Geplaatst op 3 februari 2019 - 11:34
Hatte bis jetzt an einer ET9x00 einen DVB-T Stick (Treiber irgendwas mit dib700) in Betrieb.
Wenn ich diesen Stick an einer HD51 anstecke so läuft er auch.(gleiche Einstellungen wie an der ET)
Aber mit Stick gibt es keinen Satempfang mehr.
Wo liegt der Hund begraben?
Didi
Geplaatst op 3 februari 2019 - 11:41
Konnte sie mall mit telnet/putty im box einloggen und schauen was dmesg sagt?
Mut@nt HD51 STB 4K
Geplaatst op 3 februari 2019 - 14:17
Ich hoffe einmal das Telnet das gleiche macht wie Putty
Zum testen bin ich über Webif auf die Box gegangen. Der TV ist von meiner Frau belegt :-)
Hier einmal ohne DVC-T Stick:
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06818d0 (6631 kB)
[ 0.000000] .init : 0xc0876000 - 0xc08cc000 ( 344 kB)
[ 0.000000] .data : 0xc08cc000 - 0xc0926578 ( 362 kB)
[ 0.000000] .bss : 0xc0928000 - 0xc095fcb4 ( 224 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq:
16)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq:
17)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq:
18)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq:
19)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, pare
nt IRQ(s): 2)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, pare
nt IRQ(s): 3)
[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (vi
rt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980
46511093ns
[ 0.000011] Switching to timer-based delay loop, resolution 37ns
[ 0.000290] Console: colour dummy device 80x30
[ 0.000310] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000319] pid_max: default: 32768 minimum: 301
[ 0.000429] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000435] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000892] CPU: Testing write buffer coherency: ok
[ 0.001149] CPU0: update cpu_capacity 1024
[ 0.001157] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001372] Setting up static identity map for 0x8440 - 0x8498
[ 0.003377] smp: Bringing up secondary CPUs ...
[ 0.004098] CPU1: update cpu_capacity 1024
[ 0.004101] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004163] smp: Brought up 1 node, 2 CPUs
[ 0.004172] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.004177] CPU: All CPU(s) started in SVC mode.
[ 0.004572] devtmpfs: initialized
[ 0.010801] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0
rev 0
[ 0.010996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 1911260446275000 ns
[ 0.011015] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.025397] NET: Registered protocol family 16
[ 0.025802] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.030423] cpuidle: using governor ladder
[ 0.034357] cpuidle: using governor menu
[ 0.043482] No ATAGs?
[ 0.043581] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.043591] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.058352] SCSI subsystem initialized
[ 0.058601] libata version 3.00 loaded.
[ 0.058999] usbcore: registered new interface driver usbfs
[ 0.059051] usbcore: registered new interface driver hub
[ 0.059095] usbcore: registered new device driver usb
[ 0.059164] Linux cec interface: v0.10
[ 0.059214] Linux video capture interface: v2.00
[ 0.059285] pps_core: LinuxPPS API ver. 1 registered
[ 0.059290] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[ 0.059311] PTP clock support registered
[ 0.059831] Advanced Linux Sound Architecture Driver Initialized.
[ 0.061141] clocksource: Switched to clocksource arch_sys_counter
[ 0.061376] FS-Cache: Loaded
[ 0.067571] NET: Registered protocol family 2
[ 0.067932] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.067971] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.068044] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.068129] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068152] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068265] NET: Registered protocol family 1
[ 0.068656] RPC: Registered named UNIX socket transport module.
[ 0.068662] RPC: Registered udp transport module.
[ 0.068667] RPC: Registered tcp transport module.
[ 0.068672] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.068682] PCI: CLS 0 bytes, default 64
[ 0.069075] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte
rs available
[ 0.070374] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.071023] NFS: Registering the id_resolver key type
[ 0.071043] Key type id_resolver registered
[ 0.071047] Key type id_legacy registered
[ 0.071057] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.071304] fuse init (API version 7.26)
[ 0.073198] bounce: pool size: 64 pages
[ 0.073243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
51)
[ 0.073251] io scheduler noop registered
[ 0.073257] io scheduler deadline registered
[ 0.073288] io scheduler cfq registered (default)
[ 0.073595] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs:
47, 48
[ 0.073915] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
[ 0.074285] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[ 0.074964] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800
000
[ 0.075481] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc0000
00
[ 0.110182] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.111748] console [ttyS0] disabled
[ 0.111785] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud =
5062500) is a 16550A
[ 0.786957] console [ttyS0] enabled
[ 0.790999] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud =
5062500) is a 16550A
[ 0.800335] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud =
5062500) is a 16550A
[ 0.816627] brd: module loaded
[ 0.823551] loop: module loaded
[ 0.827545] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for
/rdb/sata-phy@f0458100
[ 0.836709] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
[ 0.842780] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[ 0.860014] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0
x1 impl platform mode
[ 0.868995] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp sl
um part
[ 0.878108] scsi host0: brcm-ahci
[ 0.881694] scsi host1: brcm-ahci
[ 0.885178] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1
00 irq 44
[ 0.893115] ata2: DUMMY
[ 0.895574] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[ 0.902751] libphy: Fixed MDIO Bus: probed
[ 0.907164] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.924438] libphy: bcmgenet MII bus: probed
[ 0.951408] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
[ 0.957262] e1000e: Copyright© 1999 - 2015 Intel Corporation.
