Small note : since you're reader seems to be ccid compliant.
It might be possible to add you're readers vendor id ker product key and friendly name to the Info.plist If it is not in that list.
First find that info for you're reader with lsusb on a linux pc (on stb you will need the installation off usbutils which is pretty big package should be avoided the base busybox lsusb version does not give friendly name)
lsusb like for my reader :
Bus 007 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
If this vendor ID 076b by my reader product id 3021 friendly name Omnikey AG ... For my reader ok it is in the ccid bindle list.
If the result off You're reader is not in the Info.plist which You can find under map /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents
You always can try to add it. Very very important they must be all three in at same position. relatif to the list vendorid product id friendly name.
Use a good text file editor (not a windows one !!!) gedit is perfect for that. If you use windows on pc ask windows expert what to use as wrong editor screws linux/unix/mac config files
When a ftp client handler is used such as filezilla to download and or upload this file. Always force editing with utf8 and transfer binary (not ascii ascii transfer will screw up the whole file)
If you're reader is not in the list as example the vendor id = 0ddf product id = 9925 friendly name = digicom not supported (find the real values for you're reader)
ad it like this always at the end off each list
<key>ifdVendorID</key>
<array>
<string>0x072F</string>
--- go to end of this array
<string>0x062D</string>
<string>0x0DDF</string> // vendor id of you're reader
</array>
-- next aray product id go also to end--
<string>0x0001</string>
<string>0x9925</string> // product id off you're reader
</array>
-- next aray friendly name go also to end odd array ---
<string>THRC Smart Card Reader</string>
<string>digicom not supported</string> // add the real fiendly name off You're reader
</array>
safe you'remodified file sorry but again NOT A WINDOWS EDITOR.
unplug the reader iff plugged.
reboot you're box . after boot plugin the reader there is big chance that it will work (I did this once with a very cheap reader buyed in fnac which was not in base Info.list and it worked)
Edited by christophecvr, 18 April 2014 - 09:08.