Jump to content


Photo

DM800HD Se, HDMI-CEC and LG TV (2012 mod)

dm800se hdmi cec hdmicec

  • Please log in to reply
14 replies to this topic

#1 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 26 January 2014 - 21:18

Hi All,

 

Dear support I very hope on your help.

I read many descriptions of this problem but didn't find solution.

 

DM800Se connected to LG TV via HDMI-CEC, all functions HDMI-CEC work perfectly, except one:

receiver doesn't go to Standby mode with LG TV.

 

Example 1:

1. TV in standby mode, DM in standby mode too.

2. TV wakeup, DM wakeup too.

After some seconds I press Power Off on TV remote control:

3. TV go standby, DM go standby too.

 

Example 2:

1. TV in standby mode, DM in standby mode too.

2. TV wakeup, DM wakeup too.

I watch TV, list channels, 5 minutes and more, then press Power Off on TV remote control:

3. TV go standby, DM doesn't do anything, stay power on.

4. I press Power On on TV remote control, TV wakeup, DM go standby and then wakeup.

 

See logs from Dreambox in attach.

 

This problem have solution?
I don't think that the TV sends 0x36 commands after Power On.

 

Thanks for your help!

Attached Files


DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #2 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 30 January 2014 - 19:09

No help, no support, no ideas? :(


DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #3 antoine3_dupres

  • Member
  • 30 posts

0
Neutral

Posted 31 January 2014 - 18:00

With my vu duo and open pli 4 and this plugin I get different behaviour depending on the sequence of the first startup! Things works well when I switch on (with power switch) the TV, then switch on (with the power switch) the vu duo.
Looks like there is some kind of initialistion at first switch on.
Then I use the standby only on TV or VuDuo and everything works fine.

Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #4 ims

  • PLi® Core member
  • 13,608 posts

+211
Excellent

Posted 31 January 2014 - 18:42

it seems as TV do not sending well 0x36 (standby) and send it on it's next wake up ?

On some LG was problem with HDMI, as I read some time ago.

 

When TV goes to standby, it must send 0x36 (standby) always.


Kdo nic nedělá, nic nezkazí!

Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #5 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 1 February 2014 - 17:34

In /usr/lib/enigma2/python/Components/HdmiCec.py I have added function:

 

        elif message == "lgvendorid":
            cmd = 0x8c

and then:

            elif cmd == 0x8c: # request vendor id
                self.sendMessage(message.getAddress(), 'vendorid')

                self.sendMessage(message.getAddress(), 'lgvendorid')

 

Now, if the TV asks "0x8c" from Dreambox, the Dreambox asks from TV "0x8c" too.

I thought it will resolve problem, but the situation didn't change :(
But the DM and TV have more cheerful talking now  :)


Edited by urick, 1 February 2014 - 17:38.

DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #6 ims

  • PLi® Core member
  • 13,608 posts

+211
Excellent

Posted 1 February 2014 - 18:27

vendor info is relevant for nothing...

 

As i wrote, it seems, that TV does not send 0x36 when it is goes t ostanby. And on next wake-up it send 0x36 => box to standby and then is box waked by starting TV again.


Kdo nic nedělá, nic nezkazí!

Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #7 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 1 February 2014 - 18:52

See here: http://libcec.pulse-.../vendor/support (there is a special note for LG)

 

Simplink is (messy) LG implementation of HDMI-CEC. If you like to spend some time, check remote control passthrough (forward keys), last time i check they didn't work for my LG TV.

 

Good luck.


Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #8 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 1 February 2014 - 20:18

Thanks for your help.

 

All other functions from LG remote control for Dreambox work perfectly.

But unclear, it is LG TV doesn't send commands after StandBy or Dreambox (OE) drivers don't accept these x36 commands.

 

Probably, it is necessary to wait new programs from Pli and new firmware from LG.

 

I will experiment....


DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #9 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 1 February 2014 - 20:33

vendor info is relevant for nothing...

 

I thought if Derambox regularly will asks TV, TV won't forget to send a х36 command to Derambox before go to Standby mode :D


Edited by urick, 1 February 2014 - 20:34.

DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #10 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 2 February 2014 - 19:55

Small specification.

 

Possible many and long list channels from the DM remote control, then press Power key on TV remote control - TV go to standby, and DM standby too.

If for control use TV remote control for list channels, left, right, up, down Ok or exit butons, LG TV won't send a command x36 to receiver.

 

eHdmiCEC: received message 1A 03
eHdmiCEC: received message 44 00
action ->  InfobarChannelSelection openServiceList
eHdmiCEC: received message 45
eHdmiCEC: received message 1A 03
eHdmiCEC: received message 44 0D
action ->  OkCancelActions cancel
eHdmiCEC: received message 45
 

It is enough for extinction of normal work.

I hope OpenPli programmers in future will find solution.


DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #11 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 12 September 2014 - 15:00

Small specification.

 

Possible many and long list channels from the DM remote control, then press Power key on TV remote control - TV go to standby, and DM standby too.

If for control use TV remote control for list channels, left, right, up, down Ok or exit butons, LG TV won't send a command x36 to receiver.

 

eHdmiCEC: received message 1A 03
eHdmiCEC: received message 44 00
action ->  InfobarChannelSelection openServiceList
eHdmiCEC: received message 45
eHdmiCEC: received message 1A 03
eHdmiCEC: received message 44 0D
action ->  OkCancelActions cancel
eHdmiCEC: received message 45
 

It is enough for extinction of normal work.

I hope OpenPli programmers in future will find solution.

 

Hi All.

Problem is solved by GL programmers in new TV-firmware.

I wrote letter to LG support few months ago and after update x36 function via HDMI-CEC works perfectly. :D


Edited by urick, 12 September 2014 - 15:02.

DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #12 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 1 November 2014 - 13:55

Oh, oh, oh....

I have update my DM800SE at 24 nov 14 and HDMI-CEC not working correctly agayn :(

Same problem

Please help :( :( :(


DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #13 ims

  • PLi® Core member
  • 13,608 posts

+211
Excellent

Posted 1 November 2014 - 14:29

you must look on cable etc... there in HDMI-CEC was changed nothing for long time.


Kdo nic nedělá, nic nezkazí!

Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #14 urick

  • Senior Member
  • 28 posts

0
Neutral

Posted 6 April 2016 - 12:34

A lot of time I couldn't understand the reason. Some time works perfectly, then problem came back.

I found reason and solution :D

 

Attention! SOLUTION: Set the Clock on TV!

 

It's all, I have checked several times. ha-ha-ha


DM800HD Se, OpenPli 4.0

LANS-90 to 36E


Re: DM800HD Se, HDMI-CEC and LG TV (2012 mod) #15 rpintea

  • Member
  • 20 posts

0
Neutral

Posted 1 June 2016 - 18:46

Please help, i have this problem:
I want to control DM800se with Magic Remote form LG TV.
DM800Se connected to LG TV via HDMI-CEC, all functions HDMI-CEC work perfectly, except one:

I select "Wakeup signal from TV" = "Any activity", then press Power Off on TV remote control. TV and DM800se goes to standby mode, but after 5-10 seconds TV and DM800se wakeup automatically...
If i select "Wakeup signal from TV" = "Wakeup (or any another option)", then press Power Off on TV remote control, TV and DM800se goes to standby mode. Then press Power On on TV remote control, TV wake up, but DM800se doesn't do anything...

This problem have a solution?
Thanks





Also tagged with one or more of these keywords: dm800se, hdmi, cec, hdmicec

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users