Boblight Enigma2 and CPU usage
Aniol 4 Nov 2014
Sorry for my English.
I Ibox Cloud 2 Plus 750MHz processor. I installed boblight-enigma2_0.8r6b. Arduino Uno device I and 144 LEDs WS2811. CPU load of 50% while 30% boblightd boblight-enigma2. Everything comes with a delay, after a moment suspended.
[global]
interface 127.0.0.1
port 19333
[device]
Ambilight name
momo type
output / dev / ttyACM0
432 channels
prefix 41 64 61 00 18 4D
interval 20000
rate 115200
debug off
delayafteropen 100000
what I am doing wrong?
Speedy1985 10 Nov 2014
Sorry for my English.
I Ibox Cloud 2 Plus 750MHz processor. I installed boblight-enigma2_0.8r6b. Arduino Uno device I and 144 LEDs WS2811. CPU load of 50% while 30% boblightd boblight-enigma2. Everything comes with a delay, after a moment suspended.
[global]
interface 127.0.0.1
port 19333
[device]
Ambilight name
momo type
output / dev / ttyACM0
432 channels
prefix 41 64 61 00 18 4D
interval 20000
rate 115200
debug off
delayafteropen 100000
what I am doing wrong?
Hi Aniol,
Boblight for enigma2 is not developed anymore.
I have made alot of changes and changed the name to EnigmaLight. (See attachment for last beta)
Try it and let me know
Install notes:
- First remove Boblight
- Install new EnigmaLight (ipk can install on mipsel and mips32el)
- rename old boblight.conf to enigmalight.conf
- Restart your receiver and try the new plugin
Log Files:
- Turn on debuglogs (GUI logs) in settings for log files in /tmp/enigmalight_gui.log, we can share it here for help
- EnigmaLight program logs are found in /home/root/.enigmalight/enigmalight.log
ChangeLog:
- Added autostart options (off, server, dynamic, moodlamp)
- Fixed some bugs in GUI
- Fixed dm7080
- Fixed Connect from Hyperion or Xbmc
- [Fixed] Fixed update function
- [Fixed] I hope lihtpack is working now, cant test this because i have no lightpack devices.
- [Fixed] Network mode fixed, XBMC now connecting without problems
- [Fixed] Mode change method, when changed from mode grabber was starting one sec before switch to another mode. now change directly to mode
- Added/Fixed RGB Sequence
- Fixed Dreambox 7080HD
- A lot off cleanup
- Box detection works better now in About screen.
- Fixed a memoryleak
- [Fixed] log-function, printing double functions
- [Fixed] lightpack, now connect 2 or more lightpacks
- [Fixed] (Ihad Terror01) EL_Check.py, line 78, Crash fixed
- [Added] Smoothing (Tuning screen)
- Network mode fixed
- Disabled adjust mode for networkmode, because hyperion and default boblight don't have the liveadjust.
- Added new binary files for receivers without FPU support like the DM800 (but without FPU it will be slow)
- Changed log function
- Statusbar bug fixed
- Enigmalight can be used as grabber or moodlamp or server for boblight/hyperion clients
- Its only onefile, so now it use 8-9% cpu @ 1920x1080 with interval @ 0.10 (10fps) and can run on a dualcore with interval 0.01 @ 90fps with 40% cpu, but 90fps is overkill
- Grabber again optimized
- Added statusbar with info (RUNNING or NOT,CPU,FPS,MODE) in GUI and it will be refreshed every sec.
- New effects (rainbow, rgb test, later more...)
- Lightpack support fixed, now you can connect 2 lightpacks or more, see my website http://enigmalight.net for the howto.
- New GUI
- Log function, GUI will make log file in /tmp if you enable this option in settings
- Translations not done yet, first it must be stable
- Added a lot of new code
- Added BRCM7241 (et8000) and BRCM7346 (GigaBlue EU )chipsets
- Select configfile from settings
- Switch from local to networkmode
- And more
Attached Files
Speedy1985 10 Nov 2014
Need to do some last cleanup then I can host it.
Gr Speedy
emdoherty 20 Nov 2014
Hi do you know if there is a step by step guide how to set this up with a lightpack. I'm using a Vu+ duo but the lights dont seem to turn on when using the box I've tested them with my pc and they do. I need to know what add ons etc are needed to be downloaded to my box I'm fairly new to this so please be patient with my lack of knowledge.
Thanks in advance.
nietgiftig 20 Nov 2014
Hi do you know if there is a step by step guide how to set this up with a lightpack.
emdoherty 20 Nov 2014
Yo do realise I've been through all the forums there is no step by step guide telling me what downloads to use I've already hooked it up to my box as all of the boblight/enigmalight forums have sugested but the leds wont light up do I need to install any xbmc add on if so what ones work best
nietgiftig 20 Nov 2014
Yo do realise I've been through all the forums there is no step by step guide telling me what downloads to use
No did not, you did not tell
Also you did not tell what box you are using
And you did not tell what you had been trying.
You do not need any other pluging, just enigmalight.
And put your LED conf configuration in the .conf file
On all those sites you can read how.
emdoherty 20 Nov 2014
ok cheers I'll try it again later with the updated .conf file. Late last night I tryed the boblight addon on my vu+ duo running the latest vix and the lights didn't light up when using the in built configuration tool so was wondering if there was anything I was doing wrong.
emdoherty 20 Nov 2014
One more thing do I need a client running on a pc for the enigmalight addon to connect to? if so what would you recommend? Thanks
nietgiftig 20 Nov 2014
One more thing do I need a client running on a pc for the enigmalight addon to connect to?
No, unless you want something other than enigmalight on your box.
Just an usb connection between the led interface and the box.
emdoherty 20 Nov 2014
Got it working thanks for the help!
Red seems to be shong as yellow though any ideas?
nietgiftig 20 Nov 2014
Red seems to be shong as yellow though any ideas?
Every brand led is different in color,
There is however a very good settings menu, where you can adjust the color the way you like it
Edited by nietgiftig, 20 November 2014 - 20:11.