[ 0.982240] ehci-brcm: EHCI BRCM driver
[ 0.986207] ehci-brcm f0470300.ehci: EHCI Host Controller
[ 0.991638] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus num
ber 1
[ 1.009336] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
[ 1.015668] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.021447] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[ 1.027940] hub 1-0:1.0: USB hub found
[ 1.031733] hub 1-0:1.0: 1 port detected
[ 1.035943] ehci-brcm f0470500.ehci: EHCI Host Controller
[ 1.041372] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus num
ber 2
[ 1.059060] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
[ 1.071447] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[ 1.077822] hub 2-0:1.0: USB hub found
[ 1.081604] hub 2-0:1.0: 1 port detected
[ 1.085735] ohci-brcm: OHCI BRCM driver
[ 1.089744] ohci-brcm f0470400.ohci: BRCM OHCI controller
[ 1.095173] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus num
ber 3
[ 1.102821] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
[ 1.164841] hub 3-0:1.0: USB hub found
[ 1.168628] hub 3-0:1.0: 1 port detected
[ 1.172781] ohci-brcm f0470600.ohci: BRCM OHCI controller
[ 1.178209] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus num
ber 4
[ 1.185853] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
[ 1.247815] hub 4-0:1.0: USB hub found
[ 1.251597] hub 4-0:1.0: 1 port detected
[ 1.255761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262323] ehci-pci: EHCI PCI platform driver
[ 1.266840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.273044] ohci-pci: OHCI PCI platform driver
[ 1.277842] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.283189] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 5
[ 1.290892] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 q
uirks 0x00010010
[ 1.299466] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
[ 1.306149] hub 5-0:1.0: USB hub found
[ 1.309944] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.317212] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.322548] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 6
[ 1.330091] usb usb6: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 1.338578] hub 6-0:1.0: USB hub found
[ 1.342361] hub 6-0:1.0: 2 ports detected
[ 1.346698] usbcore: registered new interface driver uas
[ 1.352114] usbcore: registered new interface driver usb-storage
[ 1.358387] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[ 1.365219] mousedev: PS/2 mouse device common for all mice
[ 1.371117] i2c /dev entries driver
[ 1.374880] IR NEC protocol handler initialized
[ 1.379432] IR RC5(x/sz) protocol handler initialized
[ 1.384493] IR RC6 protocol handler initialized
[ 1.389051] IR JVC protocol handler initialized
[ 1.393589] IR Sony protocol handler initialized
[ 1.398238] IR SANYO protocol handler initialized
[ 1.402955] IR Sharp protocol handler initialized
[ 1.407670] IR MCE Keyboard/mouse protocol handler initialized
[ 1.413513] IR XMP protocol handler initialized
[ 1.416442] usb 2-1: new high-speed USB device number 2 using ehci-brcm
[ 1.424686] smssdio: Siano SMS1xxx SDIO driver
[ 1.429141] smssdio: Copyright Pierre Ossman
[ 1.433843] sdhci: Secure Digital Host Controller Interface driver
[ 1.440042] sdhci: Copyright© Pierre Ossman
[ 1.444411] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.453761] hub 1-1:1.0: USB hub found
[ 1.457686] hub 1-1:1.0: 4 ports detected
[ 1.487448] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A
DMA
[ 1.495031] hidraw: raw HID events driver © Jiri Kosina
[ 1.500641] usbcore: registered new interface driver usbhid
[ 1.506234] usbhid: USB HID core driver
[ 1.512665] NET: Registered protocol family 17
[ 1.517188] Key type dns_resolver registered
[ 1.521570] ThumbEE CPU extension supported.
[ 1.525860] Registering SWP/SWPB emulation handler
[ 1.538259] ALSA device list:
[ 1.541274] No soundcards found.
[ 1.545264] Waiting for root device /dev/mmcblk0p3...
[ 1.633380] mmc0: new high speed MMC card at address 0001
[ 1.639195] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
[ 1.643877] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
[ 1.649937] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
[ 1.655999] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
[ 1.661796] usb 6-2: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.672078] Alternate GPT is invalid, using primary GPT.
[ 1.677458] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.686463] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incomp
atibilities
[ 1.695032] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1.701355] scsi host2: usb-storage 6-2:1.0
[ 1.759466] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.775628] EXT4-fs (mmcblk0p3): recovery complete
[ 1.781166] random: fast init done
[ 1.785670] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. O
pts: (null)
[ 1.793829] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 1.802329] devtmpfs: mounted
[ 1.805723] Freeing unused kernel memory: 344K
[ 1.810182] This architecture does not have kernel memory protection.
[ 1.872461] usb 2-1: device not accepting address 2, error -71
[ 2.262066] hd51_1: loading out-of-tree module taints kernel.
[ 2.269169] usbcore: registered new interface driver tpm
[ 2.723061] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ
: 0 ANSI: 6
[ 2.732050] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.733472] sd 2:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/93
2 GiB)
[ 2.733839] sd 2:0:0:0: [sda] Write Protect is off
[ 2.733843] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.734211] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 2.777625] sda: sda1
[ 2.783314] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.222054] EXT4-fs (sda1): recovery complete
[ 3.232127] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
nodelalloc
[ 4.292973] hd51: module_layout: kernel tainted.
[ 4.297644] Disabling lock debugging due to kernel taint
[ 5.555271] alloc_contig_range: [14800, 1ad00) PFNs busy
[ 7.166751] Console: switching to colour frame buffer device 160x45
[ 7.479238] input: dreambox remote control (native) as /devices/virtual/input
/input0
[ 7.487413] input: dreambox advanced remote control (native) as /devices/virt
ual/input/input1
[ 7.634543] dvbdev: DVB: registering new adapter (dvb0)
[ 7.643597] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)..
.
[ 7.651540] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)..
.
[ 7.880106] input: front panel as /devices/virtual/input/input2
[ 7.899799] Registered IR keymap rc-cec
[ 7.904036] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 7.911520] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 7.958318] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[ 8.343170] Console: switching to colour dummy device 80x30
[ 9.065444] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, pat
ch: 1
[ 9.074846] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[ 10.611974] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control rx/tx
[ 12.303293] NET: Registered protocol family 10
[ 12.308937] Segment Routing with IPv6
[ 13.438992] random: crng init done
[101052.161876] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[101053.706778] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flo
w control rx/tx
[101053.715281] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[102988.169978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[102989.714648] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flo
w control rx/tx
[102989.723319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[112394.655914] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112396.200620] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flo
w control rx/tx
[112396.209225] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@ax:~#
Und einmal mit Stick:
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06818d0 (6631 kB)
[ 0.000000] .init : 0xc0876000 - 0xc08cc000 ( 344 kB)
[ 0.000000] .data : 0xc08cc000 - 0xc0926578 ( 362 kB)
[ 0.000000] .bss : 0xc0928000 - 0xc095fcb4 ( 224 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq:
16)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq:
17)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq:
18)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq:
19)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, pare
nt IRQ(s): 2)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, pare
nt IRQ(s): 3)
[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (vi
rt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980
46511093ns
[ 0.000011] Switching to timer-based delay loop, resolution 37ns
[ 0.000290] Console: colour dummy device 80x30
[ 0.000310] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000319] pid_max: default: 32768 minimum: 301
[ 0.000429] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000435] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000892] CPU: Testing write buffer coherency: ok
[ 0.001149] CPU0: update cpu_capacity 1024
[ 0.001157] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001372] Setting up static identity map for 0x8440 - 0x8498
[ 0.003377] smp: Bringing up secondary CPUs ...
