Jump to content


Photo

[DM800SE] Few problems with OpenPLI 3.0

cifs network reset reboot partition

  • Please log in to reply
2 replies to this topic

#1 smile20

  • Member
  • 33 posts

0
Neutral

Posted 14 February 2013 - 17:47

Hello
First of all.... I have connected to my router: computer and dreambox. I share few partitions(computer) to my dreambox. Everything is setup(cifs): ip, login, pass etc At start everything works well. When my computer was turned on, everything was ok, BUT if i turn off computer and next turn on, dreambox has some issues. It doesnt see shared partitions I mean it doesnt see my computer. In this situation always helped(at OpenPLI 2.1) "remount/mount again(dont know if i called it good, because i have polish language" in network setup, when i upgraded OpenPLI to 3.0 it stoped to work. When i push "remount" i got "cogs-wheels"(once again i dont know how to call it) in left, top corner and it wont stop, only reset box(turn off the power) fix this problem. It happens all the time, when i turn off and turn on computer, i have to reset dreambox to see my computer. It annoys me, because its waste of time, also every reset of dreambox clean EPG.

Second problem. If i want to reset dreambox by menu(reset receiver), when i push it, it starts reset>dark(black) screen>and once again "cogs-wheels" on left top corner and nothing more. i have to turn off the power and next turn on.

All this problems started after upgrade to 3.0. Any solutions? First problems really annoing me I watch alot of movies/tv series, i cant reset box everytime i turn off computer. If there wont be any solution can I install by browser older software 2.1 without any problems? I mean 3.0 has newer SSL84.

Re: [DM800SE] Few problems with OpenPLI 3.0 #2 jackson

  • Member
  • 26 posts

0
Neutral

Posted 17 February 2013 - 17:30

Using Help on remote control I get green screen and it reboot, this I had on Openpli 2.1 end now on Openpli3.0
Thanks for help


DM500HD

Edited by jackson, 17 February 2013 - 17:32.

DM500HD-DM800SE  OpenPli4.0


Re: [DM800SE] Few problems with OpenPLI 3.0 #3 smile20

  • Member
  • 33 posts

0
Neutral

Posted 22 February 2013 - 14:08

Still waiting for answer, its important. At polish forum someone has told me that, mount problem should be fixed by script at rc3.d. Tried something like that, new file in "/var/etc/rc3.d" called it "S99mount_PC", edited:

mount -t cifs //192.168.0.2/E /mnt/Pliki -o rw,nolock,rsize=8192,wsize=8192,user=xxx ,password=xxx

but it didnt work, i mean i couldnt even mount it, didnt see any partitions. Any more solutions? If there wont be any, can i easly go back to 2.1 by webrowser? without changing manualy SSL?



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users