I test Openpli 6.2, 7.2 (boxes: vu+, formuler, qviart ....)
I have installed oscam and openvpn from the feed. I only have proxy readers in oscam
[reader] label = loc_ovpn protocol = cccam device = openvpn_ip,12222 user = name password = pass inactivitytimeout = 60 reconnecttimeout = 120 group = 1 cccversion = 2.2.1 cccmaxhops = 2 ccckeepalive = 1 cccreshare = 1 [reader] label = loc protocol = cccam device = public_ip,12222 user = name password = pass inactivitytimeout = 60 fallback = 1 group = 1 cccversion = 2.2.1 cccmaxhops = 2 cccreshare = 1
Proxy loc is fallback. Every time I turn on the box, reader loc_ovpn is an error
1970/01/01 01:00:19 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11572 (mipsel-oe-linux) 1970/01/01 01:00:19 00000000 s (main) System name = Linux 1970/01/01 01:00:19 00000000 s (main) Host name = formuler4turbo 1970/01/01 01:00:19 00000000 s (main) Release = 4.10.6 1970/01/01 01:00:19 00000000 s (main) Version = #1 SMP Tue Dec 10 18:14:03 CET 2019 1970/01/01 01:00:19 00000000 s (main) Machine = mips 1970/01/01 01:00:19 00000000 s (main) Stb model = dm800se 1970/01/01 01:00:19 00000000 s (main) Stb boxtype = formuler4turbo 1970/01/01 01:00:19 00000000 s (main) The current system time is smaller than the build date (Dec 16 2019). Waiting up to 0 seconds for time to correct 1970/01/01 01:00:20 00000000 s (main) Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version. 1970/01/01 01:00:20 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 445 1970/01/01 01:00:20 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 1970/01/01 01:00:20 00000000 s (main) signal handling initialized 1970/01/01 01:00:20 00000000 s (config) 176 service-id's loaded in 8 ms 1970/01/01 01:00:20 00000000 s (net) monitor: initialized (fd=6, port=989) 1970/01/01 01:00:20 00000000 s (net) cccam: initialized (fd=7, port=12013) 1970/01/01 01:00:20 00000000 s (reader) loc_ovpn [cccam] creating thread for device 10.8.0.1 1970/01/01 01:00:20 00000000 s (reader) loc [cccam] creating thread for device public_ip 1970/01/01 01:00:20 00000000 s (main) waiting for local card init 1970/01/01 01:00:20 469CE06B p (reader) 10.8.0.1: resolved ip=10.8.0.1 1970/01/01 01:00:20 469CE06B p (reader) loc_ovpn [cccam] connecting to 10.8.0.1:12222 1970/01/01 01:00:20 1CAD7C0A p (reader) public_ip: resolved ip=xx.xx.xx.xx 1970/01/01 01:00:20 1CAD7C0A p (reader) loc [cccam] connecting to public_ip:12222 1970/01/01 01:00:20 1CAD7C0A p (reader) loc [cccam] proxy initialized, server public_ip:12222 1970/01/01 01:00:20 1581DD37 h (webif) webif: decompressed 171152 bytes back into 419256 bytes 1970/01/01 01:00:20 1581DD37 h (webif) HTTP Server running. ip=:: port=8888 1970/01/01 01:00:21 00000000 s (main) init for all local cards done 1970/01/01 01:00:21 48F50BA8 c (client) plain dvbapi-client granted (dvbapiau, au=auto (4 reader)) 1970/01/01 01:00:21 48F50BA8 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache 1970/01/01 01:00:21 48F50BA8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64) 1970/01/01 01:00:21 48F50BA8 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 7 1970/01/01 01:00:21 48F50BA8 c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket... 1970/01/01 01:00:21 48F50BA8 c (dvbapi) socket connect error (errno=2 No such file or directory) 1970/01/01 01:00:22 48F50BA8 c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket... 1970/01/01 01:00:22 48F50BA8 c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 14) 1970/01/01 01:00:23 469CE06B p (reader) loc_ovpn [cccam] connect failed: Connection timed out 1970/01/01 01:00:23 469CE06B p (reader) loc_ovpn [cccam] proxy initialized, server 10.8.0.1:12222 1970/01/01 01:00:36 469CE06B p (reader) loc_ovpn [cccam] connecting to 10.8.0.1:12222 1970/01/01 01:00:39 469CE06B p (reader) loc_ovpn [cccam] connect failed: Connection timed out 1970/01/01 01:00:42 48F50BA8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0668 ECM_PID: 1468 PROVID: 000000 1970/01/01 01:00:42 48F50BA8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0624 ECM_PID: 1486 PROVID: 000000 1970/01/01 01:00:42 48F50BA8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 14C2 PROVID: 051910 1970/01/01 01:00:42 48F50BA8 c (dvbapi) Demuxer 0 found 3 ECM pids and 2 STREAM pids in CA PMT 1970/01/01 01:00:42 48F50BA8 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1 1970/01/01 01:00:42 48F50BA8 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1486 ANY CHID PMTPID 138C VPID 1396 1970/01/01 01:00:42 48F50BA8 c (ecm) dvbapiau (0624@000000/0000/1328/55:0AA239EDD9505E1350E25696B65DFC42): found (8 ms) by loc 1970/01/01 01:00:44 48F50BA8 c (ecm) dvbapiau (0624@000000/0000/1328/55:5DD3EB4596D961C50D06199CC95CECF1): found (133 ms) by loc 2020/02/27 10:12:34 1CAD7C0A p (reader) loc [cccam] disconnected: reason inactivity 2020/02/27 10:12:44 1CAD7C0A p (reader) loc [cccam] connecting to public_ip:12222 2020/02/27 10:12:49 48F50BA8 c (ecm) dvbapiau (0624@000000/0000/1328/55:A11FC9BE85A38C17E581FC94BDAEE053): timeout (5002 ms) by loc 2020/02/27 10:12:54 48F50BA8 c (ecm) dvbapiau (0624@000000/0000/1328/55:A11FC9BE85A38C17E581FC94BDAEE053): found (4900 ms) by loc 2020/02/27 10:12:54 48F50BA8 c (ecm) dvbapiau (0624@000000/0000/1328/55:A499BB053B685125122F10CF3027ECD5): found (99 ms) by loc
I want it to work like this:
After the box starts, both readers will connect and after some time the reader loc (fallback) will disconnect.
Just as I wrote it works in Openpli 4.
In openpli 6.2 and 7.2, after the start of box reader loc_ovpn is always an error. When I restart the reader or oscam, it works, but that's not the solution
Veranderd door gusto, 27 februari 2020 - 10:31