[ 0.004098] CPU1: update cpu_capacity 1024
[ 0.004101] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004163] smp: Brought up 1 node, 2 CPUs
[ 0.004172] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.004177] CPU: All CPU(s) started in SVC mode.
[ 0.004572] devtmpfs: initialized
[ 0.010801] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0
rev 0
[ 0.010996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 1911260446275000 ns
[ 0.011015] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.025397] NET: Registered protocol family 16
[ 0.025802] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.030423] cpuidle: using governor ladder
[ 0.034357] cpuidle: using governor menu
[ 0.043482] No ATAGs?
[ 0.043581] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.043591] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.058352] SCSI subsystem initialized
[ 0.058601] libata version 3.00 loaded.
[ 0.058999] usbcore: registered new interface driver usbfs
[ 0.059051] usbcore: registered new interface driver hub
[ 0.059095] usbcore: registered new device driver usb
[ 0.059164] Linux cec interface: v0.10
[ 0.059214] Linux video capture interface: v2.00
[ 0.059285] pps_core: LinuxPPS API ver. 1 registered
[ 0.059290] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[ 0.059311] PTP clock support registered
[ 0.059831] Advanced Linux Sound Architecture Driver Initialized.
[ 0.061141] clocksource: Switched to clocksource arch_sys_counter
[ 0.061376] FS-Cache: Loaded
[ 0.067571] NET: Registered protocol family 2
[ 0.067932] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.067971] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.068044] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.068129] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068152] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068265] NET: Registered protocol family 1
[ 0.068656] RPC: Registered named UNIX socket transport module.
[ 0.068662] RPC: Registered udp transport module.
[ 0.068667] RPC: Registered tcp transport module.
[ 0.068672] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.068682] PCI: CLS 0 bytes, default 64
[ 0.069075] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte
rs available
[ 0.070374] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.071023] NFS: Registering the id_resolver key type
[ 0.071043] Key type id_resolver registered
[ 0.071047] Key type id_legacy registered
[ 0.071057] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.071304] fuse init (API version 7.26)
[ 0.073198] bounce: pool size: 64 pages
[ 0.073243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
51)
[ 0.073251] io scheduler noop registered
[ 0.073257] io scheduler deadline registered
[ 0.073288] io scheduler cfq registered (default)
[ 0.073595] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs:
47, 48
[ 0.073915] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
[ 0.074285] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[ 0.074964] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800
000
[ 0.075481] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc0000
00
[ 0.110182] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.111748] console [ttyS0] disabled
[ 0.111785] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud =
5062500) is a 16550A
[ 0.786957] console [ttyS0] enabled
[ 0.790999] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud =
5062500) is a 16550A
[ 0.800335] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud =
5062500) is a 16550A
[ 0.816627] brd: module loaded
[ 0.823551] loop: module loaded
[ 0.827545] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for
/rdb/sata-phy@f0458100
[ 0.836709] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
[ 0.842780] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[ 0.860014] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0
x1 impl platform mode
[ 0.868995] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp sl
um part
[ 0.878108] scsi host0: brcm-ahci
[ 0.881694] scsi host1: brcm-ahci
[ 0.885178] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1
00 irq 44
[ 0.893115] ata2: DUMMY
[ 0.895574] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[ 0.902751] libphy: Fixed MDIO Bus: probed
[ 0.907164] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.924438] libphy: bcmgenet MII bus: probed
[ 0.951408] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
[ 0.957262] e1000e: Copyright© 1999 - 2015 Intel Corporation.
[ 0.982240] ehci-brcm: EHCI BRCM driver
[ 0.986207] ehci-brcm f0470300.ehci: EHCI Host Controller
[ 0.991638] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus num
ber 1
[ 1.009336] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
[ 1.015668] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.021447] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[ 1.027940] hub 1-0:1.0: USB hub found
[ 1.031733] hub 1-0:1.0: 1 port detected
[ 1.035943] ehci-brcm f0470500.ehci: EHCI Host Controller
[ 1.041372] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus num
ber 2
[ 1.059060] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
[ 1.071447] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[ 1.077822] hub 2-0:1.0: USB hub found
[ 1.081604] hub 2-0:1.0: 1 port detected
[ 1.085735] ohci-brcm: OHCI BRCM driver
[ 1.089744] ohci-brcm f0470400.ohci: BRCM OHCI controller
[ 1.095173] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus num
ber 3
[ 1.102821] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
[ 1.164841] hub 3-0:1.0: USB hub found
[ 1.168628] hub 3-0:1.0: 1 port detected
[ 1.172781] ohci-brcm f0470600.ohci: BRCM OHCI controller
[ 1.178209] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus num
ber 4
[ 1.185853] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
[ 1.247815] hub 4-0:1.0: USB hub found
[ 1.251597] hub 4-0:1.0: 1 port detected
[ 1.255761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262323] ehci-pci: EHCI PCI platform driver
[ 1.266840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.273044] ohci-pci: OHCI PCI platform driver
[ 1.277842] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.283189] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 5
[ 1.290892] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 q
uirks 0x00010010
[ 1.299466] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
[ 1.306149] hub 5-0:1.0: USB hub found
[ 1.309944] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.317212] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.322548] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 6
[ 1.330091] usb usb6: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 1.338578] hub 6-0:1.0: USB hub found
[ 1.342361] hub 6-0:1.0: 2 ports detected
[ 1.346698] usbcore: registered new interface driver uas
[ 1.352114] usbcore: registered new interface driver usb-storage
[ 1.358387] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[ 1.365219] mousedev: PS/2 mouse device common for all mice
[ 1.371117] i2c /dev entries driver
[ 1.374880] IR NEC protocol handler initialized
[ 1.379432] IR RC5(x/sz) protocol handler initialized
[ 1.384493] IR RC6 protocol handler initialized
[ 1.389051] IR JVC protocol handler initialized
[ 1.393589] IR Sony protocol handler initialized
[ 1.398238] IR SANYO protocol handler initialized
[ 1.402955] IR Sharp protocol handler initialized
[ 1.407670] IR MCE Keyboard/mouse protocol handler initialized
[ 1.413513] IR XMP protocol handler initialized
[ 1.416442] usb 2-1: new high-speed USB device number 2 using ehci-brcm
[ 1.424686] smssdio: Siano SMS1xxx SDIO driver
[ 1.429141] smssdio: Copyright Pierre Ossman
[ 1.433843] sdhci: Secure Digital Host Controller Interface driver
[ 1.440042] sdhci: Copyright© Pierre Ossman
[ 1.444411] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.453761] hub 1-1:1.0: USB hub found
[ 1.457686] hub 1-1:1.0: 4 ports detected
[ 1.487448] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A
DMA
[ 1.495031] hidraw: raw HID events driver © Jiri Kosina
[ 1.500641] usbcore: registered new interface driver usbhid
[ 1.506234] usbhid: USB HID core driver
[ 1.512665] NET: Registered protocol family 17
[ 1.517188] Key type dns_resolver registered
[ 1.521570] ThumbEE CPU extension supported.
[ 1.525860] Registering SWP/SWPB emulation handler
[ 1.538259] ALSA device list:
[ 1.541274] No soundcards found.
[ 1.545264] Waiting for root device /dev/mmcblk0p3...
[ 1.633380] mmc0: new high speed MMC card at address 0001
[ 1.639195] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
[ 1.643877] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
[ 1.649937] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
[ 1.655999] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
[ 1.661796] usb 6-2: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.672078] Alternate GPT is invalid, using primary GPT.
[ 1.677458] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.686463] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incomp
atibilities
[ 1.695032] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1.701355] scsi host2: usb-storage 6-2:1.0
[ 1.759466] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.775628] EXT4-fs (mmcblk0p3): recovery complete
[ 1.781166] random: fast init done
[ 1.785670] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. O
pts: (null)
[ 1.793829] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 1.802329] devtmpfs: mounted
[ 1.805723] Freeing unused kernel memory: 344K
[ 1.810182] This architecture does not have kernel memory protection.
[ 1.872461] usb 2-1: device not accepting address 2, error -71
[ 2.262066] hd51_1: loading out-of-tree module taints kernel.
[ 2.269169] usbcore: registered new interface driver tpm
[ 2.723061] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ
: 0 ANSI: 6
[ 2.732050] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.733472] sd 2:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/93
2 GiB)
[ 2.733839] sd 2:0:0:0: [sda] Write Protect is off
[ 2.733843] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.734211] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 2.777625] sda: sda1
[ 2.783314] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.222054] EXT4-fs (sda1): recovery complete
[ 3.232127] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
nodelalloc
[ 4.292973] hd51: module_layout: kernel tainted.
[ 4.297644] Disabling lock debugging due to kernel taint
[ 5.555271] alloc_contig_range: [14800, 1ad00) PFNs busy
[ 7.166751] Console: switching to colour frame buffer device 160x45
[ 7.479238] input: dreambox remote control (native) as /devices/virtual/input
/input0
[ 7.487413] input: dreambox advanced remote control (native) as /devices/virt
ual/input/input1
[ 7.634543] dvbdev: DVB: registering new adapter (dvb0)
[ 7.643597] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)..
.
[ 7.651540] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)..
.
[ 7.880106] input: front panel as /devices/virtual/input/input2
[ 7.899799] Registered IR keymap rc-cec
[ 7.904036] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 7.911520] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 7.958318] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[ 8.343170] Console: switching to colour dummy device 80x30
[ 9.065444] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, pat
ch: 1
[ 9.074846] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[ 10.611974] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control rx/tx
[ 12.303293] NET: Registered protocol family 10
[ 12.308937] Segment Routing with IPv6
[ 13.438992] random: crng init done
[101052.161876] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[101053.706778] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flo
w control rx/tx
[101053.715281] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[102988.169978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[102989.714648] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flo
w control rx/tx
[102989.723319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[112394.655914] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112396.200620] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flo
w control rx/tx
[112396.209225] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@ax:~#
Geplaatst op 3 februari 2019 - 19:12
7.643597] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)..
7.651540] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)..
Weiter steht nichts das sie einem vTuner angeschlossen habt.
Haben sie richtigen treibern installiert von dvb-t stick?
mit lsusb und lsmod konnte sie sehen was wird detektiert und geläden.
und root@ax:~# ich denke das sie kein "official" Openpli gebrauchen jetzt stimmt?
Mut@nt HD51 STB 4K
Geplaatst op 3 februari 2019 - 19:32
Die beiden Sat Tuner sind fest eingebaut.
Der DVB-T Stick wird erkannt und funktioniert.
Der Treiber muss der richtige sein, erst als dieser installiert wurde, wurde der Stick erkannt.
An meiner ET9x00 geht beides zur gleichen Zeit.
Open Pli wurde direkt von der OpenPli Seite herunter geladen.
DVB-S funktioniert mit beiden Tunern wenn kein DVB-T Stick eingesteckt ist.
DVB-T funktioniert. Dann ist aber bei DVB-S immer Tunen fehlgeschlagen.
Unbenannt.jpg 105K
2 Aantal bijlagen
Geplaatst op 3 februari 2019 - 20:21
Ich kann im beides logs nirgendwas sehen von angeschlossen vtuner.
So leider kann ich nicht hilfen weil dein nova tuner im dmesg nicht sichtbar.
Dar sollte denke ich immer einem regeln sein wo vtuner gefunden wird und "registering adapter X frontend X"
Ich denke das sie einem kernel gebrauchen ohne die benotigde vTuner patch das es Adapter 1 gebraucht fur vtuner
Wann es einem Openpli image ist ohne anpassungen dann mussen sie ersten vtuner treibern von feed installieren. Die treibern sind nicht standard installiert.
Auch ist es unmogelich das dein box root@ax:~# ist weil HD51 image von Openpli haben immer root@hd51:~# so sie haben hostname selben geandert.
Mut@nt HD51 STB 4K
Geplaatst op 3 februari 2019 - 21:56
AX habe ich die Box genannt weil im Netzwerk eine 2. Box mit HD51 vorhanden ist.
