Springen naar inhoud


Foto

remotestreamconvert


  • Please log in to reply
Er zijn 49 reacties in dit onderwerp

#1 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 11 augustus 2017 - 13:20

Hello,
I have two Vu +, one solo² in the room and a 4K in the living room.
I would like to pass my chains from 4K to solo² with extension remotestreamconvert.
I downloaded the extension on the solo².

I put the 4K IP:
Button green ok
Result, "failed downloading of remote services".

With remotestreamcontrol, I have the solo² chains on the 4K.

I would have liked to know, why switching from 4K to solo² does not work, while the reverse is working.

I also tried, the remote tuner folding, putting the 4K ip on the solo², the same channels on both, nothing works.

If you have an idea of the problem, or another effective method, I am a taker.
Thank you.


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #2 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 11 augustus 2017 - 13:44

Is one of the two connected to wifi instead of a wired network? And if so, is there a router setting that prevents wireless to wired communication?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: remotestreamconvert #3 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 11 augustus 2017 - 14:39

On my father house there is a WiFi access point which has its own DHCP server and then provide another IP range to anything connected behind the WiFi.  This is working fine but I cannot access the devices from the wired network the devices connected behind the WiFi access point (because I cannot adapt the routing on the ISP and the bridge mode on the WiFi access point never work properly).

 

So check the IP addresses on both VU+ and check if they are in the same IP range.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: remotestreamconvert #4 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 11 augustus 2017 - 16:17

Is one of the two connected to wifi instead of a wired network? And if so, is there a router setting that prevents wireless to wired communication?

No, they are wired network.
 

 

On my father house there is a WiFi access point which has its own DHCP server and then provide another IP range to anything connected behind the WiFi.  This is working fine but I cannot access the devices from the wired network the devices connected behind the WiFi access point (because I cannot adapt the routing on the ISP and the bridge mode on the WiFi access point never work properly).

 

So check the IP addresses on both VU+ and check if they are in the same IP range.

My IP addresses are 08 and 11.


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #5 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 11 augustus 2017 - 20:33

Are your box IP defined by DHCP or statically defined in the configuration? If manually define check the subnet that you have defined in your setup.

 

Can you ping both box between each other?

 

 

Have you defined a password on the OpenWebif on the 4K box?

 

By the way, you don't need to have a 3rd party plugin, you have a build in function in OpenPLi called Remote server URL


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: remotestreamconvert #6 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 11 augustus 2017 - 20:41

@Pr2.

I guess you mean the fallback tuner instead of 'remote server'?

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: remotestreamconvert #7 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 11 augustus 2017 - 20:53

I think you speak French.
How to ping between solo² and 4K?
With the pc towards both deco, there is no loss, everything works.
Whether it's in DHCP or fixed, nothing changes.
No password.
I activated the remote server with the URL of the 4K, it does not work, with this configuration, the strings must be installed manually?
thanks for your help.

Bonsoir Pr2,
je crois savoir que tu parles Français.
Comment faire un ping entre le solo² et le 4K ?
Avec le pc vers les deux déco, il n'y a aucune perte, tout fonctionne.
L'IP qu'elle soit en DHCP ou fixe, rien ne change.
Pas de mot de passe.
J'ai activé le serveur distant avec l'URL du 4K, ça ne fonctionne pas, avec cette configuration, les chaînes doivent être installées manuellement ?
merci de ton aide.

Veranderd door Frenske, 11 augustus 2017 - 21:09
Good that you added the French translation plus the English original. In this way both the English and French users might be able to help you.

VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #8 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 11 augustus 2017 - 22:38

First connect in telnet to the STB of choice then test the ping command to the other IP.

Then do the opposite.

 

So first you need to connect with telnet, since you are a Windows user you will need first to install it, or use a 3rd party tool that allows you to open a telnet session.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: remotestreamconvert #9 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 11 augustus 2017 - 23:39



First connect in telnet to the STB of choice then test the ping command to the other IP.

Then do the opposite.

 

So first you need to connect with telnet, since you are a Windows user you will need first to install it, or use a 3rd party tool that allows you to open a telnet session.

 

403978101232944210000.jpg

 

606296viberimage.jpg


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #10 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 12 augustus 2017 - 11:24

By doing a network search on Solo², I have the 4K, which means I think the Solo² and the 4K are well connected.

 

En effectuant une recherche de réseau sur Solo², j'ai le 4K, ce qui signifie je crois que le Solo² et le 4K sont bien connectés.

 

755616101923294421C00000000.jpg

 

The 4k, connects well to the Solo², but not the other way around.

Le 4k, se connecte bien au Solo², mais pas l'inverse.

 

4K -> Solo²

969288101923294421C00000000.jpg

 

736762101232944210000.jpg

 

Solo² -> 4K

712306viberimage.jpg

 

658760409701275F40210000.jpg

 

 

I lose my Latin :wub:

Je perds mon latin. :wub: 

 

Thank you for your help and patience. ;)

Merci de votre aide et de votre patience. ;)


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #11 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 12 augustus 2017 - 12:58

Can you connect to the 4K with FTP from your PC?

 

If not, the vsftp daemon isn't working on your box.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: remotestreamconvert #12 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 12 augustus 2017 - 13:47

Can you connect to the 4K with FTP from your PC?

 

Yes, I know how to connect

 

865382101232944210000.jpg


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #13 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 12 augustus 2017 - 13:59

Ok, so you can connect using FTP, you can also access the files on the box (using the FTP button on the left I assume, I don't know DCC)? 


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: remotestreamconvert #14 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 12 augustus 2017 - 14:42



Ok, so you can connect using FTP, you can also access the files on the box (using the FTP button on the left I assume, I don't know DCC)? 

Yes I have access.

 

851614101232944210000.jpg


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #15 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 12 augustus 2017 - 14:44

Hmm... 

 

So: you can ping, ftp works, but the remotestreamconverter can't connect? I am clueless at the moment... :(


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: remotestreamconvert #16 Pr2

  • PLi® Contributor
  • 6046 berichten

+256
Excellent

Geplaatst op 13 augustus 2017 - 12:24

The difference is the ARCH type, the 4K is ARM while the other one is Mipsel.

Does Remotestreamconverter works properly on ARM?


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: remotestreamconvert #17 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 13 augustus 2017 - 12:31

I happened to install remotestreamconverter on an H7 which showed some errors during the installation but RSC appeared to work anyway. Just for a short test I checked it.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: remotestreamconvert #18 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 14 augustus 2017 - 12:22

The difference is the ARCH type, the 4K is ARM while the other one is Mipsel.

Does Remotestreamconverter works properly on ARM?

Yes, it works, I put the image more 4K-> Solo² up.

 

Strange thing, I can read movies that are on the 4K hard drive


Veranderd door lynyrd, 14 augustus 2017 - 12:25

VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #19 lynyrd

  • Senior Member
  • 64 berichten

0
Neutral

Geplaatst op 14 augustus 2017 - 13:02

Strange thing, I can read movies that are on the 4K hard drive !

 

771083101923294421C00000000.jpg


VU+ Solo 4K
Image: OPENPLI 9.0

===================

Zgemma 9H Combo

openpli-develop-h9combo-20220401
 


Re: remotestreamconvert #20 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 14 augustus 2017 - 18:18

What is strange about this feature if you have mounted the harddisk of the Ultimo 4K to any other box?

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.



1 gebruiker(s) lezen dit onderwerp

0 leden, 1 bezoekers, 0 anonieme gebruikers