Er zijn 7 reacties in dit onderwerp

[mrvica]

sometimes you want to freeze the picture to write down some important informations off the TV screen (i.e. telephone number, address...), this tool could be something for you, it installs /usr/bin/freeze and /usr/script/!freeze.sh, it is not a python plugin, after installing it and restarting enigma you´ll have to assign a hotkey to it, you´ll find it in shellscripts (!freeze.sh), pressing the hotkey it freezes the picture (the sound is still present) and pressing the hotkey again releases the picture, I´ve tested it on a mipsel box, I compiled for an armhf too, I don´t have an armhf box so I can´t test it, in freeze.zip there is a source too, it is based on test_av.c from tuxbox tools

 

Bijgevoegde Bestanden

•  freeze.zip   8,29K   11 Aantal bijlagen
•  enigma2-plugin-extensions-freeze-picture_0.1_armhf.ipk   2,41K   8 Aantal bijlagen
•  enigma2-plugin-extensions-freeze-picture_0.1_mips32el.ipk   2,86K   10 Aantal bijlagen

[littlesat]

Why is this needed... you also can press the pause button? (Timeshift)

Veranderd door littlesat, 16 november 2018 - 12:49

[ColinB]

sometimes you want to freeze the picture to write down some important informations off the TV screen (i.e. telephone number, address...), this tool could be something for you, it installs /usr/bin/freeze and /usr/script/!freeze.sh, it is not a python plugin, after installing it and restarting enigma you´ll have to assign a hotkey to it, you´ll find it in shellscripts (!freeze.sh), pressing the hotkey it freezes the picture (the sound is still present) and pressing the hotkey again releases the picture, I´ve tested it on a mipsel box, I compiled for an armhf too, I don´t have an armhf box so I can´t test it, in freeze.zip there is a source too, it is based on test_av.c from tuxbox tools

I was just reading your reply to another timeshift (with NO storage) question.

 

So its basicaly just a screenshot but not saved, just displayed on your screen ?

 

Or Pause Picture, to be more acurate ?

Veranderd door ColinB, 3 maart 2019 - 15:50

[mrvica]

it does just freezing or releasing the picture, not grabing the picture to a file, for making screen shots use shootyourscreen plugin

[ColinB]

Yup. Cool.

 

I can see where it would be usefull in specific situations.

 

Like littlesat said, I do think, most people with older stb's by now would have at least small USB for picon, epg  & timeshift.

 

Newer users should also think about storage thats not included with their stb.

 

Perhaps reading Forum Wiki's ?

[carolinea]

Thanks for all your help boys but I still can't pause live tv,I have a 12 gb USB pen in the back but it won't pause to it,if the front door bell goes and I have to answer it I miss usually the end of the TV show or movie,any walk through would be heaven if someone could help me out,the zgemma box has always been great running IPTV and this is the last problem I need sorted as I found out the recall channel button and the last 20 chanels selected button too,it's just pausing the tv for a few minutes that's eluding me,thanks awfully for all your help so far.

[WanWizard]

Have you set the timeshift path in the config, to point to thet USB pen?

[ColinB]

Menu / Setup / Sytstem / Expert Settings / Recording Paths

Press> Timeshift Location

 TS-01.jpg   65,36K   1 Aantal bijlagen

 TS-02.jpg   67,71K   1 Aantal bijlagen

Press Menu and select "Switch to Filelist"

 

 TS-03.jpg   52,21K   1 Aantal bijlagen
 TS-04.jpg   67,15K   1 Aantal bijlagen

Keep pressing <Parent Directory? until you arrive at your storage locations

 TS-05.jpg   70,22K   1 Aantal bijlagen

Then select a starage location. Even better make a folder named Timeshift where you want it to saved.