Ich habe die 4 Treiber nachinstalliert und den Stick nochmal eingesteckt.
Ganz unten steht etwas von VTuner
Hier der Auszug:
[ 0.000000] .bss : 0xc0928000 - 0xc095fcb4 ( 224 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq:
16)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq:
17)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq:
18)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq:
19)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, pare
nt IRQ(s): 2)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, pare
nt IRQ(s): 3)
[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (vi
rt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980
46511093ns
[ 0.000011] Switching to timer-based delay loop, resolution 37ns
[ 0.000295] Console: colour dummy device 80x30
[ 0.000316] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000325] pid_max: default: 32768 minimum: 301
[ 0.000436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000443] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000898] CPU: Testing write buffer coherency: ok
[ 0.001154] CPU0: update cpu_capacity 1024
[ 0.001160] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001367] Setting up static identity map for 0x8440 - 0x8498
[ 0.003371] smp: Bringing up secondary CPUs ...
[ 0.004093] CPU1: update cpu_capacity 1024
[ 0.004096] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004163] smp: Brought up 1 node, 2 CPUs
[ 0.004174] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.004179] CPU: All CPU(s) started in SVC mode.
[ 0.004579] devtmpfs: initialized
[ 0.010876] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0
rev 0
[ 0.011076] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 1911260446275000 ns
[ 0.011125] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.025386] NET: Registered protocol family 16
[ 0.025787] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.030408] cpuidle: using governor ladder
[ 0.034341] cpuidle: using governor menu
[ 0.043494] No ATAGs?
[ 0.043586] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.043596] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.058498] SCSI subsystem initialized
[ 0.058840] libata version 3.00 loaded.
[ 0.059070] usbcore: registered new interface driver usbfs
[ 0.059118] usbcore: registered new interface driver hub
[ 0.059167] usbcore: registered new device driver usb
[ 0.059234] Linux cec interface: v0.10
[ 0.059281] Linux video capture interface: v2.00
[ 0.059349] pps_core: LinuxPPS API ver. 1 registered
[ 0.059355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[ 0.059375] PTP clock support registered
[ 0.059911] Advanced Linux Sound Architecture Driver Initialized.
[ 0.061243] clocksource: Switched to clocksource arch_sys_counter
[ 0.061474] FS-Cache: Loaded
[ 0.067437] NET: Registered protocol family 2
[ 0.067879] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.067925] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.067999] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.068088] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068113] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068230] NET: Registered protocol family 1
[ 0.068604] RPC: Registered named UNIX socket transport module.
[ 0.068610] RPC: Registered udp transport module.
[ 0.068613] RPC: Registered tcp transport module.
[ 0.068617] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.068625] PCI: CLS 0 bytes, default 64
[ 0.068985] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte
rs available
[ 0.070354] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.071006] NFS: Registering the id_resolver key type
[ 0.071030] Key type id_resolver registered
[ 0.071034] Key type id_legacy registered
[ 0.071044] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.071284] fuse init (API version 7.26)
[ 0.073214] bounce: pool size: 64 pages
[ 0.073261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
51)
[ 0.073271] io scheduler noop registered
[ 0.073277] io scheduler deadline registered
[ 0.073307] io scheduler cfq registered (default)
[ 0.073657] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs:
47, 48
[ 0.073972] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
[ 0.074323] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[ 0.074934] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800
000
[ 0.075417] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc0000
00
[ 0.109956] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.111496] console [ttyS0] disabled
[ 0.111558] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud =
5062500) is a 16550A
[ 0.786688] console [ttyS0] enabled
[ 0.790760] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud =
5062500) is a 16550A
[ 0.800097] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud =
5062500) is a 16550A
[ 0.816369] brd: module loaded
[ 0.823238] loop: module loaded
[ 0.827200] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for
/rdb/sata-phy@f0458100
[ 0.836371] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
[ 0.842443] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[ 0.859677] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0
x1 impl platform mode
[ 0.868659] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp sl
um part
[ 0.877797] scsi host0: brcm-ahci
[ 0.881383] scsi host1: brcm-ahci
[ 0.884867] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1
00 irq 44
[ 0.892801] ata2: DUMMY
[ 0.895263] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[ 0.902429] libphy: Fixed MDIO Bus: probed
[ 0.906849] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.924528] libphy: bcmgenet MII bus: probed
[ 0.951489] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
[ 0.957344] e1000e: Copyright© 1999 - 2015 Intel Corporation.
[ 0.981319] ehci-brcm: EHCI BRCM driver
[ 0.985285] ehci-brcm f0470300.ehci: EHCI Host Controller
[ 0.990718] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus num
ber 1
[ 1.008415] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
[ 1.015358] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.020534] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[ 1.021088] hub 1-0:1.0: USB hub found
[ 1.021113] hub 1-0:1.0: 1 port detected
[ 1.021404] ehci-brcm f0470500.ehci: EHCI Host Controller
[ 1.021417] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus num
ber 2
[ 1.031530] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
[ 1.040526] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[ 1.041024] hub 2-0:1.0: USB hub found
[ 1.041067] hub 2-0:1.0: 1 port detected
[ 1.041294] ohci-brcm: OHCI BRCM driver
[ 1.041460] ohci-brcm f0470400.ohci: BRCM OHCI controller
[ 1.041473] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus num
ber 3
[ 1.041558] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
[ 1.095946] hub 3-0:1.0: USB hub found
[ 1.099766] hub 3-0:1.0: 1 port detected
[ 1.103944] ohci-brcm f0470600.ohci: BRCM OHCI controller
[ 1.109375] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus num
ber 4
[ 1.117031] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
[ 1.178918] hub 4-0:1.0: USB hub found
[ 1.182710] hub 4-0:1.0: 1 port detected
[ 1.186838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.193403] ehci-pci: EHCI PCI platform driver
[ 1.197916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.204120] ohci-pci: OHCI PCI platform driver
[ 1.208926] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.214271] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 5
[ 1.221973] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 q
uirks 0x00010010
[ 1.230548] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
[ 1.237012] hub 5-0:1.0: USB hub found
[ 1.240807] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.248076] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.253416] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 6
[ 1.261000] usb usb6: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 1.269480] hub 6-0:1.0: USB hub found
[ 1.273265] hub 6-0:1.0: 2 ports detected
[ 1.277633] usbcore: registered new interface driver uas
[ 1.283050] usbcore: registered new interface driver usb-storage
[ 1.289589] mousedev: PS/2 mouse device common for all mice
[ 1.295379] i2c /dev entries driver
[ 1.299153] IR NEC protocol handler initialized
[ 1.303707] IR RC5(x/sz) protocol handler initialized
[ 1.308772] IR RC6 protocol handler initialized
[ 1.313319] IR JVC protocol handler initialized
[ 1.317863] IR Sony protocol handler initialized
[ 1.322494] IR SANYO protocol handler initialized
[ 1.327211] IR Sharp protocol handler initialized
[ 1.331929] IR MCE Keyboard/mouse protocol handler initialized
[ 1.337775] IR XMP protocol handler initialized
[ 1.342322] smssdio: Siano SMS1xxx SDIO driver
[ 1.346778] smssdio: Copyright Pierre Ossman
[ 1.351440] sdhci: Secure Digital Host Controller Interface driver
[ 1.357638] sdhci: Copyright© Pierre Ossman
[ 1.362008] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.370191] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[ 1.391715] hub 1-1:1.0: USB hub found
[ 1.395630] hub 1-1:1.0: 4 ports detected
[ 1.412536] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A
DMA
[ 1.420107] hidraw: raw HID events driver © Jiri Kosina
[ 1.425716] usbcore: registered new interface driver usbhid
[ 1.431311] usbhid: USB HID core driver
[ 1.435745] NET: Registered protocol family 17
[ 1.440275] Key type dns_resolver registered
[ 1.444652] ThumbEE CPU extension supported.
