Posted 7 June 2018 - 18:24
Hi I have issue with my 2 boxes zgemma h5.2s , tuner B not working is set to one satellite simple ,when recording cant watch other channel so in settings turn off tuner A and on tuner B just keep getting info tuning field tuner B is Si2167 is that missing driver ?
Cabling working 100%
Please help
Thank you
Posted 7 June 2018 - 18:55
Separate cables connected to both tuners? Tuners not configured as looped-through? Are channel names greyed-out when you hve a recording active?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 June 2018 - 20:50
Tuners configured to MODE: simple single satellite , when I noticed that can't record I disable tuner A and left just tuner B configured , check both cables unfortunately no signal.
Posted 7 June 2018 - 21:11
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 7 June 2018 - 21:23
No it is not a driver issue I think that it is a configuration problem.
@leon100,
Please describe your antenna, LNB and cable that come to your STB. So don't describe what you have setup in your configuration but you have physically installed.
How many LNBs do you have on your antenna?
How many exit have you on each LNB?
Do you have a DiseqC?
Do you use a motor?
How many cable are coming from the antenna/LNBs/DiseqC to your Zgemma?
Based on this we can help you to properly configure your tuner and explain you the limitation of your setup.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 7 June 2018 - 21:47
Hi I have simple installation twin lnb all outputs on end of cables tested (I'm semi professional satellite installer)
Posted 7 June 2018 - 23:10
Ok i think zgemma H5.2s series with Si2167 B tuner have some issue with scanning working on some frequencies :
Twin LNB , 2 cables connected directly to zgemma cables changed(swapped) during test same symptoms on both: Satellite installation check and confirmed working correctly on 2 different satellite meter (HORIZON, DR 1000)
1) when scan tuner A box founding 913 channels
2) when scan tuner B box founding only 1983
(scanned sattellite is Hot Bird 13E)
Conclusion:
I have 3x zgemma h5.2s with same symptoms TUNER B Si2167 defective wont work on some frequencies tested on OpenPLi 4
Please if anybody own this box please check this issue
Posted 7 June 2018 - 23:53
Hi me again
I did few tests Issue exist on newest:
OpenPLi 4 and OpenPLi 6.2
Tested on OPEN ATV Tuner working correctly all frequencies working issue not exist
So conclusion is there is some bug in OpenPLi image for ZGEMMA H5.2S that cause TUNER B Si2167 working incorrectly.
Please if somebody can check this please and fix if is possible.
Thank you.
Leszek
Posted 8 June 2018 - 09:02
Thanks for your test and report, so you confirm that the bug is still present in OpenPLi 6.2 (OpenPLi 4 is no longer maintained, so please focus your test and bug report on 6.2).
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 8 June 2018 - 10:00
Hi
Yes I can confirm that unit was tested on OpenPli 4 and OpenPli 6.2 with same results tuner B fail on both versions
Fault confirmed on three boxes.
Sent from my SM-G955F using Tapatalk
Edited by leon100, 8 June 2018 - 10:02.
Posted 8 June 2018 - 22:21
Hi there is a chance to fix this issue in next OpenPLi release ? or there is something that I can change, edit to fix this issue.
Please replay.
Thank you
Posted 11 June 2018 - 19:54
Ok I can see I been ignored, just wondering why ? I fought forum is for asking questions and helping develop team to find the bugs etc.
Newest release doesn't fix issue with Si2167 B tuner on zgemma H5.2S having no signal on half of transponders (confirmed software issue problem not exist on different images)
Thanks
Posted 11 June 2018 - 20:03
We are all hobbyist here spending time on forum on our free personal (familly) time.
So please learn a bit of patience for a skilled team developper to read this thread and have a look at it.
I will create a ticket for this issue so it is not forgotten.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 June 2018 - 20:10
...
1) when scan tuner A box founding 913 channels
2) when scan tuner B box founding only 1983
(scanned sattellite is Hot Bird 13E)
Conclusion:
I have 3x zgemma h5.2s with same symptoms TUNER B Si2167 defective wont work on some frequencies tested on OpenPLi 4
Please if anybody own this box please check this issue
Please clarify this point, you complaint about a problem on Tuner B but in your exemple Tuner B founds more channels than Tuner A.
So there is something wrong in your bug report.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 June 2018 - 20:18
That's error in my message for some reason can't edit this post, correct version is:
1) when scan tuner A box founding 1983 channels
2) when scan tuner B box founding only 913
Thank you
Edited by leon100, 11 June 2018 - 20:18.
Posted 11 June 2018 - 20:22
Do you know which quadrant(s) is/are missing?
Vertical High / Vertical Low / Horizontal High / Horizontal Low
Or can you give us a few sample of missing TP (or channels) on Hotbird with the scan on tuner B?
If not please provide a lamedb scanned from tuner A (with delete before scan) so with the 1983 channels and also the lamedb scanned from tuner B (with delete before scan) so with only the 913 channels, so we can check which TPs / Quadrant are missing.
Thanks for your help.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 June 2018 - 20:39
The OE-Alliance images and OpenPLi 6.2-release contain the same drivers for the H5, so that can't be it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 June 2018 - 20:40
Indeed I don't think that it is a driver bug, so problem is elsewhere...
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 June 2018 - 20:45
Please help me with localising lamedb file
Thanks
Ok I try this
When i go to service searching then signal finder:
TUNER A
satellite 13E
TUNE
Edited by leon100, 11 June 2018 - 20:48.
Posted 11 June 2018 - 21:21
Edited by leon100, 11 June 2018 - 21:22.
0 members, 1 guests, 0 anonymous users
