Jump to content


Photo

USB tuner PCTV 290e (em28xx) problem

PCTV 290e em28xx

  • Please log in to reply
4 replies to this topic

#1 matafakciz

  • Member
  • 8 posts

0
Neutral

Posted 17 February 2017 - 13:31

Hello,
I have USB DVB-T tuner PCTV NanoStick 290e.
It works very well on my my Xtrend et9500 on image from 07 2015.
I downloaded driver dvb-usb-em28xx(1.0-r0.10) from feed, restarted box and tuner works.
It was still working in 06 2016 and then i stop using it.

Now I want to use it again, but it is'nt working. On my both machines, Xtrend et8000 and Formuler F3 the same problem:
I plug the tuner to the USB, download driver dvb-usb-em28xx (1.0-r0.0) from feed - no errors, restart box,
the light on the tuner starts shine, but it isn't visible in tuner configuration in reciever - it is not detected.

Has anybody solution of this problem?
I read the forum, but i didn't found any (understandable) solution.
Thank you!



Re: USB tuner PCTV 290e (em28xx) problem #2 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 17 February 2017 - 20:25

It works well here with Dream Multimedia DM7020hd. I use it every day and updating my Dream as well.

DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: USB tuner PCTV 290e (em28xx) problem #3 n0dder

  • Senior Member
  • 27 posts

+1
Neutral

Posted 17 February 2017 - 22:09

It could be the dependencies aren't all pulled in - could you log into the box and check with dmesg after reboot if it complains about anything - in that case (and only then), you may have luck following this older post #10 - in essence, if you are logged into the box, "opkg install kernel-module-cxd2820r" and "opkg install kernel-module-tda18271" and then a reboot should do. Remember to configure the tuner to the right type/location.


Edited by n0dder, 17 February 2017 - 22:12.

vu+ solo2, Pioneer SC-LX88, Pioneer KRP-500A

1W, 5E, 13E via 4:1 DiSEqC in Tuner A; 19.2E in Tuner B; DVB-T2 via PCTV Nanostick T2 (290e)


Re: USB tuner PCTV 290e (em28xx) problem #4 matafakciz

  • Member
  • 8 posts

0
Neutral

Posted 20 February 2017 - 07:07

Thank you very much for your advice. I checked the box with dmesg, and there were errors:
"DVB: unable to find symbol cxd2820r_attach()"
"em28174 frontend initialization failed"

So first I tried to "opkg install kernel-module-cxd2820r" and then I rebooted box.
The tuner is detected now and working well :-) Thanks


I noticed that in signal status there is not displayed value SNR. Values AGC and BER works.
But thats just detail...



Re: USB tuner PCTV 290e (em28xx) problem #5 matafakciz

  • Member
  • 8 posts

0
Neutral

Posted 23 February 2017 - 08:04

Previous post relates to Xtrend et8000. Now I tried it for Formuler F3 but unsuccessfully. I downloaded driver em28xx from feed, restarted box, instaled kernel-module-cxd2820r, restarted and tuner is still not detected. Then I tried to install kernel-module-tda18271, but there is error that it does not exist (for Formuler).

In dmesg there are errors:

- unable to allocate 0 bytes for transfer buffer 0
- em28174 #0: em28xx_dvb: failed to pre-allocate USB transfer buffers for DVB.

Any tips how to solve it?
Thank you.





Also tagged with one or more of these keywords: PCTV 290e, em28xx

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users