Springen naar inhoud


Foto

VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222)


  • Please log in to reply
Er zijn 107 reacties in dit onderwerp

#1 nemosince1996

  • Senior Member
  • 79 berichten

0
Neutral

Geplaatst op 24 juli 2019 - 12:14

I use VU+ Ultimo 4K from time it appeared on a market with configutation 2x DVB-S2 (45208 FBC) and DVB-T2 (TT3L10). Everything is running as it should with some smaller problems during time.
Now I have bought another VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222).

I found two problems after flashing OpenPLI 7.1:

1) DVB-T2 MTSIF was recognized and running but after each restart of box both tuners were disabled. I had to enable them all the time. I flashed OpenPLI 7.0 and problem disappeared even if I upgraded back to 7.1. The only one thing which remains is black screen after 2-3 seconds after switching to dvb-t2 channel for several seconds. Later the picture is stable.

2) More serious problem is with DVB-S2 (AVL6222) for universal LNB's in position 3 (old socket type). Tuners are recognized as FBC tuners and they cannot be set correctly. There must be wrong data in tuner configuration.

Can somebody check configuration files, eventually to place here where and what to change DVB-S2 (AVL6222) tuners would run? Thanks in advance.

 

 

Bijgevoegde Bestanden



Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #2 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 13:38

How can you put a normal dual tuner in the middle slot... post the file /proc/bus/nim_sockets here... (from both boxes)
VU is currently doing a wierd thing... with latest drivers it creates too many directories in /proc/stb/frontend which confuses the nimmanager... it also creates dirs there for tuners that do not exist!

Veranderd door littlesat, 24 juli 2019 - 13:48

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #3 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 13:44

And but the dvb-s2x tuner in the second slot...

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #4 nemosince1996

  • Senior Member
  • 79 berichten

0
Neutral

Geplaatst op 24 juli 2019 - 14:17

I do not how you find that I put tuners wrong. It is not possible physically because of different type of sockets.

 

Slot 1 (tuner A on the back side of box): DVB-S2x (45308X FBC)       - FBC connector, tuners A-H, standard position when you buy this box

Slot 2 (tuner B on the back side of box): DVB-T2 MTSIF (BCM3466)  - FBC connector, tuners I,J

Slot 3 (tuner C on the back side of box): DVB-S2 (AVL6222)               - old type long black socket, tuners K,L

 

Is it clear now? I need help, what to change to be able configure DVB-S2 (AVL6222) correctly and to use it. I am not an expert. Mybe OpenPLI team could issue it in next update but I would prefer to solve it quicker.

 

There are empty nim_sockets files in both boxes.



Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #5 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 14:25

The file nim_sockets must be there... without your box will not recognize any tuner.
The tuner with fbc connector which is in fact a double tuner is new to me and I can understand why the last tuner might be confused (sounds for fbc tuner I need to add an extra
check for if previous tuner or the mod 8 tuner is an fbc tuner and then also when you mix them the fbc must always be in first slot)

Veranderd door littlesat, 24 juli 2019 - 14:30

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #6 Dimitrij

  • PLi® Core member
  • 9963 berichten

+334
Excellent

Geplaatst op 24 juli 2019 - 14:29

In telnet(putty):

cat  /proc/bus/nim_sockets

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #7 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 14:34

When you go from openpli 7.0 to 7.1 you indeed need to reconfigure each multi or combined tuner as the configs are changed for these... the duo tuner in fbc slot is a which leads to the 3rd tuner recognized as fbc is a different issue (and needs adaption in code)

Veranderd door littlesat, 24 juli 2019 - 14:34

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #8 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 14:39

Then issue with fbc recognition is 100% sure a driver ‘issue’ as fbc_id in the /proc/stb/fronting dir must be there... I can work-a-round it by checking for this file in the first root tuner.
But still it is a stupid thing and I’m not sure if other code might be confused due to this.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #9 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 14:51

I also need the output from
ls /proc/stb/frontend/7

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #10 nemosince1996

  • Senior Member
  • 79 berichten

0
Neutral

Geplaatst op 24 juli 2019 - 16:05

Asked files

Bijgevoegde Bestanden



Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #11 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 16:09

Van welke box zijn die... want hier zie ik totaal die nieuwe tuner niet in.... dit moet gewoon goed gaan. Dit is denk ik van je eerste box.... in nim_sockets zit wel wat vreemds maar dat komt denk ik meer door her copy en pasten. Dit zijn twee fbc dvb-s2 tuners en een c/t multy duo tuner.
In de frontend dir zit op 7 een fbc_id file... je eerste box moet nu goed en perfect zijn!!!! Dat is denk ik meer de Instellingen die handmadig aangepast moest worden.

Veranderd door littlesat, 24 juli 2019 - 16:13

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #12 nemosince1996

  • Senior Member
  • 79 berichten

0
Neutral

Geplaatst op 24 juli 2019 - 16:15

Now for new box, previous files were for old one

Bijgevoegde Bestanden



Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #13 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 16:20

kan je
ls /proc/stb/frontend/8
En dan ook 9, 10, 11 ook geven. Ik hoop dat dan in 8 geen fbc_id staat. Allleen dan is er omheen te werken...
Sorry met 7 had ik me vertelt... dat was de 8e van de 1e fbc tuner.
Ook ff gefixt hebben daar ik pas morgen avond of vrijdag een oplossing kan maken

Veranderd door littlesat, 24 juli 2019 - 16:25

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #14 WanWizard

  • PLi® Core member
  • 68303 berichten

+1718
Excellent

Geplaatst op 24 juli 2019 - 16:30

English !


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #15 nemosince1996

  • Senior Member
  • 79 berichten

0
Neutral

Geplaatst op 24 juli 2019 - 16:33

Sorry, littlesat, I do not know dutch. We are on EN section. Anyway I use Google translator.

Bijgevoegde Bestanden



Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #16 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 16:35

I cannot solve it... vu need to solve this! Driver issue. They put 18 frontend procs and the first 16!has fbc_id

Veranderd door littlesat, 24 juli 2019 - 16:37

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #17 nemosince1996

  • Senior Member
  • 79 berichten

0
Neutral

Geplaatst op 24 juli 2019 - 17:13

Does it mean really that there is no choice how to change it? Only VU team can? But strange is that when I tried OpenATV image it is ok in it and dvb-s2 tuner is correctly recognized and I was able to setup what I needed. I expect that drivers are the same for both images. But I need OpenPLI because you have the best configuration and control of FBC DVB-S2(x) tuners. Thank you for your effort. I can use this box so far the same way as Solo2 which I replaced and to wait for repair.



Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #18 WanWizard

  • PLi® Core member
  • 68303 berichten

+1718
Excellent

Geplaatst op 24 juli 2019 - 17:26

Yes, I've checked, we have the same drivers as OpenATV.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #19 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 19:39

Were the frontend dirs from the first or second box? When it was from the first box we still might have a solution.
Openatv is willing to create dirty work-a-rounds in their image to fix things instread or trying to arrange it the right way with vu.
Can you give a ‘cat’ of the fbc_id file? Maybe the content is different...

Veranderd door littlesat, 24 juli 2019 - 19:42

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Ultimo 4K with DVB-S2x (45308X FBC), DVB-T2 MTSIF (BCM3466) and DVB-S2 (AVL6222) #20 littlesat

  • PLi® Core member
  • 56123 berichten

+685
Excellent

Geplaatst op 24 juli 2019 - 19:45

Regarding the second box openatv has the same
Checks to verify for fbc tuner as we have https://github.com/o...s/NimManager.py so when they have the same drivers and the procs are coming from the drivers they should have the same issue... please ensure the last data was from the second box!
When something in the bsp layer creates these procs it might to be solved in the bsps

Veranderd door littlesat, 24 juli 2019 - 19:46

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W



1 gebruiker(s) lezen dit onderwerp

0 leden, 1 bezoekers, 0 anonieme gebruikers