VU+ SOLO bricked/not booting after latest update
Begonnen door: Coathanger, 25 aug 2013 16:26
VU+ SOLO bricked
Er zijn 8 reacties in dit onderwerp
#1
Geplaatst op 25 augustus 2013 - 16:26
Hi guys,
After running the latest update within the setup menu, the update downloads/box reboots but then I get no output whatsoever. The LED on the front is permanently blue. I can't FTP into the box and it doesn't register on the network after the latest update.
I've had OpenPLI on my VU+ SOLO for a few months now. The original image on my USB when I first installed OpenPLI is dated 16/06/2013. I have used the update option inside the setup menu a few times previously but the latest update seems brick the box.
I powered off the box and plugged in the USB stick with the image from 16/06/2013 which brings the box back to life. I then updated again but chose the option not to automatically reboot. I then manually rebooted and the box wouldn't output. I can't understand why the box is getting bricked with the latest update. I can't even ftp into it to get the error log.
Any help would be appreciated.
After running the latest update within the setup menu, the update downloads/box reboots but then I get no output whatsoever. The LED on the front is permanently blue. I can't FTP into the box and it doesn't register on the network after the latest update.
I've had OpenPLI on my VU+ SOLO for a few months now. The original image on my USB when I first installed OpenPLI is dated 16/06/2013. I have used the update option inside the setup menu a few times previously but the latest update seems brick the box.
I powered off the box and plugged in the USB stick with the image from 16/06/2013 which brings the box back to life. I then updated again but chose the option not to automatically reboot. I then manually rebooted and the box wouldn't output. I can't understand why the box is getting bricked with the latest update. I can't even ftp into it to get the error log.
Any help would be appreciated.
Re: VU+ SOLO bricked/not booting after latest update #2
Geplaatst op 25 augustus 2013 - 17:02
So I have tested all the nightly builds going in order from newest to oldest:
OpenPLi-3.0-beta-vusolo-20130825_usb (Doesn't boot)
OpenPLi-3.0-beta-vusolo-20130824_usb.zip (Doesn't boot)
OpenPLi-3.0-beta-vusolo-20130823_usb.zip (Doesn't boot)
OpenPLi-3.0-beta-vusolo-20130820_usb (Works)
I have also gone back 1 day to test OpenPLi-3.0-beta-vusolo-20130819_usb this works too. I'm not sure what changes were made between the builds 20-23rd August build but there seems to be an issue.
OpenPLi-3.0-beta-vusolo-20130825_usb (Doesn't boot)
OpenPLi-3.0-beta-vusolo-20130824_usb.zip (Doesn't boot)
OpenPLi-3.0-beta-vusolo-20130823_usb.zip (Doesn't boot)
OpenPLi-3.0-beta-vusolo-20130820_usb (Works)
I have also gone back 1 day to test OpenPLi-3.0-beta-vusolo-20130819_usb this works too. I'm not sure what changes were made between the builds 20-23rd August build but there seems to be an issue.
Veranderd door Coathanger, 25 augustus 2013 - 17:03
Re: VU+ SOLO bricked/not booting after latest update #3
Re: VU+ SOLO bricked/not booting after latest update #4
Re: VU+ SOLO bricked/not booting after latest update #5
Re: VU+ SOLO bricked/not booting after latest update #6
Geplaatst op 25 augustus 2013 - 19:07
The setup loaded again this time I chose automatic scan instead of manual and it worked fine. Any idea what was updated between update on 20 & 23?And when you skip the scan and perform it later?
AttributeError: 'ScanSetup' object has no attribute 'typeOfScanEntry'
Veranderd door Coathanger, 25 augustus 2013 - 19:07
Re: VU+ SOLO bricked/not booting after latest update #7
Geplaatst op 25 augustus 2013 - 19:09
Openpli-openpli-oe-core git [milo-software] vuplus-dvb-modules: Update to 20130819
genuine box:
Re: VU+ SOLO bricked/not booting after latest update #8
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers