Hi here,
I was about to cut some recordings but I'm facing a small (?) issue.
The cut can't be done because : "Impossible to open the entry file .ap"
Could you let me know if I could do something ?
Thanks in advance !
Posted 3 April 2020 - 12:40
Where and how do you get that message? I can't find it anywhere in the source code...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 April 2020 - 19:08
Hi,
I used that plugin and thanks to it I could cut back
However it doesn't reconstruct all .ap files I wished it had. Any idea why ?
@WanWizard, I had this message this way : PVR>HDD movies>Selectedfile.ts>Menu>...
Here are some screenshots :
Edited by polkwan, 4 April 2020 - 19:09.
Posted 4 April 2020 - 19:30
I'd like to add the following information :
- With those "unreconstructable" .ts files I'm quite stacked ; Impossible to transfer those files back to an external drive by ftp. I noticed that videos transfer wel until they arrive at the time where the .ts is freezing for a sec. And the transfer stops at that moment. On my external device I get then a file that stops at that moment whilst I can watch it entirely on the stb.
I've got the feeling that if I could reconstruct the .ap file I could edit and cut this .ts file at the moment that seems to be the cause of this issue. Not 100% sure though...
Posted 10 April 2020 - 21:23
Yes I had the same issue recently, not just with pli but other images too. Never had this problem before with my old vu solo2 but started when I changed to the 4k gigablue (ARM). But luckily, as ims pointed ut above, the reconstructapsc plugin will sort this issue .
Vu+ Solo2, H-H 100 Stab Motor
Posted 11 April 2020 - 09:22
As information I would like to say that it is possible to plat ts files without any other associated files. I'm unsure about the situation above, but if the problem is with any of the other files. Try to have only the ts file. For example by copy the ts file to another name and play that file.
May I ask a question little associated with the subject:
Is it any good Linux (Ubuntu) application with GUI that can cut TS files?
Important that the video/audio packets isn't transcoded, they should be left untouched.
Posted 13 April 2020 - 13:10
Yes I had the same issue recently, not just with pli but other images too. Never had this problem before with my old vu solo2 but started when I changed to the 4k gigablue (ARM). But luckily, as ims pointed ut above, the reconstructapsc plugin will sort this issue .
the reconstructapsc plugin doesn't reconstruct the .ap files of the TS that I just mentionned. It reconstructs it wel for all the other TS but not those which are untransferrable...
Posted 13 April 2020 - 13:16
Try to have only the ts file. For example by copy the ts file to another name and play that file.
I tried. I can not trasfer the TS file entirely. It always stops transferring at the stage where there's a glitch in that TS.
As a matter of fact, I see the full (like 4Go) TS in hdd/media/movie but when I want to copy that file anywhere else it turns out into a 2,6Go TS because the copy stops at the time where is that glitch...
Posted 13 April 2020 - 13:41
Smells like disk corruption, which aborts the copy due to read errors...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 April 2020 - 19:59
Don't know. Enigma might simply skip it?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 15 April 2020 - 11:54
Here you go. Sorry for the long log, I'm not able to know what's relevant...
root@dm8000:~# dmesg >set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) 147 ms: 89 71 ms: 90 161 ms: 90 922 ms: 91 NFS: bad mount option value specified: vers=4.2 NFS: bad mount option value specified: vers=4.1 NFS: bad mount option value specified: vers=4.0 2007 ms: 93 46 ms: 99 9 ms: 99 8 ms: 100 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 set mute 1 (000) 1 set input to 1 set fb to 2(2) set sb to 3(0) Write AVS: 40 41 00 00 00 00 0a 72 00 06 00 00 00 ff CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: Error connecting to socket. Aborting operation EXT4-fs (sda1): error count since last fsck: 80 EXT4-fs (sda1): initial error at time 1485296840: ext4_read_block_bitmap:394 EXT4-fs (sda1): last error at time 1533847636: ext4_mb_discard_group_preallocat: 3744 bcm4506: channel 0 is in normale mode now bcm4506: channel 0 is sleeping now tda: init complete set input to 0 set fb to 2(0) using 50.00Hz as MonitorRefreshRate SET FORMAT: display[0], format=37 bcm_video_analog_port_setup (fmt=7) SET FORMAT: display[1], format=7 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) Write AVS: 40set mute 0 (000) 1 40 00 00 00 00 18 62 00 02 00 00 00 ff Write AVS: 40 40 00 00 00 00 18 61 00 02 00 00 00 ff VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! bcmfb: disable manual blit VIDEO0: set blank to 0 sync is off so we enable it playback! total video delay: 0 (0 ms) VIDEO0: start decode flush video decoder VIDEO0 use saved pts 0xe10 (ret 0) VIDEO0: first pts 0x0 VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 no decoder left in sync handling so disable xpt_sync bcm_accel: invalid opcode! 00000080 bcmfb: enable manual blit tsmux set cisource reg 00 to val 44 tsmux set cisource reg 00 to val 44 tsmux set cisource reg 01 to val 34 tsmux set cisource reg 01 to val 44 tsmux set tsports reg 02 to val dc tsmux set tsports reg 02 to val dc tsmux set tsports reg 03 to val fe tsmux set tsports reg 03 to val fe bcm4506: channel 0 is in normale mode now bcm4506: channel 0 is sleeping now bcm4506: channel 1 is in normale mode now bcm4506: channel 1 is sleeping now tda: init complete tda: init complete VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! 1181416 ms: 100 15 ms: 0 2311 ms: 0 45 ms: 8 15 ms: 8 1 ms: 8 20 ms: 8 272 ms: 8 8 ms: 9 1 ms: 9 1 ms: 9 5110 ms: 9 7 ms: 28 83 ms: 28 66 ms: 28 7 ms: 29 9 ms: 29 2 ms: 29 2 ms: 29 210 ms: 29 10 ms: 29 30 ms: 29 105 ms: 30 1 ms: 30 14 ms: 30 221 ms: 30 26 ms: 31 7 ms: 31 0 ms: 31 3 ms: 31 12 ms: 31 7060 ms: 31 7 ms: 55 67 ms: 55 1 ms: 55 33 ms: 55 3 ms: 55 2 ms: 55 4 ms: 55 22 ms: 56 2 ms: 56 289 ms: 56 212 ms: 57 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set input to 0 set fb to 2(0) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set ac3 to downmix set aac to downmix set mute 0 (000) 1 96 ms: 58 13 ms: 58 303 ms: 59 309 ms: 59 34 ms: 60 50 ms: 61 19 ms: 61 tsmux set ciclk reg fe to val f0 tsmux set ciclk reg fe to val f0 tsmux set ciclk reg fe to val f0 tsmux set ciclk reg fe to val f0 25 ms: 61 2 ms: 61 10 ms: 61 27 ms: 61 12 ms: 61 57 ms: 61 92 ms: 61 12 ms: 62 1313 ms: 62 43 ms: 66 62 ms: 67 62 ms: 67 4632 ms: 67 13 ms: 83 3 ms: 83 5 ms: 83 18 ms: 83 13 ms: 83 84 ms: 83 43 ms: 84 3 ms: 84 118 ms: 84 30 ms: 84 24 ms: 84 3 ms: 84 30 ms: 84 30 ms: 85 71 ms: 85 14 ms: 85 22 ms: 85 188 ms: 85 72 ms: 87 8 ms: 88 79 ms: 88 186 ms: 88 12 ms: 89 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) 110 ms: 89 58 ms: 89 142 ms: 90 556 ms: 90 1844 ms: 93 44 ms: 99 8 ms: 99 1 ms: 99 NFS: bad mount option value specified: vers=4.2 NFS: bad mount option value specified: vers=4.1 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 NFS: bad mount option value specified: vers=4.0 CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: Error connecting to socket. Aborting operation VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0 ata2.00: BMDMA stat 0x4 ata2: SError: { } ata2.00: failed command: READ DMA EXT ata2.00: cmd 25/00:00:69:5b:bd/00:01:39:00:00/e0 tag 0 dma 131072 in res 51/40:3f:24:5c:bd/00:00:39:00:00/e0 Emask 0x9 (media error) ata2.00: status: { DRDY ERR } ata2.00: error: { UNC } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Unhandled sense code sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 39 bd 5c 24 sd 1:0:0:0: [sda] ASC=0x11 ASCQ=0x4 sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 39 bd 5b 69 00 01 00 00 end_request: I/O error, dev sda, sector 968711204 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0 ata2.00: BMDMA stat 0x4 ata2: SError: { } ata2.00: failed command: READ DMA EXT ata2.00: cmd 25/00:48:21:5c:bd/00:00:39:00:00/e0 tag 0 dma 36864 in res 51/40:37:24:5c:bd/00:00:39:00:00/e0 Emask 0x9 (media error) ata2.00: status: { DRDY ERR } ata2.00: error: { UNC } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Unhandled sense code sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 39 bd 5c 24 sd 1:0:0:0: [sda] ASC=0x11 ASCQ=0x4 sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 39 bd 5c 21 00 00 48 00 end_request: I/O error, dev sda, sector 968711204 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0 ata2.00: BMDMA stat 0x4 ata2: SError: { } ata2.00: failed command: READ DMA EXT ata2.00: cmd 25/00:08:21:5c:bd/00:00:39:00:00/e0 tag 0 dma 4096 in res 51/40:00:24:5c:bd/00:00:39:00:00/e0 Emask 0x9 (media error) ata2.00: status: { DRDY ERR } ata2.00: error: { UNC } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Unhandled sense code sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 39 bd 5c 24 sd 1:0:0:0: [sda] ASC=0x11 ASCQ=0x4 sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 39 bd 5c 21 00 00 08 00 end_request: I/O error, dev sda, sector 968711204 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0 ata2.00: BMDMA stat 0x4 ata2: SError: { } ata2.00: failed command: READ DMA EXT ata2.00: cmd 25/00:08:21:5c:bd/00:00:39:00:00/e0 tag 0 dma 4096 in res 51/40:00:24:5c:bd/00:00:39:00:00/e0 Emask 0x9 (media error) ata2.00: status: { DRDY ERR } ata2.00: error: { UNC } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Unhandled sense code sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 39 bd 5c 24 sd 1:0:0:0: [sda] ASC=0x11 ASCQ=0x4 sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 39 bd 5c 21 00 00 08 00 end_request: I/O error, dev sda, sector 968711204 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0 ata2.00: BMDMA stat 0x4 ata2: SError: { } ata2.00: failed command: READ DMA EXT ata2.00: cmd 25/00:08:21:5c:bd/00:00:39:00:00/e0 tag 0 dma 4096 in res 51/40:00:24:5c:bd/00:00:39:00:00/e0 Emask 0x9 (media error) ata2.00: status: { DRDY ERR } ata2.00: error: { UNC } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Unhandled sense code sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 39 bd 5c 24 sd 1:0:0:0: [sda] ASC=0x11 ASCQ=0x4 sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 39 bd 5c 21 00 00 08 00 end_request: I/O error, dev sda, sector 968711204 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x60000000 action 0x0 ata2.00: BMDMA stat 0x4 ata2: SError: { } ata2.00: failed command: READ DMA EXT ata2.00: cmd 25/00:08:21:5c:bd/00:00:39:00:00/e0 tag 0 dma 4096 in res 51/40:00:24:5c:bd/00:00:39:00:00/e0 Emask 0x9 (media error) ata2.00: status: { DRDY ERR } ata2.00: error: { UNC } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Unhandled sense code sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 39 bd 5c 24 sd 1:0:0:0: [sda] ASC=0x11 ASCQ=0x4 sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 39 bd 5c 21 00 00 08 00 end_request: I/O error, dev sda, sector 968711204 ata2: EH complete
Posted 15 April 2020 - 11:56
That disk is a swiss cheese...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 15 April 2020 - 12:42
It has more than done it's work, then...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 1 guests, 0 anonymous users