signals are strong but unable to scan any...
amila4341 4 okt 2016
mimisiku 4 okt 2016
Are you sure the 2 middle entries are correct? I have never seen a satellite using the same frequency for both H and V polarisation...
Veranderd door mimisiku, 4 oktober 2016 - 04:36
amila4341 4 okt 2016
That's a satellite we cannot receive in Europe.. Most tuners end at 45.000 Msym so you are really on the edge... Since others with same Msym rate CAN be locked you might want to check out your LNB and possibly the settings. LOF set OK?
Are you sure the 2 middle entries are correct? I have never seen a satellite using the same frequency for both H and V polarisation...
yes both horizontal and vertical transponders used same frequency
amila4341 4 okt 2016
That's a satellite we cannot receive in Europe.. Most tuners end at 45.000 Msym so you are really on the edge... Since others with same Msym rate CAN be locked you might want to check out your LNB and possibly the settings. LOF set OK?
Are you sure the 2 middle entries are correct? I have never seen a satellite using the same frequency for both H and V polarisation...yes both horizontal and vertical transponders used same frequency
LOF = Universal LNB
amila4341 4 okt 2016
i did some experiment with lamedb.i got lamedb file from my friends vu+ zero which scan all transponders and store all channels and merge with my lamedb.now when i switch to those channels my duo2 couldn't scan ,there is signal but after some little while no data on transponder timeout reading pat appear could you suggest remady
Veranderd door amila4341, 4 oktober 2016 - 06:21
Pr2 5 okt 2016
This is typically the message that you get when you cannot receive properly a given TP (transponder).
If your provider use both V and H on the same frequency I guess the conter polarization of your LNB is really important and needs to be very good (the rotation of the LNB inside its support).
http://www.trackdish...l-rate-details/
But if you google with "VU+ problem with high symbol rate" you will see that it is a well-known issue with VU+ product...
Exemple:
http://www.world-of-...hp/t-50769.html
So OpenPLi is not to blame, report the issue to VU+ and tell us if you get any answer from them, if so you should purchase a "Lotery ticket" because you will be in a very good day.
Pr2
amila4341 5 okt 2016
This is typically the message that you get when you cannot receive properly a given TP (transponder).
If your provider use both V and H on the same frequency I guess the conter polarization of your LNB is really important and needs to be very good (the rotation of the LNB inside its support).
http://www.trackdish...l-rate-details/
But if you google with "VU+ problem with high symbol rate" you will see that it is a well-known issue with VU+ product...
Exemple:
http://www.world-of-...hp/t-50769.html
So OpenPLi is not to blame, report the issue to VU+ and tell us if you get any answer from them, if so you should purchase a "Lotery ticket" because you will be in a very good day.
Pr2
problem is only some transponders is not scanned .but some with high symbol rates is scanned and channels are stored.
i did report it to vu+ several times. but they have not responded to any of the emails
Veranderd door amila4341, 5 oktober 2016 - 12:26
Rob van der Does 5 okt 2016
They never do; even a 'thank you' is asked too much for their (not existing) customer care....I did report it to vu+ several times. but they have not responded to any of the emails
amila4341 6 okt 2016
any tools like dvb snoop?
Pr2 6 okt 2016
Tuner/driver issue for those high value symbol rate, I don't think that you can debug this by yourself.
amila4341 7 okt 2016
Thank you.
amila4341 8 okt 2016
You may be correct. I think that is why vu + is not responding.It can even be a hardware issue.
Huevos 9 okt 2016
@Amila4341, looks like you missed the most important comment in this thread. Your LNB skew is wrong. Everything else is just noise. Vu+ boxes have no problem whatsoever scanning these symbol rates.
Erik Slagter 9 okt 2016
I can't confirm that, I can only receive transponders with up to 30 Ms/s (from this location). Otherwise suggestions welcome
Veranderd door Erik Slagter, 9 oktober 2016 - 09:29
dax 9 okt 2016
I can't confirm that, I can only receive transponders with up to 30 Ms/s (from this location). Otherwise suggestions welcome
Me too. I'm in Europe, if somebody tell to me where find a sat with high symbol rate i can test also. First with a field strenght signal meter and after with a solo2.
amila4341 9 okt 2016
How could it be lnb skew.its not only me facing this issue most of vu + duo2 holders who tried to get st 2 is facing same issue . could you explain please.@Amila4341, looks like you missed the most important comment in this thread. Your LNB skew is wrong. Everything else is just noise. Vu+ boxes have no problem whatsoever scanning these symbol rates.
Veranderd door amila4341, 9 oktober 2016 - 12:54