Hi littlesat,
thanks - found it;
https://github.com/O...11424335fd0317e
now i can go in menu -> settings -> flash image without crash.
here it needs ca. 2 minutes till this menu is open, but i think this is another problem here, i found in dmesg that;
<3>[ 4702.508278] ata1.00: exception Emask 0x10 SAct 0xf SErr 0xd80000 action 0x6 frozen
<3>[ 4702.515892] ata1.00: irq_stat 0x08000000, interface fatal error
<3>[ 4702.522042] ata1: SError: { 10B8B Dispar Handshk LinkSeq }
<3>[ 4702.527564] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 4702.532890] ata1.00: cmd 61/00:00:10:5b:23/04:00:15:00:00/40 tag 0 ncq 524288 out
<3>[ 4702.532890] res 40/00:04:10:5b:23/00:00:15:00:00/40 Emask 0x10 (ATA bus error)
<3>[ 4702.548460] ata1.00: status: { DRDY }
<3>[ 4702.552366] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 4702.557648] ata1.00: cmd 61/00:08:10:5f:23/04:00:15:00:00/40 tag 1 ncq 524288 out
<3>[ 4702.557648] res 40/00:04:10:5b:23/00:00:15:00:00/40 Emask 0x10 (ATA bus error)
<3>[ 4702.573314] ata1.00: status: { DRDY }
<3>[ 4702.577012] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 4702.582372] ata1.00: cmd 61/00:10:10:63:23/04:00:15:00:00/40 tag 2 ncq 524288 out
<3>[ 4702.582372] res 40/00:04:10:5b:23/00:00:15:00:00/40 Emask 0x10 (ATA bus error)
<3>[ 4702.597924] ata1.00: status: { DRDY }
<3>[ 4702.601739] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 4702.606989] ata1.00: cmd 61/00:18:10:67:23/04:00:15:00:00/40 tag 3 ncq 524288 out
<3>[ 4702.606989] res 40/00:04:10:5b:23/00:00:15:00:00/40 Emask 0x10 (ATA bus error)
<3>[ 4702.622504] ata1.00: status: { DRDY }
<6>[ 4702.626321] ata1: hard resetting link
<6>[ 4702.898255] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<6>[ 4702.917532] ata1.00: configured for UDMA/133
<6>[ 4702.922030] ata1: EH complete
<3>[ 4712.685278] ata1.00: exception Emask 0x10 SAct 0x4000001f SErr 0xd80000 action 0x6 frozen
<3>[ 4712.693489] ata1.00: irq_stat 0x08000000, interface fatal error
<3>[ 4712.699429] ata1: SError: { 10B8B Dispar Handshk LinkSeq }
<3>[ 4712.704939] ata1.00: failed command: WRITE FPDMA QUEUED
maybe that is the reason (drive or sata-cable) for the problem or openmultiboot, but i don't know.
anyway if i start the gui (enigma2) new, it also needs often a long time till tv-picture is coming again, but not always (sometimes it needs only a few seconds).
regards
Pike
Edited by Pike_Bishop, 6 August 2019 - 19:55.