Forums

I have dm800se with OpenPLi 4.0 image in the slot is Viaccess card. I use cccam 2.30 which is often blocked during the day. Is there any way to solve it?

Thanks for help

Don't allow cccam to talk to outside world (WAN), some one else is using your card ????

You are using inhouse clients that using more channels (viewing/recording) then the card permits ????

Maybe you should start with your definition of "blocking". What happens exactly? And in what situation? What is your setup, only a local box, or also other boxes using the card? How many, and where are these?

ok my definition of blockig is that when I'm looking a program at  one  the  image  freeze,  it gives me Error reading webpage, then I had to restart softcam, and so on a few times . It block with card and without the card?

What has watching TV have to do with reading a webpage? So I guess you're doing something else?

when it block I go on cccaminfo (blue baton) it give Error reading webpage, then I have to restart cccam.

cccaminfo retrieves the same as what you see when you go to http://ip-of-your-box:16001 it retrieves the info via CCcam's web interface. If CCcam isn't running, you get this error.

CCcam is known to crash on certain channels, Motors TV being very notorious for it.

To figure out what it is, log into the box with telnet or ssh (depending on what you have enabled), and type:

killall CCcam
/usr/bin/CCcam -d

this will start CCcam in debug mode, and you will see a log appearing on the terminal. Now start zapping, and when CCcam crashes again, copy and past the last 10 lines or so here.

I have set the log in box with  telnet and here's the result:

( 20:17:23.843 CCcam: EMM: not interested in 0500:032920                         
20:17:23.843 CCcam: EMM: not interested in 0500:032940                         
20:17:23.843 CCcam: EMM: not interested in 0500:023600                         
20:17:23.843 CCcam: EMM: not interested in 0500:043330                         
20:17:23.844 CCcam: EMM: not interested in 0500:043300                         
20:17:23.844 CCcam: EMM: not interested in 0500:030B10                         
20:17:23.844 CCcam: EMM: not interested in 0500:030B00                         
20:17:23.844 CCcam: EMM: not interested in 0500:032840                         
20:17:23.897 CCcam: viaccess emu can't decode ecm (key:a ident:30b00)          
20:17:23.897 CCcam: cam[0] ecm odd nok caid:0x500 id:0x30b00 pid:0x1a2d Unknown
20:17:23.920 CCcam: cam[0] ecm odd nok caid:0x500 id:0x32830 pid:0x1a2e Unknown
20:17:24.020 CCcam: cam[0] ecm odd nok caid:0x100 id:0x3317 pid:0x1646 Unknown
20:17:24.098 CCcam: cam[0] ecm odd nok caid:0x100 id:0x3315 pid:0x1645 Unknown
20:17:24.099 CCcam: cam[0] ecm odd nok caid:0x100 id:0x3311 pid:0x1644 Unknown
20:17:24.199 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 107) no key    
20:17:24.199 CCcam: cam[0] ecm odd nok caid:0x1811 id:0x0 pid:0x1644 Unknown   
20:17:24.297 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 107) no key    
20:17:24.298 CCcam: cam[0] ecm odd nok caid:0x1811 id:0x0 pid:0x1645 Unknown   
20:17:24.320 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 7) no key      
20:17:24.320 CCcam: cam[0] ecm odd nok caid:0x1811 id:0x0 pid:0x1646 Unknown   
20:17:24.346 CCcam: cam[0] ecm odd nok caid:0x500 id:0x43330 pid:0x1a2f Unknown
20:17:24.375 CCcam: cam[0] ecm odd nok caid:0x500 id:0x43300 pid:0x1a2c Unknown
Segmentation fault )

cccam was block and I have     Error reading webpage

I restar cccam and all was working again.

A Segmentation Fault means it crashed, due to a coding error.

Nothing we can do about it, it seams your card isn't entirely compatible with CCcam 2.3.0. Looks like you have EMU keys installed as well, it could be that these conflict with your card.

Perhaps you can try removing your keys file, and if that doesn't work, an older version (de-install this one in the plugins, and install an other one). Alternative you can switch to another Cam.

If you can tell us which card it exactly is, maybe someone with the same card can tell you what they use.

no emu keys  installed, my card is viaccess HRT, and Swiss ,  I try with cccam 2.2.1 , and it was the same.

Thanks for helping  me.

Get rid of that cccam, its knowadays notorious for crashing. Best would be to install oscam instead but the configuration for your cards will take you some time.

However plenty example configs available for you cards.

This looks very familiar, the notorious Viaccess caid that crashes CCcam. There is ENOUGH to be found to fix this.

thanks to everybody, after a good cleaning of all unknown pid's and old cards, for the moment is better, and you are right is time to go back on oscam.
best regards
jackson