How to read Viasatcard on VU+SOLO2
Idefixer 4 Feb 2016
I have Vu+Solo2 and PLi.
I have downloaded Oscam through Menue on box and configured the files of Oscam.
I have got the box to read a Canaldigital-card, CAID 0B00, in one of the internal readers. No problems!
But when I try to read a Viasatvard, CAID 090F, It does not work.
The log sais following:
(reader) upper_card_Viasat [internal] card detected
(reader) upper_card_Viasat [internal] ATR: 00 00
(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention
(reader) upper_card_Viasat [internal] Error activating card.
(reader) upper_card_Viasat [internal] ATR: 00 00
(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention
(reader) upper_card_Viasat [internal] Error activating card.
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
(reader) upper_card_Viasat [internal] ATR: 00 00
(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention
reader) upper_card_Viasat [internal] Error activating card.
(reader) upper_card_Viasat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
reader) upper_card_Viasat [internal] card initializing error
The Readersection in Oscam.user looks like this:
[reader]
label = upper_card_Viasat
enable = 0
protocol = internal
device = /dev/sci1
caid = 090F
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
dropbadcws = 1
ratelimitecm = 4
ratelimittime = 9000
ecmunique = 1
srvidholdtime = 2000
cooldown = 30,600
I have tried to set both mhz and cardmhz to 357 and also deleted them totally, but no progress.
So either the VU+Solo can't read Viasatcards or I am doing something wrong.
How about a external reader connected to USB.
Should the protocol be "smargo"?
What number has the USB on the front? /dev/ttyUSB0 ?
Do I have to install some driver for the USB-reader?
Blacksimon 4 Feb 2016
Hi Idefixer,
enable = 1 ??
try this:
[reader]
label = upper_card_Viasat
enable = 1
protocol = internal
device = /dev/sci1
caid = 090F
detect = cd
mhz = 600
cardmhz = 500
group = 1
emmcache = 1,3,2
Edited by Blacksimon, 4 February 2016 - 20:02.
Idefixer 4 Feb 2016
Hi Blacksimon.
I will try that.
Have You own experiance from Viasat-cards and Vu+Solo2 ?
I know that dreamboxes has reputation to burn Viasat-cards but I have not heard anything about Vu+Solo2.
Best regards
stefansat 5 Feb 2016
Hi Idefixer,
enable = 1 ??
try this:
[reader]
label = upper_card_Viasat
enable = 1
protocol = internal
device = /dev/sci1
caid = 090Fdetect = cd
mhz = 600
cardmhz = 500
group = 1
emmcache = 1,3,2
By vu+solo2 there is only one speed avbl for internal reader an that's 450.
Just go to website :
http://www.streamboa.../wbb2/index.php
Shure someone can help You there.
Idefixer 5 Feb 2016
OK, Thanks Stefansat.
So regardless what settings in Oscam.server, the internal reader will only use 450 ?
Good to know
Brg
Idefixer
Idefixer 7 Feb 2016
This is what I have got sofare...
Still no picture :-(
Oscam.server
[reader]
label = upper_card_Viasat
enable = 0
protocol = internal
device = /dev/sci1
caid = 090F
detect = cd
mhz = 375
cardmhz = -1
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
dropbadcws = 1
ratelimitecm = 4
ratelimittime = 9000
ecmunique = 1
srvidholdtime = 2000
cooldown = 30,600
Log from Oscam
(main) System name = Linux2
(main) Host name = vusolo2
(main) Release = 3.13.5
(main) Version = #1 SMP Wed Feb 3 22:21:13 CET 2016
(main) Machine = mips
(main) Stb model = dm8000
(main) Stb vumodel = vusolo2
(main) Stb boxtype = vusolo2
(main) creating pidfile /tmp/oscam.pid with pid 6342 couldn't open statistics file: /var/log/oscam/oscamuser.log
(config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
(main) signal handling initialized
(config) 10 provid's loaded
(config) 164 service-id's loaded in 1 ms
(net) monitor: initialized (fd=4, port=988)
(net) newcamd: initialized (fd=5, port=10000)
(net) -> CAID: 0B00 PROVID: 000000, FFFFFF
(reader) upper_card_Viasat [internal] creating thread for device /dev/sci1
(reader) lower_card_CanalDigital [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
(reader) lower_card_CanalDigital [internal] Reader sci internal, detected box type: vusolo2
(stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
(main) waiting for local card init
(reader) upper_card_Viasat [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
(reader) upper_card_Viasat [internal] Reader sci internal, detected box type: vusolo2
(reader) upper_card_Viasat [internal] card detected
(reader) upper_card_Viasat [internal] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
(reader) upper_card_Viasat [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
(reader) upper_card_Viasat [internal] Calculated work ETU is 82.67 us reader mhz = 450
(reader) upper_card_Viasat [internal] Buffers readed 0 bytes total time_us 4796699
(reader) upper_card_Viasat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
(reader) upper_card_Viasat [internal] Card type: VTTV
(reader) upper_card_Viasat [internal] Rom version: 10L9
(reader) upper_card_Viasat [internal] Credit available on card: 0 euro
(reader) upper_card_Viasat [internal] classD0 ins36: returned unknown type=0xF9 - parsing may fail
(reader) upper_card_Viasat [internal] classD0 ins36: returned unknown type=0x03 - parsing may fail
(reader) upper_card_Viasat [internal] FuseByte: 25
(reader) upper_card_Viasat [internal] Region Code: SWE00000
(reader) upper_card_Viasat [internal] Country Code: SWE