Was hat PLI geändert, das Audio nun auf 3. und 4. Channel funktioniert?
Vu+ 4K QuadPiP
Re: Vu+ 4K QuadPiP #2
Re: Vu+ 4K QuadPiP #3
Geplaatst op 25 mei 2018 - 14:13
Ich muss wohl doch mal updaten von 6.1 auf 6.2. Aktuell hindern mich aber dauernd auftretende Wartungsarbeiten unseres Hauses daran
Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX
Re: Vu+ 4K QuadPiP #4
Re: Vu+ 4K QuadPiP #5
Geplaatst op 25 mei 2018 - 14:23
If it is E2 related it might be this one...
https://github.com/O...0e542f3d05546c3
And if so... then also OE-A could fix it...
Veranderd door littlesat, 25 mei 2018 - 14:25
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Vu+ 4K QuadPiP #6
Re: Vu+ 4K QuadPiP #7
Re: Vu+ 4K QuadPiP #8
Geplaatst op 27 mei 2018 - 09:32
If it is E2 related it might be this one...
https://github.com/O...0e542f3d05546c3
And if so... then also OE-A could fix it...
thx littlesat, genau da war das Problem.
Re: Vu+ 4K QuadPiP #9
Re: Vu+ 4K QuadPiP #10
Re: Vu+ 4K QuadPiP #11
Geplaatst op 27 mei 2018 - 10:48
Start E2 via console... watch quadpip... Press CTRL+C in console... Restart E2 in console... watch quadpip again and the bottom two quadrants are black... Zap in quadpip... Fine again...
or we need to 'reset' all four slots at boot... or there is something in the drivers...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Vu+ 4K QuadPiP #12
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers