usb tuner do not work well
Zolyma 28 jan 2020
Hi!
vu+ uno4k se, openpli7.2.
I bought an usb tuner like this: https://www.aliexpre...1762667746.html i installed the driver from feed: rtl2832, but i only see dvb-t/t2.
there is no dvb c and i need only the dvb c.
How can i make it work right? Or this is not possible yet?
Zolyma 28 jan 2020
Find the correct driver?
I installed all drivers from feed, but only just t/t2 work the c not!
WanWizard 28 jan 2020
No, where can i find?
No clue, you bought some non-descript chinese stick, who knows what hardware is inside it, and whether or not there is any linux support for it at all (the web page doesn't mention it).
Start by telling us the USB ID of the device.
Zolyma 28 jan 2020
No, where can i find?
No clue, you bought some non-descript chinese stick, who knows what hardware is inside it, and whether or not there is any linux support for it at all (the web page doesn't mention it).
Start by telling us the USB ID of the device.
Where can i find, watch it?
Zolyma 28 jan 2020
No, where can i find?
No clue, you bought some non-descript chinese stick, who knows what hardware is inside it, and whether or not there is any linux support for it at all (the web page doesn't mention it).
Start by telling us the USB ID of the device.
maybe:
https://discourse.os...ebay/20164.html
Veranderd door Zolyma, 28 januari 2020 - 14:14
WanWizard 28 jan 2020
Where can i find, watch it?
Login to the box, type the command "lsusb", and post the result here.
Zolyma 28 jan 2020
Bus 002 Device 002: ID 05e3:0626
Bus 003 Device 002: ID 05e3:0610
Bus 004 Device 002: ID 15f4:0131
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 003 Device 003: ID 0403:6001
Bus 003 Device 004: ID 076b:3021
Bus 003 Device 005: ID 090c:1000
usb1: tuner
usb2: hub-pendrive,pcscreader,phoenix reader.
Veranderd door Zolyma, 28 januari 2020 - 14:33
WanWizard 28 jan 2020
15f4:0131 looks like an Astrometa.
From what I understand, you need both:
opkg install enigma2-plugin-drivers-dvb-usb-rtl2832 opkg install kernel-module-mn88473
you need the panasonic firmware:
cd /lib/firmware wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88473/01/latest/dvb-demod-mn88473-01.fw
after which you have to reboot.
And chances are it will still not work, Astrometa kernel support was very flaky until recently, and VU+ boxes run on a pretty old kernel version.
There are some other topics on this forum about Astrometa, perhaps those may provide some pointers...
Zolyma 28 jan 2020
root@vuuno4kse:~# opkg install kernel-module-mn88473
Couldn't find anything to satisfy 'kernel-module-mn88473'.
No packages installed or removed.
root@vuuno4kse:~#
root@vuuno4kse:~# cd /lib/firmware
root@vuuno4kse:/lib/firmware# wget http://palosaari.fi/...dvb/firmware/MN
88473/01/latest/dvb-demod-mn88473-01.fw
Connecting to palosaari.fi (91.232.156.81:80)
wget: can't open 'dvb-demod-mn88473-01.fw': File exists
root@vuuno4kse:/lib/firmware#
Veranderd door Zolyma, 28 januari 2020 - 16:15
WanWizard 28 jan 2020
No, because of these issues we tend to avoid USB devices like the plague...