Looking for beacon frequencies for semi au...
Frenske 31 Oct 2018
For a friend of mine which owes a Zen-rad multisat half automatic mobile dish I am looking for all beacontransponders for Astra 19,2, Astra 23.5, Astra 28.2, HB 13.0, and Eutelsat 9 east. This is a semi automatic system with maximum of 8 satellites.
I have found some info but I doubt if the data for Eutelsat 9 east is as it should be. I can’t test it as the positioner is at my place for updating the data but the mobile-home isn’t.
Anyone on our board that might supply me with the right data?
I have found some info but I doubt if the data for Eutelsat 9 east is as it should be. I can’t test it as the positioner is at my place for updating the data but the mobile-home isn’t.
Anyone on our board that might supply me with the right data?
S // stop parabole juste pour initialiser le dialogue au cas où S // stop parabole juste pour initialiser le dialogue au cas où zenrad67$ // ------ SAT1 ------- NAME_SAT1=AB 5.0WW F_SAT1=10972 SR_SAT1=29950 POL_SAT1=V DVBS_SAT1=2 // ------ SAT2 ------- NAME_SAT2=ASTRA 19 F_SAT2=11288 SR_SAT2=22000 POL_SAT2=V DVBS_SAT2=1 // ------ SAT3 ------- NAME_SAT3=H.BIRD13 F_SAT3=10992 SR_SAT3=27500 POL_SAT3=V DVBS_SAT3=1 // ------ SAT4 ------- NAME_SAT4=ASTRA 28 F_SAT4=11264 SR_SAT4=27500 POL_SAT4=V DVBS_SAT4=1 // ------ SAT5 ------- NAME_SAT5=EUTELSAT F_SAT5=11996 SR_SAT5=27500 POL_SAT5=V DVBS_SAT5=1 // ------ SAT6 ------- NAME_SAT6=ASTRA 23 F_SAT6=11876 SR_SAT6=29900 POL_SAT6=H DVBS_SAT6=1 // ------ SAT7 ------- NAME_SAT7=SIRIUS4E F_SAT7=11919 SR_SAT7=27500 POL_SAT7=V DVBS_SAT7=1 // ------ SAT8 ------- NAME_SAT8=THOR0,8W F_SAT8=12418 SR_SAT8=28000 POL_SAT8=V DVBS_SAT8=1 AUTO_STOP=1 CT_V_MIN=550 CT_V_MAX=830 V_STEP=10 V_RECT=60 H_RECT=35 H_RECTX=5 MODE_DEMO=0 INERTIE=0 SYNC_FILTER=50 SPEED_STOPPED=1 SPEED_MIN=2 OVER_I_TIMER0=50 OVER_I_INHIBIT_TIMER0=50 BAT_MIN=9000 BAT_MAX1=12000 BAT_MAX2=13700 SPEED_DVBS=6 SPEED_DVBS2=5 ONESAT=6 BOUTONS_MODE=2 SINIT=700 RESET
WanWizard 31 Oct 2018
What is a "beacon transponder"?
Are you looking for a stable transponder that can be used to autodetect the correct sat position, like we do in the image? We use these parameters in the image...
Frenske 31 Oct 2018
I am told I should use a frequency of one specific transponder of Eutelsat 9 that is not used by any other satellite.
In the data I provided earlier most used satellites should be ok but I have changed Hispasat for Eutelsat 9E but if that transponder is also present on any other satellite it won’t work.
Until now I didn’t receive very much helpfull support from the manufacturer. Instead of supplying the needed data he only writes what I should look for.
In the data I provided earlier most used satellites should be ok but I have changed Hispasat for Eutelsat 9E but if that transponder is also present on any other satellite it won’t work.
Until now I didn’t receive very much helpfull support from the manufacturer. Instead of supplying the needed data he only writes what I should look for.
littlesat 31 Oct 2018
In the table given above there is no real beacon frequency... only just a dvb transponder...
WanWizard 1 Nov 2018
What else is a transponder?
The table contains a frequency, symbol rate, polatisation, and a DBVS flag which I don't know what is is (perhaps S vs S2?).
Maybe a tip:
Excel can import XML into a table. So you should be able to import a satellites.xml, and compare the transponder frequencies to find a unique one?