Jump to content


Photo

Dreambox dm7020hd: Streaming from OpenPli 4 (to XBMC or PC using VLC)

dm7020hd streaming XBMC VLC

  • Please log in to reply
3 replies to this topic

#1 pe2mbs

  • Member
  • 12 posts

0
Neutral

Posted 31 July 2014 - 07:49

See also post : http://openpli.org/f...nigmavu-client/

 

Currently the streaming just stops after a undefined period of time, when the stream is stopped in VLC and (re-)opened agian, the busy animation becomes active on the TV. This takes about 15 mins. Then it recovers and the TV zaps (when running from 2 tuners) to the channel that was streaming and the streaming on the PC resumes as well. The following messages are taken from "/var/log/messages" and this seems to be why the stream stops.
 
  Jul 27 09:36:09 dm7020hd user.warn kernel: [ 3974.525000] ch0: unlock
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.103000] ch0: lock
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.454000] rap watchdog flush!
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.454000] flush audio decode
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.456000] video delay 0 (0 ms)
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.456000] total video delay: 0 (0 ms)
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.462000] RAP first pts 0x942c2cd6, stc 0x942c1274, pcr valid
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.465000] audio_cdb_itb_error_isr: 4 callbacks suppressed
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.465000] audio_cdb_itb_error_isr! underflow
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.469000] audio_cdb_itb_error_isr! underflow
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.473000] audio_cdb_itb_error_isr! underflow
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.477000] audio_cdb_itb_error_isr! underflow
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.482000] audio_cdb_itb_error_isr! underflow
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.484000] ch0: lock
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.484000] RAP sampling rate info isr (48000)
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.484000] eModeChange Isr.. set source_changed_event!
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.484000] RAP pts error 0 PTS 0x4a16166b, STC 0x4a160d2b, type 0
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.486000] audio_cdb_itb_error_isr! underflow
  Jul 27 09:36:10 dm7020hd user.warn kernel: [ 3975.490000] audio_cdb_itb_error_isr! underflow
 
The time on the Dreambox LCD is 09:37, the Dreambox is always the same 15mins = 900secs busy. I didn't found any triggers for this. When it recovers at 09:51 no messages appear in the "/var/log/messages" log. After 2 mins the following appears in the log so thats just some normal messages.
 
  Jul 27 09:53:54 dm7020hd user.info kernel: [ 5039.699000] bcm4506: signal_strength -196.68dbm
  Jul 27 09:53:55 dm7020hd user.info kernel: [ 5040.723000] bcm4506: signal_strength -196.56dbm
  Jul 27 09:53:56 dm7020hd user.info kernel: [ 5041.747000] bcm4506: signal_strength -196.65dbm
  Jul 27 09:53:57 dm7020hd user.info kernel: [ 5042.771000] bcm4506: signal_strength -196.56dbm
  Jul 27 09:53:58 dm7020hd user.info kernel: [ 5043.795000] bcm4506: signal_strength -197.26dbm
 
During the busy period of the Dreambox, the OpenWebif, remote control nor buttons are not responding. You can still login to the Dreambox using SSH. I did some tracing of the engina2 application, but the only messages comming out are;
 
  [eFilePushThreadRecorder] Warning: All write buffers busy
  [eDVBRecordFileThread] cancelling
  [eDVBRecordStreamThread] failed to cancel, killing all waiting IO
  [eDVBRecordFileThread] poll: aio_return returned failure: Value too large for defined data type
  [eDVBRecordFileThread] poll: aio_return returned failure: Value too large for defined data type
  [eDVBRecordFileThread] poll: aio_return returned failure: Value too large for defined data type
  [eDVBRecordFileThread] Waiting for I/O to complete
 
These messages repeat themselfs, but when the enigma2 application is BUSY no messages are being outputed. But i think this is releated to the CCcam share slowly or not responding sometimes.  
 
My Dreambox has two S2 tuners, and there is no difference in behaviour between running the stream from the same tuner (one tunner active (ZAP)), or running from active 2 tuners with different channels.
 
I think that XBMC vuplus add-on has a more aggresive connection strategy to which results in sometimes hanging up the Dreambox completly. 
 
 
 
Any ideas how to find and/or solve the problem ? 
 
Marc

DM7020HD OpenPLi 4.0 

HTPC OpenELEC (official) Version: 4.0.6 - XBMC 13.1


Re: Dreambox dm7020hd: Streaming from OpenPli 4 (to XBMC or PC using VLC) #2 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,469 posts

+118
Excellent

Posted 31 July 2014 - 21:00

We stopped supporting DMM boxes months ago

on the Glassfibre 1GB DVB-C...


Re: Dreambox dm7020hd: Streaming from OpenPli 4 (to XBMC or PC using VLC) #3 pe2mbs

  • Member
  • 12 posts

0
Neutral

Posted 4 August 2014 - 19:24

We stopped supporting DMM boxes months ago

 

What do you mean with this ? what does openpli support ? 


DM7020HD OpenPLi 4.0 

HTPC OpenELEC (official) Version: 4.0.6 - XBMC 13.1


Re: Dreambox dm7020hd: Streaming from OpenPli 4 (to XBMC or PC using VLC) #4 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,469 posts

+118
Excellent

Posted 4 August 2014 - 20:20

See our topic regarding active support for dmm boxes

dmm builds automaticly as other brands but if things fail it fails and we do not fix it anymore ourselves or someone has to deliver us à patch

on the Glassfibre 1GB DVB-C...




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users