I use a Vu+ SOLO and a offset sat dish with a Titanium C1WPLL lnb with conical scalar for off set dish type. But I have no success. There is no signal.
Is it generally possible to take a C-Band lnb with a Vu+Solo and OpenPli?
Micky
C-band and Vu+ SOLO not possible?
Begonnen door: Micky, 28 mrt 2015 10:25
Er zijn 4 reacties in dit onderwerp
#1
-
- Senior Member
- 162 berichten
0
Neutral
Geplaatst op 28 maart 2015 - 10:25
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Re: C-band and Vu+ SOLO not possible? #2
-
- Senior Member
- 162 berichten
0
Neutral
Geplaatst op 29 maart 2015 - 20:41
Nobody does know it?
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Re: C-band and Vu+ SOLO not possible? #3
-
- PLi® Core member
- 56306 berichten
+691
Excellent
Geplaatst op 29 maart 2015 - 20:47
C band should be possible on any enigma2 box.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: C-band and Vu+ SOLO not possible? #4
-
- Senior Member
- 162 berichten
0
Neutral
Geplaatst op 22 april 2015 - 01:13
Ok, works. The reason was a wrong mounted LNB holder. 
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Re: C-band and Vu+ SOLO not possible? #5
-
- PLi® Core member
- 56306 berichten
+691
Excellent
Geplaatst op 22 april 2015 - 10:46
Thanks for the feedback!
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers
