Forums

Hi, I just bought 2 edision mio 4k, installed openpli 7.2, use oscam and I have these problems:

1) from local card (tvsat) every 30/40 minutes at the exchange of ecm freeza or freezes ..
2) even if the dtt signal is 98/100% at the switch sat > dtt for ten seconds tuner error or freeza ..  then it works well

things that with the dm800se, openpli 4, tuner dtt and dvb s2 I don't have these problems . is a 7.2 bug?
thank you

For the OScam you probably need to adjust the settings about the clocking of the card. The automatic mode is for mipsel box only.
Yours is ARM so you need to define the MHz properly.

can you tell me how many mhz should i set it?
this is my current configuration

 

 

label                         = TvSat
protocol                      = internal
device                        = /dev/sci0
autospeed                     = 0
fallback                      = 1
caid                          = 183D
rsakey                        = XYZZZZZZZ
ecmwhitelist                  = 91
ecmheaderwhitelist            = 80308ED387,81308ED387
detect                        = cd
mhz                           = 540
cardmhz                       = 2700
ident                         = 183D:000000,005411
group                         = 2
emmcache                      = 1,2,2

Give a try to 450 value but I should advice to have a look on streamboard.tv the home of OScam to find the proper value for your card and STB.

working configuration, tks

 

label = TvSat

protocol = internal

device = /dev/sci0

caid = 183D

rsakey = XYZ

ecmwhitelist = 91

ecmheaderwhitelist = 80308ED387,81308ED387

detect = cd

ident = 183D:000000,005411

group = 2

emmcache = 1,3,2

auprovid = 005411