Springen naar inhoud


Foto

Record one channel - can't watch other channels

Ultimo CCcam

  • Please log in to reply
Er zijn 37 reacties in dit onderwerp

#1 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 16 december 2014 - 09:16

Hi

Problem:
When recording one (coded) channel I can't watch other (coded) channels - only FTA - channels.

Setup:
OpenPli: 4.0
VU+ Ultimo
2 DVB-S tuners
Two cables to tuners
CCcam 2.3.0
CoolTV Guide
No cardsharing
Smartcard: Canal Digital Nordic (Denmark)

Until resently I was able to record several channels and watch others?
Then the VU+ somehow cleared ll settings (!?) and I reinstalled everything again. And the problem began...

When I go into CCcam PPanel - CCcam Smartcard Info, it shows:
card reader /dev/sci0: No or unknown card inserted
card reader /dev/sci1: No or unknown card inserted


Any help greatly appreciated

Regards Kenneth
 



Re: Record one channel - can't watch other channels #2 Erik Slagter

  • PLi® Core member
  • 46951 berichten

+541
Excellent

Geplaatst op 16 december 2014 - 14:40

card reader /dev/sci0: No or unknown card inserted
card reader /dev/sci1: No or unknown card inserted

If CCcam shows this I am surprised you can even watch 1 (encrypted) channel. Looks like card sharing...


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Record one channel - can't watch other channels #3 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 16 december 2014 - 16:19

Hi Erik

 

Nop - no cardsharing. Just tested the card in original Canal Digital box (Sagem) and recording while watcing another channel (both coded) was possible.

 

Rgds. Kenneth



Re: Record one channel - can't watch other channels #4 mimisiku

  • Senior Member
  • 5458 berichten

+114
Excellent

Geplaatst op 16 december 2014 - 17:19

And you are not using a CI module by any chance? As Eric mentioned, if you see the "no, or unknown card detected" in both readers AND you do not use a CI module then it HAS to be cardsharing!!

If you use a CI module it will result in the errors you describe. Your CI can handle only 1 stream! Quick solution: take the card out of the CI module and place it in one of the build in card slots. Remove the CI from the CI slot.. Check if CCCam Info now shows the card.
Met één been in het graf..... Helaas

Re: Record one channel - can't watch other channels #5 Erik Slagter

  • PLi® Core member
  • 46951 berichten

+541
Excellent

Geplaatst op 17 december 2014 - 10:49

Remove the CI AND chuck it into the bin.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Record one channel - can't watch other channels #6 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 17 december 2014 - 11:51

Hi

 

I might not have expressed myself clearly enough :-(

I use the build-in smartcardreader for my (legit) Canal Digital card.

 

Regards Kenneth



Re: Record one channel - can't watch other channels #7 Erik Slagter

  • PLi® Core member
  • 46951 berichten

+541
Excellent

Geplaatst op 17 december 2014 - 14:13

If the card is in the internal smart card reader AND

 

- the card is valid AND

- the card is working AND

- the card is the right way up in the card reader AND

- the card reader is working AND

- CCcam is running

 

THEN the card's entitlements should show up in the entitlements page of CCcam. If there are no entitlements, it is not going to work.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Record one channel - can't watch other channels #8 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 17 december 2014 - 15:29

Hi Erik

 

- the card is valid AND Yes

- the card is working AND Yes

- the card is the right way up in the card reader AND Yes

- the card reader is working AND Yes

- CCcam is running Yes - suppose so since I can access via WebInf

And via WebInf I get the following output when clicking on button Entitlements:

card reader /dev/sci0
no or unknown card inserted

card reader /dev/sci1
no or unknown card inserted

Regards Kenneth




Re: Record one channel - can't watch other channels #9 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 17 december 2014 - 15:54

Hi again

 

Tried to start CCcam in debug - mode:

