Jump to content


Photo

V+ Ultimo 4K installatie procedure niet in Wiki

Installatie

  • Please log in to reply
12 replies to this topic

#1 peterv

  • Member
  • 11 posts

+1
Neutral

Posted 2 March 2018 - 11:48

Na veel jaren met mijn DM7020HD ben ik nu de eigenaar van de VU+ Ultimo 4k vanwege defecten in de oude box. Graag wil ik weer naar OpenPli maar zag dat de procedure niet in de Wiki staat. Ik verwacht dat het mogelijk gelijk is met een andere VU+ box is. Graag advies.

Op dit moment is de beeldkwaliteit ‘iets’ minder dan de 7020HD. Klopt het dat OpenPli daar mogelijk beter is?

Gr. Piet

Re: V+ Ultimo 4K installatie procedure niet in Wiki #2 Zuppelan

  • Senior Member
  • 1,408 posts

+62
Good

Posted 2 March 2018 - 12:21

Over beeldkwaliteit is het lastig uitspraken te doen. Het is vooral een kwestie van instellingen en een image kan hooguit andere standaardinstellingen aanbieden. In beginsel is de installatieprocedure bij iedere Vu+ het gedownloade bestand op een een USB-pook uit te pakken, deze de Vu+ te voeren en het apparaat dan een koude start te geven. Sommige apparaten beginnen dan direct te installeren, sommigen vragen dan op het schermpje of je op een knop wilt drukken als je het proces wilt beginnen.

Re: V+ Ultimo 4K installatie procedure niet in Wiki #3 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 2 March 2018 - 12:52

  • Format your USB stick with a FAT32 file system
  • Download the USB image of your choice on https://openpli.org/...lus/Ultimo 4K  
  • Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory vuplus and in this directory you find a directory zero in which you find the necessary files.
  • Switch off Vu + STB (into the Deepstandby)
  • Remove all USB devices from the box
  • Connect the USB stick at the front or the back
  • Turn on Vu+ STB
  • As soon as the Ultimo 4K starts up, the message "Update!" Appears on the LCD display. Press Power displayed
  • Press the "Power button" (touch button on the front, several times with the finger over the line) within 5 sec. This starts the flash process.
  • After flashing comes the message "Flash Complete"
  • Pull out the USB stick and switch off the power switch
  • Turn on the power switch and start up

Als dit  goed werkt graag even bevestigen dan gaat het in de WIKI...


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: V+ Ultimo 4K installatie procedure niet in Wiki #4 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,380 posts

+393
Excellent

Posted 2 March 2018 - 17:04

In regel 3 staat Zero terwijl de vraag over een Ultimo 4k gaat. Even aanpassen voor de WIKI. Ik ga ervan uit dat jij hooguit voor de Zero / Zero 4K een iets aangepaste hebt. Die is namelijk forced dus gaat gelijk flashen, wat je kunt zien aan het knipperende ledje (zero) of knipperende logo (zero 4K).
Hetzelfde voor de 5e regel Daar staat Zer. ;)

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: V+ Ultimo 4K installatie procedure niet in Wiki #5 luisteraar

  • Senior Member
  • 2,479 posts

+24
Neutral

Posted 2 March 2018 - 17:17

evt erbij zetten na uitschakelen x seconden wachten voordat nieuw ingeschakeld wordt om zeker te

zijn dat intern in de box alles uit is (de tijd om de condensatoren  te ontladen)



Re: V+ Ultimo 4K installatie procedure niet in Wiki #6 Tech

  • Forum Moderator
    PLi® Core member
  • 14,598 posts

+458
Excellent

Posted 2 March 2018 - 17:40

Ik heb de tekst nog wat aangepast, er werd tweemaal de instructie gegeven om de USB stick aan de voor- of achterzijde van het apparaat te steken en moesten alle USB devices er maar liefst driemaal uit om vervolgens de stick er weer in te stoppen.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

 

On the edge of the abyss, a step forward is not always progress....


Re: V+ Ultimo 4K installatie procedure niet in Wiki #7 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 2 March 2018 - 17:41

@TS zoek even op "beeldkwaliteit" met de zoekfunctie. Daar is al het een en ander over gezegd, hoeft niet zo nodig weer allemaal opgerakeld te worden.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: V+ Ultimo 4K installatie procedure niet in Wiki #8 peterv

  • Member
  • 11 posts

+1
Neutral

Posted 2 March 2018 - 21:08

Perfect! Ga de procedure dit weekend uitvoeren!