[ 1.448944] Registering SWP/SWPB emulation handler
[ 1.459219] ALSA device list:
[ 1.462230] No soundcards found.
[ 1.466207] Waiting for root device /dev/mmcblk0p3...
[ 1.556546] mmc0: new high speed MMC card at address 0001
[ 1.562361] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
[ 1.567037] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
[ 1.573093] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
[ 1.579151] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
[ 1.588426] Alternate GPT is invalid, using primary GPT.
[ 1.593786] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.598673] usb 6-2: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.613027] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incomp
atibilities
[ 1.626162] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1.626701] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. O
pts: (null)
[ 1.626729] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 1.633734] devtmpfs: mounted
[ 1.634134] Freeing unused kernel memory: 344K
[ 1.634136] This architecture does not have kernel memory protection.
[ 1.660620] scsi host2: usb-storage 6-2:1.0
[ 1.715724] random: fast init done
[ 1.716552] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.822583] usb 1-1.2: new high-speed USB device number 4 using ehci-brcm
[ 1.898431] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 1.906918] dvb-usb: will pass the complete MPEG2 transport stream to the sof
tware demuxer.
[ 1.917712] dvbdev: DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 2.132613] hd51_1: loading out-of-tree module taints kernel.
[ 2.139918] usbcore: registered new interface driver tpm
[ 2.155449] usb 1-1.2: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC).
..
[ 2.384383] dib0070: DiB0070: successfully identified
[ 2.389518] Registered IR keymap rc-dib0700-rc5
[ 2.394432] input: IR-receiver inside an USB DVB receiver as /devices/platfor
m/f0470300.ehci/usb1/1-1/1-1.2/rc/rc0/input0
[ 2.405707] rc rc0: IR-receiver inside an USB DVB receiver as /devices/platfo
rm/f0470300.ehci/usb1/1-1/1-1.2/rc/rc0
[ 2.416652] dvb-usb: schedule remote query interval to 50 msecs.
[ 2.422695] dvb-usb: Hauppauge Nova-T Stick successfully initialized and conn
ected.
[ 2.430798] usbcore: registered new interface driver dvb_usb_dib0700
[ 2.723196] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ
: 0 ANSI: 6
[ 2.732106] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.733590] sd 2:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/93
2 GiB)
[ 2.733965] sd 2:0:0:0: [sda] Write Protect is off
[ 2.733970] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.734313] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 4.166738] hd51: module_layout: kernel tainted.
[ 4.171385] Disabling lock debugging due to kernel taint
[ 5.813943] sda: sda1
[ 5.819610] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.193545] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
nodelalloc
[ 7.035236] Console: switching to colour frame buffer device 160x45
[ 7.339592] input: dreambox remote control (native) as /devices/virtual/input
/input1
[ 7.348004] input: dreambox advanced remote control (native) as /devices/virt
ual/input/input2
[ 7.493738] dvbdev: DVB: registering new adapter (dvb0)
[ 7.499234] i2c i2c-3: No suitable probing method supported for address 0x60
[ 7.506341] i2c i2c-3: No suitable probing method supported for address 0x61
[ 7.513441] i2c i2c-4: No suitable probing method supported for address 0x60
[ 7.520530] i2c i2c-4: No suitable probing method supported for address 0x61
[ 7.527666] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)..
.
[ 7.535143] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)..
.
[ 7.764710] input: front panel as /devices/virtual/input/input3
[ 7.777885] Registered IR keymap rc-cec
[ 7.782065] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc1/input4
[ 7.789449] rc rc1: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc1
[ 7.831717] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[ 8.234153] Console: switching to colour dummy device 80x30
[ 8.979532] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, pat
ch: 1
[ 8.988802] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[ 10.526074] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control rx/tx
[ 12.832746] NET: Registered protocol family 10
[ 12.838777] Segment Routing with IPv6
[ 14.122993] platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)..
.
[ 14.189261] random: crng init done
root@ax:~#
Zum Zeitpunkt des Auszuges war der Stick aktiv und ein DVB-T Programm eingeschaltet.
Auf DVB-S kommt "Tunen fehlgeschlagen" Empfang liegt bei 0%.
Unbenannt.jpg 24,9K
0 Aantal bijlagen
Geplaatst op 3 februari 2019 - 22:08
DVB-S ist Unicable Durline UK124
Ich glaube wir schreiben aneinander vorbei.
Mein Problem ist das wenn Nova-T eingesteckt ist die Sat Tuner nicht mehr funktionieren.
Nova-T ist OK und funktioniert.