 

root@vuultimo:/usr/bin# CCcam -d
15:50:49.980 CCcam: ======================================================================
15:50:49.981 CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
15:50:49.981 CCcam: ======================================================================
15:50:49.982 CCcam: online using nodeId 3269c1da589da719
15:50:49.986 CCcam: dvb api3 detected
15:50:49.988 CCcam: DM8000 detected
15:50:49.988 CCcam: create 8 cam device(s)
15:50:50.216 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
15:50:50.216 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
15:50:50.217 CCcam: static cw not found or bad
15:50:50.217 CCcam: parsed 0 entries from /var/etc/CCcam.prio
15:50:50.217 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
15:50:50.218 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
15:50:50.218 CCcam: server started on port 12000
15:50:50.221 CCcam: found conax caid: 0xb00 ecmpid: 0x1b8f id: 0x0
15:50:50.222 CCcam: cam[0] set PMT for sid=25a
15:50:50.223 CCcam: start EMM
15:50:50.231 CCcam: cam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:50.330 CCcam: cam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:50.431 CCcam: cam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:50.605 CCcam: EMM demux 1 set
15:50:50.605 CCcam: EMM: not interested in 0B00:000000
15:50:55.519 CCcam: cam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:55.619 CCcam: cam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:55.718 CCcam: cam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1b8f Unknown

 

Any hints there?

 

Regards Kenneth



Re: Record one channel - can't watch other channels #10 betacentauri

  • PLi® Core member
  • 7185 berichten

+323
Excellent

Geplaatst op 17 december 2014 - 18:58

In some readers you have to put the card with the chip upwards into the reader and in some not. So try to turn around the card.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Record one channel - can't watch other channels #11 janejak

  • Senior Member
  • 284 berichten

+11
Neutral

Geplaatst op 18 december 2014 - 03:59

Hi again

 

Tried to start CCcam in debug - mode:

 

root@vuultimo:/usr/bin# CCcam -d
15:50:49.980 CCcam: ======================================================================
15:50:49.981 CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
15:50:49.981 CCcam: ======================================================================
15:50:49.982 CCcam: online using nodeId 3269c1da589da719
15:50:49.986 CCcam: dvb api3 detected
15:50:49.988 CCcam: DM8000 detected
15:50:49.988 CCcam: create 8 cam device(s)
15:50:50.216 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
15:50:50.216 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
15:50:50.217 CCcam: static cw not found or bad
15:50:50.217 CCcam: parsed 0 entries from /var/etc/CCcam.prio
15:50:50.217 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
15:50:50.218 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
15:50:50.218 CCcam: server started on port 12000
15:50:50.221 CCcam: found conax caid: 0xb00 ecmpid: 0x1b8f id: 0x0
15:50:50.222 CCcam: cam[0] set PMT for sid=25a
15:50:50.223 CCcam: start EMM
15:50:50.231 CCcam: cam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:50.330 CCcam: cam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:50.431 CCcam: cam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:50.605 CCcam: EMM demux 1 set
15:50:50.605 CCcam: EMM: not interested in 0B00:000000
15:50:55.519 CCcam: cam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:55.619 CCcam: cam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1b8f Unknown
15:50:55.718 CCcam: cam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1b8f Unknown

 

Any hints there?

 

Regards Kenneth

it lock ok to me i have Canal Digital Norway card and it lock almost same

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.12.18 03:54:17 =~=~=~=~=~=~=~=~=~=~=~=


satdreamgr-openpli 4 vuduo




vuduo login: root
root@vuduo:~# [6nCCcam -d[J
03:54:23.077 CCcam: ======================================================================
03:54:23.078 CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
03:54:23.079 CCcam: ======================================================================
03:54:23.082 CCcam: online using nodeId b992f365987e95f
03:54:23.094 CCcam: dvb api3 detected
03:54:23.096 CCcam: DM8000 detected
03:54:23.096 CCcam: create 8 cam device(s)
03:54:23.479 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
03:54:23.479 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
03:54:23.479 CCcam: static cw not found or bad
03:54:23.480 CCcam: parsed 0 entries from /var/etc/CCcam.prio
03:54:23.480 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
03:54:23.481 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
03:54:23.481 CCcam: server started on port 12000
03:54:32.116 CCcam: found conax caid: 0xb00 ecmpid: 0x1ba7 id: 0x0
03:54:32.119 CCcam: cam[0] set PMT for sid=40f
03:54:32.129 CCcam: start EMM
03:54:32.229 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:32.280 CCcam: EMM demux 1 set
03:54:32.280 CCcam: EMM: not interested in 0B00:000000
03:54:32.329 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:32.428 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:37.556 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:37.656 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:37.755 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:47.205 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:47.304 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:47.404 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:57.441 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:57.541 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:54:57.640 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:55:07.660 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:55:07.761 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:55:07.860 CCcam: [31;1mcam[0] ecm even nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:55:17.892 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:55:17.993 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
03:55:18.092 CCcam: [31;1mcam[0] ecm odd nok caid:0xb00 id:0x0 pid:0x1ba7 Unknown[0m
^Croot@vuduo:~# [6nexit
 



Re: Record one channel - can't watch other channels #12 janejak

  • Senior Member
  • 284 berichten

+11
Neutral

Geplaatst op 18 december 2014 - 04:03

my entitlements:

card reader /dev/sci0
handled 47(47) ecms and 7(7) emms

Conax card
Caid b00
id   name         date
6010 6010         01.12.14-31.12.14
                  01.11.14-30.11.14 
6020 Nordic 1     01.05.12-31.05.12
                  01.04.12-30.04.12 
6030 Nordic 2     22.04.08-10.05.08
                  01.01.90-01.01.90 
6040 Nordic 3     01.05.12-31.05.12
                  01.04.12-30.04.12 
6050 TSS          22.04.08-10.05.08
                  01.01.90-01.01.90 
6060 6060         01.12.14-31.12.14
                  01.11.14-30.11.14 
6070 Nordic 5     01.11.09-30.11.09
                  01.10.09-31.10.09 
6080 6080         01.12.14-31.12.14
                  01.11.14-30.11.14 
8012 8012         01.12.14-31.12.14
                  01.11.14-30.11.14 
8010 8010         01.12.14-31.12.14
                  01.11.14-30.11.14 
8011 8011         01.12.14-31.12.14
                  01.11.14-30.11.14 
8014 8014         01.12.14-31.12.14
                  01.01.90-01.01.90 


card reader /dev/sci1
no or unknown card inserted


Re: Record one channel - can't watch other channels #13 Erik Slagter

  • PLi® Core member
  • 46951 berichten

+541
Excellent

Geplaatst op 18 december 2014 - 16:48

The debug log from kenneth shows no card is recognised at all and no decryption takes place.

 

The only way I can explain this, is that you're really using a CI/CAM.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Record one channel - can't watch other channels #14 Satpal

  • Senior Member
  • 299 berichten

+4
Neutral

Geplaatst op 18 december 2014 - 16:53

Or the sci-devices are disabled in the CCcam.cfg. But then there must be an entry in there as by default 2 devices are enabled. All this however really isn't related to the image.



Re: Record one channel - can't watch other channels #15 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 19 december 2014 - 14:29

Thanks for our replies, but problem still exists. Strange thing is that it worked flawlessly until 1½ month ago (until reinstalling OpenPli).

And since I can watch coded channels, the card seems to be working, so I'm really at my wits end - might try OSCam!?

 

Regards Kenneth



Re: Record one channel - can't watch other channels #16 mimisiku

  • Senior Member
  • 5458 berichten

+114
Excellent

Geplaatst op 19 december 2014 - 17:18

Perhaps you are suffering from a bad build? The build from 16-12 was bad and caused the internal readers to stop working!! Try to install a version prior to 16-12 and check again...
Met één been in het graf..... Helaas

Re: Record one channel - can't watch other channels #17 kc44

  • Member
  • 9 berichten

0
Neutral

Geplaatst op 20 december 2014 - 12:11

Hi mimisku

 

I'll try that.



Re: Record one channel - can't watch other channels #18 BolleBR

  • Senior Member
  • 55 berichten

+1
Neutral

Geplaatst op 20 december 2014 - 21:26

This has NOTHING to do with your cardreaders etc .. this has all to do with the UPDATE ! I have 4 tuners and when you are indeed recording on 1 channel, no matter WHAT channel, the OTHER TUNERS ALL GO BLACK ! EVEN THE FTA ONES  -> BLACK, NOIR , ...

 

solution -> restore old backup from backup suite and all working fine again.

 

I am actually thinking not to press that update button ever again .. .:)

 

Even removing it myself from the menu , better idea :)

 

So do NOT update if you have multiple tuners

 

Cheers



Re: Record one channel - can't watch other channels #19 WanWizard

  • PLi® Core member
  • 68303 berichten

+1718
Excellent

Geplaatst op 20 december 2014 - 21:55

All VU's need to be flashed due to a kernel update. Updating doesn't work.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Record one channel - can't watch other channels #20 hemertje

  • Forum Moderator
    PLi® Core member
  • 33469 berichten

+118
Excellent

Geplaatst op 20 december 2014 - 22:11

VU+ download links are added to our homepage 

 

http://openpli.org/


on the Glassfibre 1GB DVB-C...




Also tagged with one or more of these keywords: Ultimo, CCcam

1 gebruiker(s) lezen dit onderwerp

0 leden, 1 bezoekers, 0 anonieme gebruikers