Springen naar inhoud


Foto

VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse

OpenPLi7.0 vu+ wifi dongle uno4kse

  • Please log in to reply
Er zijn 40 reacties in dit onderwerp

#1 Malwurf

  • Member
  • 5 berichten

0
Neutral

Geplaatst op 15 mei 2019 - 22:29

Hello all,

I have a problem with VU+ Dual Band Wireless USB 2.0 Adapter in my  Vu+ uno4kse decoder and OpenPLi 7.0 stable version system.

 

When i go to the settings -> advanced settings -> network i don't see wlan settings, only lan.

 

I'm 100% sure that wifi dongle work fine.

 

here is my log from terminal after lsusb:

 

root@vuuno4kse:~# lsusb

Bus 003 Device 002: ID 0bda:0811

Bus 001 Device 001: ID 1d6b:0002

Bus 002 Device 001: ID 1d6b:0003

Bus 003 Device 001: ID 1d6b:0002

Bus 004 Device 001: ID 1d6b:0002

Bus 005 Device 001: ID 1d6b:0001

Bus 006 Device 001: ID 1d6b:0001

 

Please help me :)

Bijgevoegde Bestanden


Veranderd door Malwurf, 15 mei 2019 - 22:30


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #2 Trial

  • Senior Member
  • 1127 berichten

+34
Good

Geplaatst op 16 mei 2019 - 06:51

Hi,

are the driver for RTL8812au installed?

 

ciao



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #3 Malwurf

  • Member
  • 5 berichten

0
Neutral

Geplaatst op 16 mei 2019 - 08:29

Hello,

 

Thanks for answer. Can You tell me how to install this drivers?

On settings -> plugins -> drivers i don't have this driver to install.

RTL8812au is the correct driver for this dongle?



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #4 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 16 mei 2019 - 10:20

We don't have meta packages for wifi drivers.
 

You can either use the commandline to install them, or use the software manager, which has the option to see and install all available packages in the feed.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #5 Malwurf

  • Member
  • 5 berichten

0
Neutral

Geplaatst op 16 mei 2019 - 15:49

I've found RTL8812au driver the software manager, so thank you very very much!



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #6 Malwurf

  • Member
  • 5 berichten

0
Neutral

Geplaatst op 16 mei 2019 - 15:53

Maybe You can help me with another thing guys? i have a qwerty remote for this decoder and.... the qwerty part not work. Do i need additional drivers for that? What is the name of this driver ?

pilot-vu-pilot-z-klawiatura_129700.jpg



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #7 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 16 mei 2019 - 16:26

I guess this RC is connected via Bluetooth? If yes, you first must connect the box with this RC. I don’t know by heart whether the Uno 4Kse also has BT.

Just checked. Default no BT. VU+ Bluetooth 4.1 USB Dongle

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #8 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 16 mei 2019 - 16:31

Concerning the WIFI dongle. I recently installed an original WIFI dongle with external aerial on a Uno 4Kse and this worked out of the box.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #9 Trial

  • Senior Member
  • 1127 berichten

+34
Good

Geplaatst op 16 mei 2019 - 16:48

Hi,

this seems to be the old IR remote with keyboard on back. In former boxes/driver the keyboard part worked as soon as you pressed the open lock button on the bottom left. I do not know if new boxes are still supporting it.

 

ciao



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #10 Malwurf

  • Member
  • 5 berichten

0
Neutral

Geplaatst op 16 mei 2019 - 19:59

Hi,

this seems to be the old IR remote with keyboard on back. In former boxes/driver the keyboard part worked as soon as you pressed the open lock button on the bottom left. I do not know if new boxes are still supporting it.

 

ciao

 

Yes this is IR remote. When I click open lock and try to write something I get big "X" icon in top right corner on the screen.



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #11 Frenske

  • Forum Moderator
    PLi® Core member
  • 27380 berichten

+393
Excellent

Geplaatst op 16 mei 2019 - 22:31

I wouldn‘t know it too as I never ever owed a device like this. Sorry I can‘t be more helpfull.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #12 Erik Slagter

  • PLi® Core member
  • 46951 berichten

+541
Excellent

Geplaatst op 17 mei 2019 - 09:24

The qwerty part won't and can't work due to the way VU+ has implemented it.

