Hello, i have a problem.
On my Ultimo4k does not work cloning TV on LCD. For Solo4k working correctly. Is this a software or hardware fault ?. I checked on openPLI and PKT firmware.
I will be grateful for any help
Ultimo4k TV cloning
Started by gobo, 05 Jul 2018 08:19
8 replies to this topic
Re: Ultimo4k TV cloning #2
-
- PLi® Core member
- 56,258 posts
+691
Excellent
Posted 5 July 2018 - 10:36
Since the latest drivers there is an issue... They added PIP on the LCD... and since they added it the normal TV tot the LCD does not work anymore... (due to a driver 'issue'). As far I know this is already forwarded to VU+ so we expect this issue will be solved in a next driver release.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Ultimo4k TV cloning #3
-
- PLi® Core member
- 46,951 posts
+541
Excellent
Posted 6 July 2018 - 08:58
It is not an "issue", it's a design choice. So it won't get "solved".
Either choose PiP on TV (default) and the second video decoder's output will go there. Or long press the "TV" button and the second video decoder's output will go to the LCD.
So everything is still possible. Having both PiP on TV and LCD active at the same time wasn't possible anyway.
Edited by Erik Slagter, 6 July 2018 - 09:06.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Ultimo4k TV cloning #4
-
- PLi® Core member
- 56,258 posts
+691
Excellent
Posted 6 July 2018 - 11:47
Wierd design choice as it limits the feature and I also think there is totally no need for that!
This does also require a kind of if VU then do something else 'patch' in E2 
as you now can toggle the display also when you have live TV, which should be blocked... All boxes that do offer TV on display offer live TV on display... ...
I'm still afraid this is an unintended side effect with the idea 'VU' had here....
Having both PiP on TV and LCD active at the same time wasn't possible anyway.
When this is not possible they should simply 'swap' the display from live to PIP once you activate PIP...
Edited by littlesat, 6 July 2018 - 11:47.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Ultimo4k TV cloning #5
-
- Senior Member
- 444 posts
+15
Neutral
Posted 6 July 2018 - 16:54
You can even run the Giga 4K with quadpip and TV on LCD, so its a Vu issue
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Re: Ultimo4k TV cloning #6
-
- Senior Member
- 444 posts
+15
Neutral
Posted 6 July 2018 - 17:05
Clarification - you can run Pip and TV on LCD with Giga4K ... with quadpip it basically just says quadpip enabled screens ... but no screens.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Re: Ultimo4k TV cloning #7
-
- PLi® Core member
- 56,258 posts
+691
Excellent
Posted 6 July 2018 - 17:19
Yep... GB does both...
And on VU the procs are still there that should be show normal TV on the LCD...
Edited by littlesat, 6 July 2018 - 17:20.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Ultimo4k TV cloning #8
-
- PLi® Core member
- 46,951 posts
+541
Excellent
Posted 7 July 2018 - 08:34
Wierd design choice as it limits the feature and I also think there is totally no need for that!
This does also require a kind of if VU then do something else 'patch' in E2
I'm still afraid this is an unintended side effect with the idea 'VU' had here....
Having both PiP on TV and LCD active at the same time wasn't possible anyway.
When this is not possible they should simply 'swap' the display from live to PIP once you activate PIP...
No, it just works, try it.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Ultimo4k TV cloning #9
-
- PLi® Core member
- 46,951 posts
+541
Excellent
Posted 7 July 2018 - 08:36
Yep... GB does both...
And on VU the procs are still there that should be show normal TV on the LCD...
The GB solution is less than useful, because you CAN select to have the PiP decoder output on the LCD BUT it won't be scaled to the full size of the LCD, it's just as small as it is would be on TV. Not really useful.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
