Er zijn 10 reacties in dit onderwerp

[Rob van der Does]

When saying 'no' to 'use USALS for this satellite' the own position still shows. As this has no function, would it be possible to show own position only when using USALS?

[littlesat]

What exactly do you mean. Can you offer some screenshots?

[Rob van der Does]

In tuner config set DiSEqC 1.2; then you get a whole series of options. Amongst them the own location. That's fine when using USALS, as then the own location is of course required.

But when choosing the option not to use USALS for this satellite, the own position is superfluous as it's not being used. And not used entries should not show.

 

So: when 'use USALS for this satellite' has been set to 'no', the own position should disappear.

[Alain_sat]

This is what he means.

 

 

Now this is OpenPLi 3.0 I don't know if it's the same in 4.0.

In this case the option to use Usals comes just behind Latitude what also is illogical.

It's correct that non relevant options should be greyed when another option make them obsolete, but it' s a minor issue.

[Huevos]

When saying 'no' to 'use USALS for this satellite' the own position still shows. As this has no function, would it be possible to show own position only when using USALS?

@@ -354,10 +354,6 @@
 					self.list.append(self.uncommittedDiseqcCommand)
 					self.list.append(getConfigListEntry(_("DiSEqC repeats"), currLnb.diseqcRepeats))
 				if currLnb.diseqcMode.value == "1_2":
-					self.list.append(getConfigListEntry(_("Longitude"), currLnb.longitude))
-					self.list.append(getConfigListEntry(" ", currLnb.longitudeOrientation))
-					self.list.append(getConfigListEntry(_("Latitude"), currLnb.latitude))
-					self.list.append(getConfigListEntry(" ", currLnb.latitudeOrientation))
 					if SystemInfo["CanMeasureFrontendInputPower"]:
 						self.advancedPowerMeasurement = getConfigListEntry(_("Use power measurement"), currLnb.powerMeasurement)
 						self.list.append(self.advancedPowerMeasurement)
@@ -376,7 +372,12 @@
 							currLnb.powerMeasurement.save()
 					self.advancedUsalsEntry = getConfigListEntry(_("Use USALS for this sat"), Sat.usals)
 					self.list.append(self.advancedUsalsEntry)
-					if not Sat.usals.value:
+					if Sat.usals.value:
+						self.list.append(getConfigListEntry(_("Longitude"), currLnb.longitude))
+						self.list.append(getConfigListEntry(" ", currLnb.longitudeOrientation))
+						self.list.append(getConfigListEntry(_("Latitude"), currLnb.latitude))
+						self.list.append(getConfigListEntry(" ", currLnb.latitudeOrientation))
+					else:
 						self.list.append(getConfigListEntry(_("Stored position"), Sat.rotorposition))
 					self.list.append(getConfigListEntry(_("Tuning step size") + " [" + chr(176) + "]", currLnb.tuningstepsize))
 					self.list.append(getConfigListEntry(_("Memory positions"), currLnb.rotorPositions))

[Huevos]

Here's a screenie.

 

 screenshot.jpg   57,17K   36 Aantal bijlagen

 

 screenshot2.jpg   55,77K   36 Aantal bijlagen

[Huevos]

BTW, code above is in file

/usr/lib/enigma2/python/Screens/Satconfig.py

[Rob van der Does]

BTW, code above is in file
/usr/lib/enigma2/python/Screens/Satconfig.py

Working fine, thanks!

[littlesat]

Can you offer a complete patch or py? (To avoid typos).

[Huevos]

Here's the py.

Bijgevoegde Bestanden

•  satconfig.py.zip   5,99K   4 Aantal bijlagen

[Alain_sat]

Thanks, is working.