 

AFAIK it's has been a long time ago that this remote control was sold.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #13 ArtiNI

  • New Member
  • 3 berichten

0
Neutral

Geplaatst op 11 juli 2019 - 17:57

I've found RTL8812au driver the software manager, so thank you very very much!

 

Hi guys,

 

I have been having a issue trying to get my WiFi dongle to work with OpenPLi . As above the chipset is RTL8812AU . 

The dongle itself is GigaBlue usb wifi adapter dual band 600mbps and my receiver is Formuler F1 . 

 

I can get it to work on OpenATV however I very much prefer OpenPLi . I would greatly appreciate your help on this. 

@Malwurf how did you do it exactly ? 

 

I have tried both 6.2 and 7.0 however I'd prefer to use 6.2 since I couldn't get mgcamd to work with 7.0

 

Thanks in advance for all replies.



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #14 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 11 juli 2019 - 18:04

And 7.1? And try oscam?

Veranderd door littlesat, 11 juli 2019 - 18:05

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #15 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 11 juli 2019 - 18:57

Oscam? For a wifi stick? ;)

 

@ArtiNI,

 

Unlike other images we don't preload the image with all sort of drivers virtually nobody needs, so you need to install it.

 

On  the commandline:

opkg install rtl8812au

or use plugins, software management, advanced options, package management, and select it from the list.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #16 ArtiNI

  • New Member
  • 3 berichten

0
Neutral

Geplaatst op 13 juli 2019 - 08:16

Hi, 

 

So I did give it a try and followed the above instructions.

 

Currently I'm on OpenPLi 7.1 stable and my wifi dongle works! 

 

Thank you so much guys!

 

I have ran into another problem. The box does not recognise my HDD. It worked ok on OpenPLi 6.2 and OpenATV so it's not a hardware issue.

 

Would be grateful for another advise. It's probably something simple as well 

 

Many Thanks!



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #17 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 13 juli 2019 - 14:58

Is your HDD Internal? External? eSATA or USB?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #18 ArtiNI

  • New Member
  • 3 berichten

0
Neutral

Geplaatst op 13 juli 2019 - 23:09

Sorry , should have mentioned.

It's external USB

Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #19 WanWizard

  • PLi® Core member
  • 68309 berichten

+1719
Excellent

Geplaatst op 14 juli 2019 - 13:33

USB devices are mounted on /media/usb. So if you have /media/hdd defined somewhere, it won't work.

 

OpenPLi doesn't need this hardcoding, like other images, it can find the disk and use it, no matter where it is mounted.

 

So make sure there is no hardcoding: menu - setup - system - expert settings - recording paths, and either use "<default movie location>" or /media/usb (if you want to define it explicitly).


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #20 serdeliuk

  • Senior Member
  • 315 berichten

+18
Neutral

Geplaatst op 13 maart 2020 - 19:17

Maybe You can help me with another thing guys? i have a qwerty remote for this decoder and.... the qwerty part not work. Do i need additional drivers for that? What is the name of this driver ?

 

 

Hi @Malwurf , did you managed to put this remote control to work? They still sold this remote control and should be compatible with a lot of new and old models. Probably enigma2 is not yes prepared for qwerty :)

Please install evtest on your stb box and from shell run "init 2" without quotes to shutdown enigma2 and free the input device, then run evtest, select the right event device (usually 0) and then enable the keyboard, you should see all keypresses on the evtest output. At the end run "init 3" to start back the enigma2, or type reboot


Veranderd door serdeliuk, 13 maart 2020 - 19:21

init 2 && init 3




Also tagged with one or more of these keywords: OpenPLi7.0, vu+, wifi dongle, uno4kse

1 gebruiker(s) lezen dit onderwerp

0 leden, 1 bezoekers, 0 anonieme gebruikers