meega 17 Oct 2012
ff reboot doen.
Als dat niet werkt: \etc\enigma2\settings openen en 9.0 veranderen in 9, dan reboot.
Reboot had ik al gedaan
config.plugins.Boblight_grab.value=9.0 veranderd in 9
Maar als ik enigma opnieuw opstart wordt dit weer terug gezet naar 9.0, ook na een reboot
Heb je eerst init 4 gedaan?
nietgiftig 17 Oct 2012
Heb je eerst init 4 gedaan?
Nee , nu wel
Bedankt
Kan nu weer de Boblight plugin oproepen
Helaas geen licht meer
Maar dat zal ongetwijfeld komen doordat Speedy mijn box getweaked had om het te laten werken.
Gelukkig heb ik een full backup om weer terug te gaan.
Ik ga het opnieuw proberen
Speedy1985 17 Oct 2012
Heb je eerst init 4 gedaan?
Nee , nu wel
Bedankt
Kan nu weer de Boblight plugin oproepen
Helaas geen licht meer
Maar dat zal ongetwijfeld komen doordat Speedy mijn box getweaked had om het te laten werken.
Gelukkig heb ik een full backup om weer terug te gaan.
Ik ga het opnieuw proberen
Hoi,
Als je /dev/ttyACM0 weer kwijt bent doe je het volgende:
installeer nano 'opkg install nano'
nano /etc/init.d/bootmisc.sh
dan zet je onderin (net voor de lijn : exit 0) modprobe -a cdc_acm
dan opslaan met ctrl+x en vervolgens Y om te accepteren.
Nu reboot doen en klaar.
ALs alles goed is gegaan moet je nu weer ttyACM0 hebben.
Ik moet hier nog iets voor vinden dat dit automatisch gaat.
Maar wil niet dat de installer in bootmisc gaat klooien dus moet ff goed kijken hoe ik dat ga doen.
Gr Speedy
Edited by Speedy1985, 17 October 2012 - 20:56.
Meega 17 Oct 2012
Zet ik hem op deactiveren wel.
Deze melding krijg ik met standby aan.
root@dm8000:~# /etc/init.d/boblight-control start
/etc/init.d/boblight-control: line 165: [: !=: unary operator expected
Checking if Boblightd is running: Boblightd is not running! starting deamon....
boblightd © 2009 bob loosen (modded by Martijn Vos - see source for more information)
(InitLog) start of log /home/root/.boblight/boblightd.log
(PrintFlags) starting /usr/bin/boblightd -f
(CConfig::LoadConfigFromFile) opening /etc/boblight.conf
(CConfig::CheckConfig) checking config lines
(CConfig::CheckConfig) config lines valid
(CConfig::BuildConfig) building config
(CConfig::BuildConfig) built config successfully
(main) starting devices
(CClientsHandler::Process) opening listening socket on *:19333
(CDevice::Process) ambilight: starting with output "/dev/ttyUSB0"
(CDevice::Process) ambilight: setting up
(CDevice::Process) ambilight: setup succeeded
Starting Grabber...
root@dm8000:~# ERROR: Unkown option q
Usage: boblight-enigma2 [OPTION]
options:
-p priority, from 0 to 255, default is 128
-s address:[port], set the address and optional port to connect to
-o add libboblight option, syntax: [light:]option=value
-l list libboblight options
-i set the interval in seconds, default is 0.1 (100 milliseconds)
-u maximum size for the intermediate image (default 128)
-d debug mode.
-g picture dump mode. Be carefull! this stores a lot of image data to /tmp!
-f fork
-y set the sync mode, default is on, valid options are "on" and "off"
En met standby off
root@dm8000:~# /etc/init.d/boblight-control start
/etc/init.d/boblight-control: line 165: [: !=: unary operator expected
Checking if Boblightd is running: Boblight deamon running with PID 27221....
Starting Grabber...
root@dm8000:~# boblight-enigma2 0.5r9 © 2012 Martijn Vos(speedyisfast) and c@rstenpresser.de - see source for more information
Connecting to boblightd
(CClientsHandler::Process) 127.0.0.1:41832 connected
(CClientsHandler::ParseMessage) 127.0.0.1:41832 said hello
Connection to boblightd opened
(CClientsHandler::ParseSet) 127.0.0.1:41832 priority set to 128
Gamma not set, using 2.2 since this is default for video
[grabber] found STB-Type 2
[grabber] Maximum intermediate-picture-size is 128px
[grabber] Sync mode is on
[grabber] Setting Resolution to 120x66 (Source 1920x1080)
Edited by Meega, 17 October 2012 - 20:57.
Speedy1985 17 Oct 2012
Als ik standby op activeren zet starten de leds niet.
Zet ik hem op deactiveren wel.
Deze melding krijg ik met standby aan.
root@dm8000:~# /etc/init.d/boblight-control start
/etc/init.d/boblight-control: line 165: [: !=: unary operator expected
Checking if Boblightd is running: Boblightd is not running! starting deamon....
boblightd © 2009 bob loosen (modded by Martijn Vos - see source for more information)
(InitLog) start of log /home/root/.boblight/boblightd.log
(PrintFlags) starting /usr/bin/boblightd -f
(CConfig::LoadConfigFromFile) opening /etc/boblight.conf
(CConfig::CheckConfig..........
Klopt!
Heb reeds een nieuwe geupload. http://openpli.org/f...post__p__307482
[Oude ff verwijderen]
Gr martijn
Edited by Speedy1985, 17 October 2012 - 20:59.
nietgiftig 17 Oct 2012
Daarna gewoon voor het uitproberen zonder un-install de nieuwe erop gezet en ge-reboot
Boblight geeft licht
Krijg het boblight menu, met 05.r9 in de kop
Maar de menu items zijn van 05.r6.
Dat gaat dus niet echt goed
Ga je laatste post uitproberen, maar dat wordt weer morgen
nietgiftig 17 Oct 2012
Boblight video [VU Ultimo]
https://www.youtube....h?v=64JNs1al9Ro
Je moet het eens zien met een 50 LEDs WS string, ziet er nog veel mooier uit
Elke 5,5 centimeter langs de rand van mijn 46"" geeft zijn eigen corresponderende kleur bij mij
Verbazingwekkend mag ik wel zeggen
Speedy1985 17 Oct 2012
Boblight video [VU Ultimo]
https://www.youtube....h?v=64JNs1al9Ro
Je moet het eens zien met een 50 LEDs WS string, ziet er nog veel mooier uit
Elke 5,5 centimeter langs de rand van mijn 46"" geeft zijn eigen corresponderende kleur bij mij
Verbazingwekkend mag ik wel zeggen
zet eens een filmpje online dan
Ja daar ben ik ook wel benieuwd naar.
nietgiftig 18 Oct 2012
zet eens een filmpje online dan
Ja daar ben ik ook wel benieuwd naar.
Bij deze
http://youtu.be/U2lhPAy9jcI
Speedy1985 18 Oct 2012
Wat zit er ook alweer achter ??
Edited by Speedy1985, 18 October 2012 - 13:58.