Hello there,
i just bought a
Vu+ Uno4K SE and put OpenPLi because of my favorite image
Firmware version: OpenPLi 7.2-rc (2019-11-20-rc)
Kernel / Drivers: 4.1.20 / 4.1.20-20190424.r0.1
I use also an SSD Drive witch i used in previous box just mounted in the new one.
Now what i saw after some testings that the LAN 1Gbit port running well ... if i Copy from box to my PC i am able to copy with 110MByte/sec this is cool.
If i upload to box from my PC i reach 90Mbyte/sec witch is also cool.
The problem i am facing with is when i Copy to box i got packers in error(s) and this only if i Copy to it if i am Copying from the errors: stays at 0.
root@vuuno4kse:~# ifconfig
eth0 Link encap:Ethernet HWaddr xx:xD:Ex:x4:x6:xx
inet addr:192.168.88.204 Bcast:192.168.88.255 Mask:255.255.255.0
inet6 addr: fe80::21d:ecff:fe14:b634%lo/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12715029 errors:2050 dropped:2608 overruns:0 frame:0
TX packets:5496586 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:326568296 (311.4 MiB) TX bytes:3723057894 (3.4 GiB)
I have a Miktorik Router and monitored the tx and rx packets and there is now errors showing up.
Cable issue couldn't be if there no error when download ... (using cat7 cable).
Maybe to mention that i have also a conax cam stick in the CI, i don't know if that can causing problems like this.
Maybe someone else can also test.
King Regards.