Springen naar inhoud


Foto

Dm8000 openpli7 bestaat er een plugin die de hdd uitleest mbt het aantal uren powerup bijv ?


  • Please log in to reply
Er zijn 4 reacties in dit onderwerp

#1 birdybird

  • Senior Member
  • 376 berichten

+5
Neutral

Geplaatst op 28 augustus 2019 - 11:04

Ik zoek eigenlijk een plugin die de hd uitleest
Mbt het aantal uren dat hij powerup is een soort smart utility. Bestaat die ?

Re: Dm8000 openpli7 bestaat er een plugin die de hdd uitleest mbt het aantal uren powerup bijv ? #2 WanWizard

  • PLi® Core member
  • 68303 berichten

+1718
Excellent

Geplaatst op 28 augustus 2019 - 12:59

Ja. En die tool heet ook nog eens smart. ;)

root@vuduo4k:~# opkg install smartmontools
Installing smartmontools (5.42) on root
Downloading http://xxxxx/feeds/openpli-develop/armv7ahf-neon/smartmontools_5.42-r1.0.1_armv7ahf-neon.ipk.
Configuring smartmontools.

root@vuduo4k:~# smartctl -a /dev/sdb
smartctl 5.42 2011-10-20 r3458 [armv7l-linux-4.1.45-1.17] (local build)
Copyright (C) 2002-11 by Bruce Allen, [url=http://smartmontools.sourceforge.net]http://smartmontools.sourceforge.net[/url]
 
=== START OF INFORMATION SECTION ===
Device Model:     ST1500LM006 HN-M151RAD
Serial Number:    S35UJ9AFA04664
LU WWN Device Id: 5 0004cf 20e4d6a63
Firmware Version: 2BC10001
User Capacity:    1,500,301,910,016 bytes [1.50 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Wed Aug 28 13:00:51 2019 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection: (17520) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time: (   2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities:        (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
 
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       2
  2 Throughput_Performance  0x0027   252   252   000    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0023   091   090   025    Pre-fail  Always       -       2872
  4 Start_Stop_Count        0x0032   093   093   000    Old_age   Always       -       7774
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002f   252   252   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   252   252   015    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       10627
 10 Spin_Retry_Count        0x0033   252   252   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       981
181 Program_Fail_Cnt_Total  0x0022   100   100   000    Old_age   Always       -       5727823
183 Runtime_Bad_Block       0x0032   252   252   010    Old_age   Always       -       0
184 End-to-End_Error        0x0033   252   252   097    Pre-fail  Always       -       0
186 Unknown_Attribute       0x0032   252   252   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   252   252   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   252   252   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0002   070   052   040    Old_age   Always       -       30 (Min/Max 13/48)
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       29
192 Power-Off_Retract_Count 0x0022   100   100   000    Old_age   Always       -       468
193 Load_Cycle_Count        0x0032   025   025   000    Old_age   Always       -       757828
194 Temperature_Celsius     0x0002   064   052   000    Old_age   Always       -       30 (Min/Max 13/48)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       136
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      5026         -
# 2  Offline             Interrupted (host reset)      90%      4380         -
# 3  Extended captive    Self-test routine in progress 90%      4380         -
# 4  Extended offline    Aborted by host               90%      4380         -
# 5  Short offline       Completed without error       00%         6         -
 
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
root@vuduo4k:~#

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Dm8000 openpli7 bestaat er een plugin die de hdd uitleest mbt het aantal uren powerup bijv ? #3 birdybird

  • Senior Member
  • 376 berichten

+5
Neutral

Geplaatst op 29 augustus 2019 - 09:38

Bij mij heet tie niet afb. Hoe kom ik erachter hoe die wel heet ?

Re: Dm8000 openpli7 bestaat er een plugin die de hdd uitleest mbt het aantal uren powerup bijv ? #4 birdybird

  • Senior Member
  • 376 berichten

+5
Neutral

Geplaatst op 29 augustus 2019 - 09:50

Ik heb het gevonden bedankt.
Blkid

Re: Dm8000 openpli7 bestaat er een plugin die de hdd uitleest mbt het aantal uren powerup bijv ? #5 WanWizard

  • PLi® Core member
  • 68303 berichten

+1718
Excellent

Geplaatst op 29 augustus 2019 - 15:32

Ik heb meerdere devices aangesloten.

 

Het is altijd random welke als eerste gevonden wordt en "sda" genoemd wordt, in dit geval was mijn USB stick sda, en mijn lokale disk sdb.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.



1 gebruiker(s) lezen dit onderwerp

0 leden, 1 bezoekers, 0 anonieme gebruikers