Is there any news about Quad PIP for Vu +uno 4k with OpenPli 6.1?
Geplaatst op 29 november 2017 - 19:16
I know quadpip works on the uno4kse, so I think there is a great chance it will also work on the uno4k (which has the same SoC).
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Geplaatst op 30 november 2017 - 19:08
Quad PIP is good and now the time is for Fast Channel Change.
Ah, that's nice! A volunteer to implement it! When will you start?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Geplaatst op 30 november 2017 - 19:24
Step 1, fetch the source of VU+ "dvbapp" (which is their version of enigma). They have the FCC code in it. Step 2, find the relevant commits where they added the code. Step 3, compare that the source of enigma2 (which is not really the same as dvbapp) and decide how to implement that into enigma2, in a good (!) way. There is 0 documentation available. Good luck!
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Geplaatst op 30 november 2017 - 19:52
Veranderd door littlesat, 30 november 2017 - 20:00
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Geplaatst op 30 november 2017 - 20:07
But then apparently you don't have a rate limited subscription card. And also little clue how much work it is to implement it.
Veranderd door Erik Slagter, 30 november 2017 - 20:51
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Geplaatst op 1 december 2017 - 11:26
When I tried FCC, I realy enjoyed it.
It was good not only for fta but for all channels.
I've heard the same from many users.
But then apparently you don't have a rate limited subscription card.
AFAIK only the Dutch/Belgium cards have this issue. And the PLi-audience is really much broader than those two small countries.
And also little clue how much work it is to implement it.
That's a different story.
VU has a famous track-record of implementing stuff in E2 (including working around driver bugs) that only works/is needed for VU
Geplaatst op 1 december 2017 - 11:57
[sorry somehow quote did not work]
I've heard the same from many users.
->
But what will it really bring these many users?
AFAIK only the Dutch/Belgium cards have this issue. And the PLi-audience is really much broader than those two small countries.
->
In most countries they start mandatory need of a CI(+) module... which even more limeted. And there are inbetween more providers 'having' this...All thanks to the 'professional' card servers...
That's a different story.
VU has a famous track-record of implementing stuff in E2 (including working around driver bugs) that only works/is needed for VU
->
The patch from VU is in this case huge. It also arranges access to the setting list on a 'wierd' matter. When accepted it needs a complete overwrite... In addition it always occupied x-tuners also when you watch TV in a normal matter. Actually you always tune and decode e.g. 4 channels at once. This is extra power consumption. There is no kind of 'timeout' implemented yet that stops FCC when it is not really needed. For SAT you also need JESS or Unicable. Without it the FCC is already limited. For cable (or DVB-T) it might be fine... when you are a quick zapper.... For now I stop defending that I do not want to put my energy into this feature...
And of course when someone creates a good smooth clear and structured merge request it can be accepted... OpenPLi is open source.... So someone can go-ahead and always asked us how it can/should be made....
Veranderd door littlesat, 1 december 2017 - 12:02
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Geplaatst op 1 december 2017 - 13:43
Hi,
The limitation is not exclusive to the countries you mention, the limitation is also applicable in France (will you also call it a small country?).
And this limitation is now embedded in any modern smartcard (Nagra, Viaccess I am sure this is implemented) operators are swapping the smartcards to enable those ECM limitations.
By the way, I really wonder what benefits you will have with the milli-seconds that you will "win" by having FCC implemented. Will this really change your life to get the image a few msec faster?
FCC is just a commercial term for a useless feature.
Pr2
Veranderd door Pr2, 1 december 2017 - 13:45
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Geplaatst op 1 december 2017 - 15:30
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Geplaatst op 1 december 2017 - 16:53
Applause you can count
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
0 leden, 1 bezoekers, 0 anonieme gebruikers