Veranderd door Didi1, 3 februari 2019 - 22:13
Geplaatst op 3 februari 2019 - 22:27
Jetzt ist vtuner dar:
[ 14.122993] platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)..
Ich denke das es nicht stimmt das es auf adapter0 wird initialisiert.
Dar ist einem kernel patch wo es vtuner nach adapter 1 setzt https://github.com/H...adapter_0.patch
Es sollte mussen aussiehen denke ich wie:
[ 14.122993] platform dvb0.0: DVB: registering adapter 1 frontend 0 (vtuner)..
Mut@nt HD51 STB 4K
Geplaatst op 4 februari 2019 - 17:15
Bei meiner ET9x00 steht das gleiche.
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
usb 1-2: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
dib0700: rc submit urb failed
usbcore: registered new interface driver dvb_usb_dib0700
Console: switching to colour dummy device 80x25
NET: Registered protocol family 10
platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
root@ET9X00:~#
Dort funktioniert beides zusammen.
Beide Boxen läuft das aktuelle Pli 7
Geplaatst op 23 juni 2019 - 08:27
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq:
16)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq:
17)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq:
18)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq:
19)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, pare
nt IRQ(s): 2)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, pare
nt IRQ(s): 3)
[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (vi
rt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980
46511093ns
[ 0.000011] Switching to timer-based delay loop, resolution 37ns
[ 0.000290] Console: colour dummy device 80x30
[ 0.000311] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000320] pid_max: default: 32768 minimum: 301
[ 0.000432] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000438] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000894] CPU: Testing write buffer coherency: ok
[ 0.001138] CPU0: update cpu_capacity 1024
[ 0.001145] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001360] Setting up static identity map for 0x8440 - 0x8498
[ 0.003342] smp: Bringing up secondary CPUs ...
[ 0.004064] CPU1: update cpu_capacity 1024
[ 0.004068] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004130] smp: Brought up 1 node, 2 CPUs
[ 0.004141] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.004146] CPU: All CPU(s) started in SVC mode.
[ 0.004533] devtmpfs: initialized
[ 0.010797] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0
rev 0
[ 0.010990] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 1911260446275000 ns
[ 0.011008] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.025259] NET: Registered protocol family 16
[ 0.025703] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.030385] cpuidle: using governor ladder
[ 0.034322] cpuidle: using governor menu
[ 0.043457] No ATAGs?
[ 0.043563] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.043571] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.058260] SCSI subsystem initialized
[ 0.058523] libata version 3.00 loaded.
[ 0.058938] usbcore: registered new interface driver usbfs
[ 0.058989] usbcore: registered new interface driver hub
[ 0.059037] usbcore: registered new device driver usb
[ 0.059104] Linux cec interface: v0.10
[ 0.059150] Linux video capture interface: v2.00
[ 0.059217] pps_core: LinuxPPS API ver. 1 registered
[ 0.059222] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[ 0.059243] PTP clock support registered
[ 0.059773] Advanced Linux Sound Architecture Driver Initialized.
[ 0.061092] clocksource: Switched to clocksource arch_sys_counter
[ 0.061329] FS-Cache: Loaded
[ 0.067465] NET: Registered protocol family 2
[ 0.067830] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.067870] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.067943] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.068028] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068052] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.068161] NET: Registered protocol family 1
[ 0.068746] RPC: Registered named UNIX socket transport module.
[ 0.068752] RPC: Registered udp transport module.
[ 0.068755] RPC: Registered tcp transport module.
[ 0.068759] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.068768] PCI: CLS 0 bytes, default 64
[ 0.069139] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte
rs available
[ 0.070659] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.071236] NFS: Registering the id_resolver key type
[ 0.071257] Key type id_resolver registered
[ 0.071261] Key type id_legacy registered
[ 0.071271] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.071543] fuse init (API version 7.26)
[ 0.073464] bounce: pool size: 64 pages
[ 0.073507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
51)
[ 0.073517] io scheduler noop registered
[ 0.073522] io scheduler deadline registered
[ 0.073552] io scheduler cfq registered (default)
[ 0.073833] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs:
47, 48
[ 0.074153] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
[ 0.074608] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[ 0.075202] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800
000
[ 0.075708] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc0000
00
[ 0.110255] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.111832] console [ttyS0] disabled
[ 0.111875] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud =
5062500) is a 16550A
[ 0.787026] console [ttyS0] enabled
[ 0.791065] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud =
5062500) is a 16550A
[ 0.800411] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud =
5062500) is a 16550A
[ 0.816665] brd: module loaded
[ 0.823574] loop: module loaded
[ 0.827582] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for
/rdb/sata-phy@f0458100
[ 0.836750] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
[ 0.842821] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[ 0.860056] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0
x1 impl platform mode
[ 0.869036] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp sl
um part
[ 0.878148] scsi host0: brcm-ahci
[ 0.881744] scsi host1: brcm-ahci
[ 0.885228] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x1
00 irq 44
[ 0.893162] ata2: DUMMY
[ 0.895622] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[ 0.902587] libphy: Fixed MDIO Bus: probed
[ 0.907005] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.924397] libphy: bcmgenet MII bus: probed
[ 0.951373] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
[ 0.957231] e1000e: Copyright© 1999 - 2015 Intel Corporation.