Re: V+ Ultimo 4K installatie procedure niet in Wiki #9 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 3 March 2018 - 11:14

In regel 3 staat Zero terwijl de vraag over een Ultimo 4k gaat. Even aanpassen voor de WIKI. Ik ga ervan uit dat jij hooguit voor de Zero / Zero 4K een iets aangepaste hebt. Die is namelijk forced dus gaat gelijk flashen, wat je kunt zien aan het knipperende ledje (zero) of knipperende logo (zero 4K).
Hetzelfde voor de 5e regel Daar staat Zer. ;)

Dank had ik gemist, een paar regels waren cut-copy-paste van de Zero, uit de reeds aanwezig info in de WIKI. De rest moet volgens mij werken. @peterv laat even weten of het heeft gewerkt, zoniet graag met commentaar.


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: V+ Ultimo 4K installatie procedure niet in Wiki #10 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 3 March 2018 - 11:15

Ik heb de tekst nog wat aangepast, er werd tweemaal de instructie gegeven om de USB stick aan de voor- of achterzijde van het apparaat te steken en moesten alle USB devices er maar liefst driemaal uit om vervolgens de stick er weer in te stoppen.

Dank


Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: V+ Ultimo 4K installatie procedure niet in Wiki #11 peterv

  • Member
  • 11 posts

+1
Neutral

Posted 3 March 2018 - 12:56


[ mijn correcties]

Format your USB stick with a FAT32 file system
Download the USB image of your choice on https://openpli.org/...lus/Ultimo 4K
Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory vuplus and in this directory you find a directory zero [ultimo4k] in which you find the necessary files.
Switch off Vu + STB (into the Deepstandby)
Remove all USB devices from the box
Connect the USB stick at the front or the back
Turn on Vu+ STB
As soon as the Ultimo 4K starts up, the message "Update!" Appears on the LCD display. Press Power displayed
Press the "Power button" (touch button on the front, several times with the finger over the line) within 5 sec. This starts the flash process.
After flashing comes the message "Flash Complete" [ rebooting in xx secondes]
Pull out the USB stick and switch off the power switch [ Pull out the USB while rebooting is counting down around count 5]
Turn on the power switch and start up[ this line is redundant, can be removed]

Alles werkt perfect, blij weer OpenPLI te hebben....

Gr. Piet
Als dit goed werkt graag even bevestigen dan gaat het in de WIKI...

Re: V+ Ultimo 4K installatie procedure niet in Wiki #12 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 3 March 2018 - 13:56

[ mijn correcties]

Format your USB stick with a FAT32 file system
Download the USB image of your choice on https://openpli.org/...lus/Ultimo 4K
Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory vuplus and in this directory you find a directory zero [ultimo4k] in which you find the necessary files.
Switch off Vu + STB (into the Deepstandby)
Remove all USB devices from the box
Connect the USB stick at the front or the back
Turn on Vu+ STB
As soon as the Ultimo 4K starts up, the message "Update!" Appears on the LCD display. Press Power displayed
Press the "Power button" (touch button on the front, several times with the finger over the line) within 5 sec. This starts the flash process.
After flashing comes the message "Flash Complete" [ rebooting in xx secondes]
Pull out the USB stick and switch off the power switch [ Pull out the USB while rebooting is counting down around count 5]
Turn on the power switch and start up[ this line is redundant, can be removed]

Alles werkt perfect, blij weer OpenPLI te hebben....

Gr. Piet
Als dit goed werkt graag even bevestigen dan gaat het in de WIKI...

Mooi, dat het is gelukt en dank voor de terugkoppeling gaat deze in de WIKI.


Edited by 40H3X, 3 March 2018 - 13:56.

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: V+ Ultimo 4K installatie procedure niet in Wiki #13 peterv

  • Member
  • 11 posts

+1
Neutral

Posted 3 March 2018 - 14:15

Over beeldkwaliteit is het lastig uitspraken te doen. Het is vooral een kwestie van instellingen en een image kan hooguit andere standaardinstellingen aanbieden. In beginsel is de installatieprocedure bij iedere Vu+ het gedownloade bestand op een een USB-pook uit te pakken, deze de Vu+ te voeren en het apparaat dan een koude start te geven. Sommige apparaten beginnen dan direct te installeren, sommigen vragen dan op het schermpje of je op een knop wilt drukken als je het proces wilt beginnen.


Beeld is met OpenPLI weer perfect!



Also tagged with one or more of these keywords: Installatie

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users