Jump to content


Photo

Issue with Vu+ Duo2 with Double Twin tuners

vu+duo2 twin tuners locked issues

  • Please log in to reply
4 replies to this topic

#1 SpliNT

  • Member
  • 10 posts

0
Neutral

Posted 9 July 2016 - 16:23

Hello, i'm losing my mind a little bit over this so some feedback would be awesome.

 

My setup looks like this:
Dish with 2x Quad LNB which are set in fixed positions to two different satellites.
Quad LNB 1: Thor 0.8W
Quad LNB 2: Astra 4.8E

Vu+Duo2 with Open Pli 4 (OpenPLi-4.0-beta-vuduo2-20160701)
Twin tuner (S2) 1 (A + B ) = 2 cables from LNB 1
Twin tuner (S2) 2 (C+D) = 2 cables from LNB 2

Tuner config looks like this:

el5lc6.jpg

 

I have backuped bouquets I'm using.

I've done a manual scan on Tuner A for Thor 0.8W and afterwards a manual scan for Tuner C for Astra 4.8E.

Directly after scanning Tuner C (Astra 4.8E) it looks like this:

 

i1i89e.jpg

 

As you see here, tuner C works and D immediately become unusable.

When I change channel to Tuner A (Thor 0.8W) C & D immediately become unsuable,
as if they're being used.

 

157yq9f.jpg

 

Switching back to the previous channel on LNB2 Astra (4.8E) gives me

 

206br0h.jpg

 

I've tried moving the cables from LNB 2 to Twin Tuner 1 and LNB 1 to Twin Tuner 2

and I got the same results but the opposite, causing A & B to become unusable while C & D on work.

 

I also tried changing one the twin tuners with a brand new one, same thing.

No luck with OpenVix or Blackhole, different versions of softcams.

This used to work fine between 2014 (when I bought it) and 2015.
I'm wondering if it could be bad drivers maybe?

What are your thoughts on this? Any ideas are appreaciated.

Thanks in advance.


Edited by SpliNT, 9 July 2016 - 16:25.


Re: Issue with Vu+ Duo2 with Double Twin tuners #2 janejak

  • Senior Member
  • 284 posts

+11
Neutral

Posted 9 July 2016 - 21:04

Have u checked u downt have on timeshift?



Re: Issue with Vu+ Duo2 with Double Twin tuners #3 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 9 July 2016 - 21:40

Box open on the internet, and now being used in an IPTV share? You can check for active streams via menu - information.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Issue with Vu+ Duo2 with Double Twin tuners #4 SpliNT

  • Member
  • 10 posts

0
Neutral

Posted 9 July 2016 - 22:00

Ah hell.. seems like I've had an german intruder all along. Put on http auth for streaming and now he's gone. Can't believe I didn't think of it....  :angry:

Is there any banlist in openpli for excluding ip's?

 

Changing streamingport as well, thanks for the tip WanWizard. This has been a headache for months..


Edited by SpliNT, 9 July 2016 - 22:05.


Re: Issue with Vu+ Duo2 with Double Twin tuners #5 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 9 July 2016 - 22:07

Nope.

 

NEVER open your box onto the internet. It is not a security device, and it is not designed to be a secure device (everything runs with root access). Changing the port will probably buy you hours, or only minutes. It doesn't solve anything.

 

Make sure your box is behind a NAT router or (preferred) a firewall, and use a VPN to access it.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.




Also tagged with one or more of these keywords: vu+duo2, twin tuners, locked, issues

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users