[ 0.982198] ehci-brcm: EHCI BRCM driver
[ 0.986166] ehci-brcm f0470300.ehci: EHCI Host Controller
[ 0.991597] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus num
ber 1
[ 1.009304] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
[ 1.017873] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.021401] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[ 1.021948] hub 1-0:1.0: USB hub found
[ 1.021970] hub 1-0:1.0: 1 port detected
[ 1.022260] ehci-brcm f0470500.ehci: EHCI Host Controller
[ 1.022272] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus num
ber 2
[ 1.032384] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
[ 1.037395] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[ 1.037886] hub 2-0:1.0: USB hub found
[ 1.037928] hub 2-0:1.0: 1 port detected
[ 1.038150] ohci-brcm: OHCI BRCM driver
[ 1.038314] ohci-brcm f0470400.ohci: BRCM OHCI controller
[ 1.038327] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus num
ber 3
[ 1.038415] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
[ 1.096826] hub 3-0:1.0: USB hub found
[ 1.100614] hub 3-0:1.0: 1 port detected
[ 1.104799] ohci-brcm f0470600.ohci: BRCM OHCI controller
[ 1.110227] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus num
ber 4
[ 1.117894] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
[ 1.179781] hub 4-0:1.0: USB hub found
[ 1.183565] hub 4-0:1.0: 1 port detected
[ 1.187686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.194248] ehci-pci: EHCI PCI platform driver
[ 1.198759] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.204961] ohci-pci: OHCI PCI platform driver
[ 1.209755] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.215098] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 5
[ 1.222801] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 q
uirks 0x00010010
[ 1.231369] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
[ 1.237829] hub 5-0:1.0: USB hub found
[ 1.241621] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.248888] xhci-hcd f0471000.xhci: xHCI Host Controller
[ 1.254225] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus numb
er 6
[ 1.261807] usb usb6: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 1.270279] hub 6-0:1.0: USB hub found
[ 1.274063] hub 6-0:1.0: 2 ports detected
[ 1.278430] usbcore: registered new interface driver uas
[ 1.283834] usbcore: registered new interface driver usb-storage
[ 1.290346] mousedev: PS/2 mouse device common for all mice
[ 1.296150] i2c /dev entries driver
[ 1.299930] IR NEC protocol handler initialized
[ 1.304482] IR RC5(x/sz) protocol handler initialized
[ 1.309548] IR RC6 protocol handler initialized
[ 1.314094] IR JVC protocol handler initialized
[ 1.318636] IR Sony protocol handler initialized
[ 1.323267] IR SANYO protocol handler initialized
[ 1.327983] IR Sharp protocol handler initialized
[ 1.332702] IR MCE Keyboard/mouse protocol handler initialized
[ 1.338547] IR XMP protocol handler initialized
[ 1.343093] smssdio: Siano SMS1xxx SDIO driver
[ 1.347549] smssdio: Copyright Pierre Ossman
[ 1.352229] sdhci: Secure Digital Host Controller Interface driver
[ 1.358431] sdhci: Copyright© Pierre Ossman
[ 1.362801] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.371049] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[ 1.392605] hub 1-1:1.0: USB hub found
[ 1.396521] hub 1-1:1.0: 4 ports detected
[ 1.413404] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using A
DMA
[ 1.420984] hidraw: raw HID events driver © Jiri Kosina
[ 1.426594] usbcore: registered new interface driver usbhid
[ 1.432190] usbhid: USB HID core driver
[ 1.436613] NET: Registered protocol family 17
[ 1.441144] Key type dns_resolver registered
[ 1.445520] ThumbEE CPU extension supported.
[ 1.449810] Registering SWP/SWPB emulation handler
[ 1.460127] ALSA device list:
[ 1.463139] No soundcards found.
[ 1.467123] Waiting for root device /dev/mmcblk0p3...
[ 1.558475] mmc0: new high speed MMC card at address 0001
[ 1.564276] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
[ 1.568954] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
[ 1.575011] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
[ 1.581080] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
[ 1.590578] Alternate GPT is invalid, using primary GPT.
[ 1.595939] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.600805] usb 6-2: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.614935] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incomp
atibilities
[ 1.627314] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1.629323] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. O
pts: (null)
[ 1.629354] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 1.631360] devtmpfs: mounted
[ 1.631773] Freeing unused kernel memory: 344K
[ 1.631775] This architecture does not have kernel memory protection.
[ 1.661768] scsi host2: usb-storage 6-2:1.0
[ 1.718211] random: fast init done
[ 1.718427] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
[ 2.085853] hd51_1: loading out-of-tree module taints kernel.
[ 2.092887] usbcore: registered new interface driver tpm
[ 2.723001] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ
: 0 ANSI: 6
[ 2.731927] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.733411] sd 2:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/93
2 GiB)
[ 2.733766] sd 2:0:0:0: [sda] Write Protect is off
[ 2.733771] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.734156] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 4.117839] hd51: module_layout: kernel tainted.
[ 4.122521] Disabling lock debugging due to kernel taint
[ 5.380062] alloc_contig_range: [14800, 1ad00) PFNs busy
[ 5.746854] sda: sda1
[ 5.752623] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.021919] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
nodelalloc
[ 7.032720] Console: switching to colour frame buffer device 160x45
[ 7.341907] input: dreambox remote control (native) as /devices/virtual/input
/input0
[ 7.350155] input: dreambox advanced remote control (native) as /devices/virt
ual/input/input1
[ 7.496364] dvbdev: DVB: registering new adapter (dvb0)
[ 7.507597] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)..
.
[ 7.516581] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)..
.
[ 7.767343] input: front panel as /devices/virtual/input/input2
[ 7.788129] Registered IR keymap rc-cec
[ 7.792395] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 7.801268] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 7.855674] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[ 8.240714] Console: switching to colour dummy device 80x30
[ 9.079400] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, pat
ch: 1
[ 9.088752] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[ 9.190128] NET: Registered protocol family 10
[ 9.195283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.201291] Segment Routing with IPv6
[ 11.301312] random: crng init done
[ 14.056928] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow c
ontrol off
[ 14.065311] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.800436] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
[ 26.873085] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try
to load a firmware
[ 26.885124] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 27.111016] dib0700: firmware started successfully.
[ 27.624701] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 27.631893] dvb-usb: will pass the complete MPEG2 transport stream to the sof
tware demuxer.
[ 27.640940] dvbdev: DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 27.908917] usb 1-1.3: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC).
..
[ 28.143561] dib0070: DiB0070: successfully identified
[ 28.148698] Registered IR keymap rc-dib0700-rc5
[ 28.153749] input: IR-receiver inside an USB DVB receiver as /devices/platfor
m/f0470300.ehci/usb1/1-1/1-1.3/rc/rc1/input4
[ 28.167592] rc rc1: IR-receiver inside an USB DVB receiver as /devices/platfo
rm/f0470300.ehci/usb1/1-1/1-1.3/rc/rc1
[ 28.178551] dvb-usb: schedule remote query interval to 50 msecs.
[ 28.184620] dvb-usb: Hauppauge Nova-T Stick successfully initialized and conn
ected.
[ 28.192848] usbcore: registered new interface driver dvb_usb_dib0700
[ 60.417653] platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)..
.
root@ax:~#
0 leden, 1 bezoekers, 0 anonieme gebruikers
